2003—2007年中国儿童铅中毒率的分析研究——发铅检测结果

通过计算机检索收集了2003—2007年间公开发表的、关于儿童发铅水平和铅中毒率的中文文献,对涉及8省16万人作了调查分析。结果表明,近5年内中国儿童的平均发铅水平为7.5μg/g,铅中毒率平均为27.5%,与同一时期血铅检测结果一致。     

Heating rate effect on the DSC kinetics of oil shales

This research was aimed to investigate the combustion and kinetics of oil shale samples (Mengen and Himmetoğlu) by differential scanning calorimetry (DSC). Experiments were performed in air atmosphere up to 600°C at five different heating rates. The DSC curves clearly demonstrate distinct reaction regions in the oil shale samples studied. Reaction intervals, peak and burn-out temperatures of the oil shale samples are also determined. Arrhenius kinetic method was used to analyze the DSC data and it was observed that the activation energies of the samples are varied in the range of 22.4–127.3 kJ mol⁻¹ depending on the oil shale type and heating rate.     

Substitution reactions of gaseous ions in a three‐dimensional quadrupole ion trap

Substitution reactions between gaseous ions and neutral substrate molecules are of ongoing high interest. To investigate these processes in a qualitative and quantitative manner, we have constructed a device, with which a defined amount of a volatile substrate can be mixed with a defined amount of helium gas and added into a three‐dimensional quadrupole ion trap. From the known inner volume of the device, the known ratio n_substrate:n_He of the mixture, and the determined absolute partial pressure of helium in the ion trap, we can derive the partial pressure of the substrate in the ion trap and, thus, convert the directly observable pseudo–first‐order rate constants of the substitution reactions into absolute bimolecular rate constants. We have tested the device by investigating a series of S_N2 reactions of Br ^? and CF₃CH₂O ^? anions as well as ligand exchange reactions of ligated Na⁺ cations. As the obtained results suggest, the described device makes it possible to determine the bimolecular rate constants of substitution reactions as well as other ion‐molecule reactions with satisfactory accuracy and reliability.     

Average Arrival Time: an Alternative Approach for Studying Fluorescent Behavior of Single Quantum Dots?

Due to photoluminescence intermittency of single colloidal quantum dots (QDs), the traditional exponential fluorescence lifetime analysis is not perfect to characterize QDs' fluorescent emission behavior. In this work we used the time-tagged time-resolved (TTTR) mode to record the fluorescent photons from single QDs. We showed that this method is compatible with the traditional lifetime analysis. In addition, by constructing the trajectory over time and the distribution of average arrival time (AAT) of the fluorescent photons, more details about the emission behavior of QDs were revealed.     

Vacuum-assisted headspace solid phase microextraction: Improved extraction of semivolatiles by non-equilibrium headspace sampling under reduced pressure conditions

A new headspace solid-phase microextraction (HSSPME) procedure carried out under vacuum conditions is proposed here where sample volumes commonly used in HSSPME (9 mL) were introduced into pre-evacuated commercially available large sampling chambers (1000 mL) prior to HSSPME sampling. The proposed procedure ensured reproducible conditions for HSSPME and excluded the possibility of analyte losses. A theoretical model was formulated demonstrating for the first time the pressure dependence of HSSPME sampling procedure under non equilibrium conditions. Although reduced pressure conditions during HSSPME sampling are not expected to increase the amount of analytes extracted at equilibrium, they greatly increase extraction rates compared to HSSPME under atmospheric pressure due to the enhancement of evaporation rates in the presence of an air-evacuated headspace. The effect is larger for semivolatiles whose evaporation rates are controlled by mass transfer resistance in the thin gas film adjacent to the sample/headspace interface. Parameters that affect HSSPME extraction were investigated under both vacuum and atmospheric conditions and the experimental data obtained were used to discuss and verify the theory. The use of an excessively large headspace volume was also considered. The applicability of Vac-HSSPME was assessed using chlorophenols as model compounds yielding linearities better than 0.9915 and detection limits in the low-ppt level. The repeatability was found to vary from 3.1 to 8.6%.     

