Large-scale collisional energy transfer in laser-pumped metastable Ca atoms: Excitation of resonance states of Ca II

We report the first experimental observation of the excitation of the 4p ² P _{3/2, 1/2} resonance states of Ca II (located at 74 720.4 and 74 497.5 cm^–1 above the ground state of Ca I) following pulsed-laser pumping of the 4s ^{2 1} S _O–4s4p ³P₁ intercombination transition of Ca I (E _ex = 15 210 cm^–1). Large scale collisional transfer of energy between the laser-excited atoms is believed to be responsible for this. This is possibly because sufficient time is available (_rad of the 4s4p ³ P ₁ state is approximately 350 µs) for collisions to build such a high level of excitation. Some interesting additional features of the fluorescence spectra of the laser-pumped Ca vapor, such as temperature dependence of the fluorescence intensities and evolution in time of some selected states, are also presented.     

Magnetic properties of amorphous Mn x B100−x alloys

Magnetic properties of amorphous Mn _x B_100–x alloys ranging fromx = 30 to 70 under high magnetic fields and low ac magnetic fields in the temperature range from 4.2 K to room temperature have been investigated. Samples which have Mn concentrations of aboutx = 40–60 show spin-glass-like properties in the low-temperature region. This spin-glass characteristics result from a frustration in the spin system which is caused by the competition of ferromagnetic and antiferromagnetic interactions between randomly distributed Mn atoms. Both magnetization at 4.2 K and paramagnetic momentP _eff as a function of Mn concentration show a peak aroundx 44 which drops rapidly towards both sides of the Mn content.     

The theoretical basis of column chromatography in multicomponent separations. Part 2: Peak capacity. Column systems with good selectivity

The selectivity of a column system, S, defined by equation 28, includes a variation coefficient (β) of plate number with capacity ratio which has a large influence on the peak capacity, as shown in Fig. 18. Some typical chromatograms are given. In order to predict S for a column system from Kovat's Index, equations 40 and 41 are given to calculate the constant of the carbon number rule for squalane at different temperatures or for different stationary phases. The specific retention value of heptane on squalane at different temperatures can be calculated from equation 42. The nonpolarity index, defined by equation 43, was used to calculate the retention value of heptane on various stationary phases. In liquid chromatography, the order of elution may be reversed by changing the composition of the eluent on the same chemically bonded silica (manufactured in China). The linear relations between the log retention values of different kinds of solutes or of a single solute on the silicas of different surface areas when using the same eluent are given.     

Preparation and Characterisation of Meloxicam Hydroxy Propyl <Emphasis Type="Italic">β</Emphasis>-Cyclodextrin Inclusion Complex

Meloxicam is a non steroidal anti inflammatory drug, used in the treatment of rheumatoid and osteoarthiritis. It is practically insoluble in water and its prolonged use is associated with the incidence of side effects like gastro intestinal perforations, ulcerations and bleeding. Therefore, an attempt has been made to improve the aqueous solubility of the drug by making an inclusion complex using hydroxy propyl β cyclodextrin(HPβ-CD). The complexes were prepared by physical mixture and freeze drying method. The different methods employed for evaluation such as DSC, XRD, SEM and FT-IR studies indicated complete formation of the complex by freeze drying method in a molar ratio of 1:2. The prepared complexes showed improved in-vitro dissolution profile as compared to the pure drug.     

Polyol-Metall-Komplexe. 25. rac-Mannose,rac-Arabit und L-Threit als deprotonierte Liganden in Ferraten(III)

Polyol Metal Complexes. 25. rac-Mannose, rac-Arabitol and L -Threitol as Deprotonated Ligands in Ferrates(III ) Ba₂[Fe₂(β-rac-ManfH_?5)₂] · 12H₂O ( 1 ), Sr₄[Fe₄(rac-Arab1,2,3,5H_?4)₄(OH)₂]CO₃ · 33 H₂O ( 2 ), and Ba₂[Fe₂(L-ThreH_?4)₂(OH)₂] · 12.5 H₂O ( 3 ) (Man = mannose, Arab = arabitol, Thre = threitol) have been crystallized from alkaline aqueous solution. Crystal structure analysis revealed dinuclear ferrate(III ) ions for 1 and 3 , the former being a C_i-symmetrical homoleptic ferric complex with pentadentate pentaanions derived from racemic β-mannofuranose. In 3 , besides tetradentate L -threitolato ligands, there is one terminal hydroxo ligand at each ferric center. Hydroxo ligands are also present in the C_i-symmetrical hexaanions of 2 , which are tetranuclear planar entities built up from four edge-sharing FeO₆ octahedra. However arabitol is a pentitol, the tetraanionic ligands are only tetradentate for steric reasons.     

