Diffusion in aqueous copper sulfate and copper sulfate-sulfuric acid solutions

Diffusion coefficients of copper sulfate-water and copper sulfate-sulfuric acid-water solutions have been determined at 25°C using conductimetric and diaphragm-cell techniques. The ternary diffusion measurements indicate that diffusion of sulfuric acid can produce large counterflows of copper sulfate and vice versa. If diffusion of copper sulfate in aqueous sulfuric acid solutions is treated as a binary process, the measured apparent diffusivities of copper sulfate can be 1 to 8% lower than the salt's true diffusivity. Equations are developed to predict transport coefficients from the concentrations and mobilities of the diffusing species.     

All Solid‐State pH Electrode Based on Titanium Nitride Sensitive Film

Titanium nitride was used as pH‐sensitive material to fabricate all solid‐state pH electrode. The fabrication and the response performance of the pH electrode were described in the paper. The TiN film electrode showed a linear response in the pH range of 2–12 with a near‐Nenstian response (?55 mV/pH). The response time was within 1 min, and the electrode had good reproducibility, stability and low sensitivities for different species. Compared with the glass pH electrode, the electrode exhibited some advantages, for example, without activation, rapid response and high mechanical strength. In addition, the electrode performed excellently in a corrosion medium containing F^?(1 M). Electrochemical behaviors of TiN electrode in Britton‐Robinson buffers were studied with Electrochemical Impedance Spectroscopy (EIS).     

Electron capture detector performance parameters in view of the response presentation forms

Summary Four most frequently used presentation forms of the ECD response are described. Equations describing the dependence of the sensitivity, linearity and minimum detectable concentration of the ECD working under constant frequency mode of operation on the pulse period are derived from Wenthworth’s kinetic model for all four forms mentioned above. The forms presented are compared on the basis of equations derived. Results of the calculations are given and some predictions are experimentally tested for sulphur hexafluoride. Good agreement was found between the predicted and observed relationships. Presented at the 15th International Symposium on Chromatography, Nürnberg, October 1984     

Magnetic field effects detected by exciplex fluorescence and preferential solvation in binary solvents. The effect of temperature

At 20–70 °C, the temperature has almost no effect on the semisaturation field,B _1/2, or on the magnetic effects detected by exciplex fluorescence (pyrene/N,N-dimethylaniline) in binary benzene-DMSO mixtures. In individual solvents (ethanol, methanol) heating leads to a noticeable increase in the magnetic effect, whileB _1/2 decreases. The results obtained corroborate a previously proposed hypothesis that polar microclusters are formed in binary solvents with components of different polarity. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1821–1823, October, 1993.     

Densities,Ultrasonic Speeds,Viscosities and Refractive Indices of Binary Mixtures of Benzene with Benzyl Alcohol,Benzonitrile, Benzoyl Chloride and Chlorobenzene at 303.15 K

Densities,ρ, ultrasonic speeds, u, viscosities,η, and refractive indices, n, of pure benzene, benzyl alcohol (BA), benzonitrile (BN), benzoyl chloride (BC), chlorobenzene (CB) and their thirty six binary mixtures, with benzene as common component, were measured at 303.15 K over the entire mole fraction range. From these experimental data the values of deviations in ultrasonic speed, △u, isentropic compressibility, △k_s,excess acoustic impedance, Z^E, deviation in viscosity, Dh, and excess Gibbs free energy of activation of viscous flow, G^*E, and partial molar isentropic compressibility, Kφ,2⁰ of BA, BN, BC and CB in benzene were computed. The variation of these derived functions with composition of the mixtures suggested the increased cohesion (molecular order) in the solution and that interaction (A-B)＞(A-A) or (B-B).Moreover, theoretical prediction of ultrasonic speed, viscosity and refractive index of all the four binary mixtures was made on the basis of empirical and semi-empirical relations by using the experimental values of the pure components. Comparison of theoretical results with the experimental values was made in order to assess the suitability of these relations in reproducing the experimental values of u, η and n. Also, molecular radii of pure liquids and the average molecular radii of binary mixtures were evaluated using the corresponding refractive indices of pure liquids and binary mixtures. The average molecular radii of binary mixtures were found to be additive with respect to mole fraction of the pure component.     