Misclassification rates,critical values and size of the design in measurement systems capability studies

Measurement systems capability analysis aims to test if the variability of a measurement system is small relative to the variability of a monitored process. At present some open questions are related both to the interpretation of the critical values of the indices typically used by practitioners to assess the capability of a gauge and to the choice of the size of the experimental design to test the repeatability and the reproducibility of the measurement process. In this paper, starting from the misclassification rates of a measurement system, we present a solution to these issues. Copyright © 2009 John Wiley & Sons, Ltd.     

Influence of reaction gas flows on the properties of SiGe:H thin film prepared by plasma assisted reactive thermal chemical vapour deposition

A new preparing technology, very high frequency plasma assisted reactive thermal chemical vapour deposition （VHFPA-RTCVD）, is introduced to prepare SiGe：H thin films on substrate kept at a lower temperature. In the previous work, reactive thermal chemical vapour deposition （I~TCVD） technology was successfully used to prepare SiGe：H thin films, but the temperature of the substrate needed to exceed 400℃. In this work, very high frequency plasma method is used to assist RTCVD technology in reducing the temperature of substrate by largely enhancing the temperature of reacting gases on the surface of the substrate. The growth rate, structural properties, surface morphology, photo- conductivity and dark-conductivity of SiGe：H thin films prepared by this new technology are investigated for films with different germanium concentrations, and the experimental results are discussed.     

Corrosion Products Formed on Mild Steel Samples Submerged in Various Aqueous Solutions

Corroded samples, from the steel shell of an industrial evaporator system were investigated. A protective magnetite layer had formed, which subsequently dissolved in localised areas, resulting in failure of the shell. To clarify the mechanisms involved, mild steel samples of similar composition to the steel shell were submerged in the condensate and experiments were performed at room temperature and at 90°C under both static and dynamic conditions for exposure times up to 30 days. Control samples were submerged in deionised water under similar conditions. The dynamic corrosion rates in the industrial condensate were a factor of 2 higher than the rates for the deionised water, whilst static corrosion rates, measured in both media, were lower by a factor of 3 to 4 found for the dynamic experiments. The corrosion products were identified by means of CEMS analyses. The main components were magnetite and oxyhydroxides of iron. Additional to the species mentioned, -Fe₂O₃, goethite and hematite formed.     

Compound Poisson Approximation of the Number of Exceedances in Gaussian Sequences

Consider a finite sequence of Gaussian random variables. Count the number of exceedances of some level a, i.e. the number of values exceeding the level. Let this level and the length of the sequence increase simultaneously so that the expected number of exceedances remains fixed. It is well-known that if the long-range dependence is not too strong, the number of exceeding points converges in distribution to a Poisson distribution. However, for sequences with some individual large correlations, the Poisson convergence is slow due to clumping. Using Steins method we show that, at least for m-dependent sequences, the rate of convergence is improved by using compound Poisson as approximating distribution. An explicit bound for the convergence rate is derived for the compound Poisson approximation, and also for a subclass of the compound Poisson distribution, where only clumps of size two are considered. Results from numerical calculations and simulations are also presented.     

A finite‐capacity queue with exhaustive vacation/close‐down/setup times and Markovian arrival processes

We consider a finitecapacity singleserver vacation model with closedown/setup times and Markovian arrival processes (MAP). The queueing model has potential applications in classical IP over ATM or IP switching systems, where the closedown time corresponds to an inactive timer and the setup time to the time delay to set up a switched virtual connection (SVC) by the signaling protocol. The vacation time may be considered as the time period required to release an SVC or as the time during which the server goes to set up other SVCs. By using the supplementary variable technique, we obtain the queue length distribution at an arbitrary instant, the loss probability, the setup rate, as well as the Laplace–Stieltjes transforms of both the virtual and actual waiting time distributions.