Optimal recovery of integral operators and its applications

In this paper we present the solution to a problem of recovering a rather arbitrary integral operator based on incomplete information with error. We apply the main result to obtain optimal methods of recovery and compute the optimal error for the solutions to certain integral equations as well as boundary and initial value problems for various PDE’s.     

Electrical Impedance Spectroscopic Study of CNT/Ethylene-alt-CO/Propylene-alt-CO Polyketones Nanocomposite

Impedance spectroscopy was utilized to investigate the dielectric properties, ac conductivity and charge transport mechanisms in propylene-alt-CO/ethylene-alt-CO (EPEC) random terpolymer filled with multi-walled carbon nanotubes (MWCNT) as a function of nanofiller content, frequency, and temperature. Equivalent resistor-capacitor (RC) circuit models were proposed to describe the impedance characteristics of the unfilled terpolymer and the nanocomposite at different temperatures. For the nanocomposites, the ac conductivity tended to be frequency independent at low frequencies. At high frequencies, the ac conductivity increased with frequency. The dc conductivity (i.e., plateau of the ac conductivity at low frequencies) at room temperature increased from 10^?9 (Ω·m)^?1 for the unfilled polymer to l0^?3 (Ω·m)^?1 for the 6 wt% MWCNT/EPEC nanocomposite. At low temperatures, the equivalent RC model for EPEC-0 and EPEC-2 was found to consist of a parallel RC circuit. However, for 6 wt% MWCNT/EPEC nanocomposite, an RC model consisting of an R/constant phase element (CPE) circuit and a resistor in series was required to describe the impedance behavior of the nanocomposite.     

Issue Information

Three‐dimensional direct numerical simulation results of flow past a circular cylinder are influenced by numerical aspects, for example the spanwise domain length and the lateral boundary condition adopted for the simulation. It is found that inappropriate numerical set‐up, which restricts the development of intrinsic wake structure, leads to an over‐prediction of the onset point of the secondary wake instability (Re_cr). A best practice of the numerical set‐up is presented for the accurate prediction of Re_cr by direct numerical simulation while minimizing the computational cost. The cylinder span length should be chosen on the basis of the intrinsic wavelength of the wake structure to be simulated, whereas a long span length is not necessary. For the wake transitions above Re_cr, because the wake structures no longer follow particular wavelengths but become disordered and chaotic, a span length of more than 10 cylinder diameters (approximately three times the intrinsic wavelength) is recommended for the simulations to obtain wake structures and hydrodynamic forces that are not strongly restricted by the numerical set‐up. The performances of the periodic and symmetry lateral boundary conditions are compared and discussed. The symmetry boundary condition is recommended for predicting Re_cr, while the periodic boundary condition is recommended for simulating the wake structures above Re_cr. The general conclusions drawn through a circular cylinder are expected to be applicable to other bluff body configurations. Copyright © 2017 John Wiley & Sons, Ltd.     

Characterizations of optimality in convex programming: the nondifferentiable case

Primal, dual and saddle-point characterizations of optimality are given for convex programming in the general case (nondifferentiable functions and no constraint qualification).     

Simulation of three‐dimensional flows over moving objects by an improved immersed boundary–lattice Boltzmann method

An improved immersed boundary–lattice Boltzmann method (IB–LBM) developed recently [28] was applied in this work to simulate three‐dimensional (3D) flows over moving objects. By enforcing the non‐slip boundary condition, the method could avoid any flow penetration to the wall. In the developed IB–LBM solver, the flow field is obtained on the non‐uniform mesh by the efficient LBM that is based on the second‐order one‐dimensional interpolation. As a consequence, its coefficients could be computed simply. By simulating flows over a stationary sphere and torus [28] accurately and efficiently, the proposed IB–LBM showed its ability to handle 3D flow problems with curved boundaries. In this paper, we further applied this method to simulate 3D flows around moving boundaries. As a first example, the flow over a rotating sphere was simulated. The obtained results agreed very well with the previous data in the literature. Then, simulation of flow over a rotating torus was conducted. The capability of the improved IB–LBM for solving 3D flows over moving objects with complex geometries was demonstrated via the simulations of fish swimming and dragonfly flight. The numerical results displayed quantitative and qualitative agreement with the date in the literature. Copyright © 2011 John Wiley & Sons, Ltd.     

Ab initio modelling of the interaction of H interstitials with grain boundaries in bcc Fe

Hydrogen that is accumulated within the grain boundaries can lead to a decrease of the critical strain required to fracture the material. The paper presents results of ab initio modelling of hydrogen–grain boundary interaction in ferromagnetic bcc iron. Modelling was performed using density functional theory with generalised gradient approximation (GGA’96), as implemented in WIEN2k package. Three fully relaxed tilt grain boundaries, Σ5(310), Σ5(210) and Σ3(111), were studied. The supercells contained 40–48 atoms, i.e. 20–24 atoms in each of the two ‘grains’. Calculated formation energies of grain boundaries is 1.44, 1.83 and 1.46 J/m² and the maximum binding (trapping) energies of hydrogen to the boundaries are 0.43, 0.83 and 0.39 eV, respectively. These values are close to other researchers’ data. The higher value of trapping energy of the Σ5(210) boundary is probably due to the asymmetrical atom configurations resulting from mutual rigid shift of the two grains that was necessary to be introduced to provide optimal distances between Fe atoms, unlike the other two boundary types.     

The Spin-Coating Process: Analysis of the Free Boundary Value Problem

In this paper, an accurate model of the spin-coating process is presented and investigated from the analytical point of view. More precisely, the spin-coating process is being described as a one-phase free boundary value problem for Newtonian fluids subject to surface tension and rotational effects. It is proved that for T > 0 there exists a unique, strong solution to this problem in (0, T) belonging to a certain regularity class provided the data and the speed of rotation are small enough in suitable norms. The strategy of the proof is based on a transformation of the free boundary value problem to a quasilinear evolution equation on a fixed domain. The keypoint for solving the latter equation is the so-called maximal regularity approach. In order to pursue in this direction one needs to determine the precise regularity classes for the associated inhomogeneous linearized equations. This is being achieved by applying the Newton polygon method to the boundary symbol.     

Mean curvature flow with free boundary – Type 2 singularities

In this paper we give sufficient conditions that guarantee the mean curvature flow with free boundary on a pinched cylinder develops a Type 2 curvature singularity. We additionally prove that Type 0 singularities may only occur at infinity.     

A coefficient identification problem for a mathematical model related to ductal carcinoma in situ

We consider a coefficient identification problem for a mathematical model with free boundary related to ductal carcinoma in situ (DCIS). This inverse problem aims to determine the nutrient consumption rate from additional measurement data at a boundary point. We first obtain a global‐in‐time uniqueness of our inverse problem. Then based on the optimization method, we present a regularization algorithm to recover the nutrient consumption rate. Finally, our numerical experiment shows the effectiveness of the proposed numerical method.