STUDIES ON PREPARATION OF INACTIVATED VACCINES FROM CELL CULTURES OF MINK ENTERITIS VIRUS (MEV) AND THEIR IMMUNITY

In this paper, superhigh reproductive rate strains of MEV with titre more than HA8192* or TCID50 log9.7 10 have been achieved both by cultivation in cell lines with different susceptibility to MEV and by isolating and identifying in field by the author. The systematic tests proved that S18 and L12 strains of MEV are the best strains for vaccine preparation. In this study, the best means for the tissue cultivation of MEV and the most advanced technological process for the production and detection of serum-free cell-cultured MEV fluids with super-high HA titre in batches in large quantities have been established for the first time. Optimum conditions for MEV inactivation were determined, and safe and effective inactivated vaccines with mineral oil or A1(OH)3 gel adjuvant were successfully prepared with serum-free cell-cultured MEV fluids. Both vaccines with different adjuvants can be manufactured in batches in large quantities and have been widely used all over China since 1986. The change laws of the imm     

Segregation of Sn in the binary CuSn and ternary CuSnSb alloy systems

Progression studies have been followed from Cu(111)‐ and Cu(100)Sn binaries to Cu(111)‐ and Cu(100)SnSb ternary‐alloy systems under the same experimental conditions. The segregation behaviour of Sn in the two orientations are explained. It is found that the kinetic segregation profiles of Sn in the ternary alloys shift to lower temperatures as compared to that in the binary. The Sn profile shift is mainly due to the decrease in the activation energy of Sn in the ternary systems. For a particular Cu orientation, the other segregation parameters that the Sn profiles depend on, like the pre‐exponential factor, segregation energy and the interaction coefficient, are found to be the same in the two systems. There is also a change in the equilibrium segregation profiles of Sn. In the ternary system, site competition between Sn and Sb causes the Sn to suffer exponential desegregation and eventual displacement from the surface. Copyright © 2006 John Wiley & Sons, Ltd.     

Effect of enzyme concentration on the dynamic behavior of a membrane-bound enzyme system

The dynamic behavior of the reaction-diffusion system, composed of glucose oxidase (EC 1.1.3.4) immobilized at a uniform concentration in a membrane, used as a glucose electrode is represented by a diffusion equation with a nonlinear reaction-term in one-dimensional space. The mathematical model is analyzed by computer simulation, that is, numerical integration of the equation under various initial and boundary conditions, to examine the effect of enzyme concentration on the response characteristics (responsiveness and linearity in response) of the electrode. The analysis of the responses of the system to stepwise changes in the boundary value (glucose concentration in simple solution) infers that the enzyme concentration governs the patterns of the spatial distributions of the substrates (glucose and dissolved oxygen) in steady states and transient responses. It is also revealed that the response characteristics of the electrode are optimized with concentration of immobilized enzyme and that the system establishes the steady states at the same spatial distributions of the substrates, regardless of the boundary value. The diffusion of the substrates and the oxygen concentration also have significant effects on the response characteristics of the electrode.     

Effects of fluorine atoms on the optical nonlinear response of stilbene derivatives

The effect of fluorine atoms on the second-order optical nonlinear response of 4-nitro-4′-methoxy-trans-stilbene and polyene derivatives containing up to three double bonds (n=1, 2, 3) has been investigated within a semiempirical context (PM3 Hamiltonian). Experimental data reported in literature indicate a β_vec(SHG) value of 34, 47 and 76 (×10⁻³⁰ esu) for n=1, 2, 3, respectively, at 0.65 eV in CHCl₃ solutions. Our calculations show that fluorinating the nitrophenyl group the β_vec(SHG) is doubled. Further increase in the second-order nonlinear response can be obtained fluorinating the CC bond linkers between the aromatic moieties.Besides, the effect of different donor-acceptor pairs has been studied and the results interpreted in the two-state model context.Some results concerning the third-harmonic generation (THG), γ (THG), are presented, and a possible interpretation proposed.