Micro construction of poly(epsilon-caprolactone)/poly(L-lactic acid) blend film by solution casting under microwave irradiation

The micro construction of poly(epsilon-caprolactone) (PCL) and poly(L-lactic acid) (PLLA) blend films fabricated by solution casting under microwave irradiation was investigated by selective enzymatic degradation and scanning electron microscopy (SEM). The results were totally different from the blends obtained by conventional methods. The blend was more homogeneous and the PCL continuous phase more compact as no spherulites and tiny zone separation were observed from the film surface and no PCL network was observed inside the film, and the degradation of a PCL plank by Pseudomonas lipase was significantly retarded. The distributed PLLA micro spheres were enlarged and amorphous. The thermal behavior of the blend by microwave heating revealed that PCL and PLLA underwent a melting process, which induced the variations of the PCL phase and PLLA spheres. The weight loss caused by degradation of the PCL/PLLA blend obtained by conventional methods (B50c) is greater than that of the blend obtained by microwave methods (B50m), which reflects the change in morphology from a loose PCL network (B50c) to a dense PCL plank (B50m).     

Enzymatic hydrolysis reaction of phospholipids in monolayers

The hydrolysis reaction of , and , -dipalmitoylphosphatidylcholine (DPPC) catalized by bee venom phospholipase A₂ was studied in spreading monolayer at the water/air interface. DPPC and the hydrolysis products, palmitic acid and -lysophosphatidylcholine, palmitoyl were characterized at the interface by means of surface pressure, surface potential and ellipsometric measurements. Furthermore, mixed monolayers of reagents and products were investigated to ascertain their miscibility. The results show that the hydrolysis reaction can be followed by the decrease of surface pressure with time on subphases containing β-cyclodextrin, a well-known complexing agent of many amphiphilic compounds. The order of the reaction, the kinetic constant and other kinetic parameters are deduced.     

Role of solvent in the compatibility of a vinylchloride–vinylacetate–maleic acid terpolymer and nitrocellulose blends

The compatibility of cast films of a vinylchloride–vinylacetate–maleic acid terpolymer (VMCH) and nitrocellulose (NC) blends is influenced by solvents. Transparent films of VMCH/NC blends are obtained when cast from solvents such as tetrahydrofuran or cyclohexanone, whereas hazy films are obtained when cast from solvents such as acetone or ethylacetate. Visible spectroscopy and phase morphology were used to analyse the compatibility–incompatibility of the blend. Differential scanning calorimetry (DSC) studies demonstrate that the transparent film is compatible, but the hazy film is incompatible. Fourier transform infra-red (FTIR) studies establish that a greater interaction is observed between the polymer pair in case of the compatible blend than in the case of the incompatible blend. A solvent dependency of blend compatibility is reflected in this study. The conformational state of the polymers in solution, which is responsible for the compatibility phenomena, may depend on the donor number and/or Taft-β value of the solvent. The greater the donor number and/or the Taft-β value, the higher may be the level of interaction between the solvent and the polymer molecules, which in turn may give a compatible blend after removal of the solvent.     

Temperature-sensitive luminescence of tris (β-diketone) europium chelates for monitoring high-speed cationic photopolymerizations

The temperature-dependent luminescence of tris (β-diketone) chelates of europium was used for in situ temperature measurements during cationic photopolymerizations of vinyl ethers. These molecular-level luminescent probes provided a real-time, noninvasive method for monitoring temperature during these high-speed polymerizations. Two specific probes, tris (benzoyl-1, 1, 1-trifluoroacetone) europium and tris (1,1,1,5,5,5,-hexafluoroacetylacetone) europium, met several stringent spectral and performance requirements for application in our system. The luminescence from these probes exhibits a reproducible temperature dependence over a wide temperature range and is not sensitive to changes in viscosity. In situ temperature profiles obtained using this novel technique verified the importance of thermal effects during these highly exothermic photopolymerizations. These studies have demonstrated the utility of the tris(β-diketone) europium chelates for characterizing the temperature during high-speed photopolymerizations that cannot be monitored using conventional techniques. © 1995 John Wiley & Sons, Inc.