Multi‐Colored Fibers by Self‐Assembly of DNA,Histone Proteins,and Cationic Conjugated Polymers

The development of biomolecular fiber materials with imaging ability has become more and more useful for biological applications. In this work, cationic conjugated polymers (CCPs) were used to construct inherent fluorescent microfibers with natural biological macromolecules (DNA and histone proteins) through the interfacial polyelectrolyte complexation (IPC) procedure. Isothermal titration microcalorimetry results show that the driving forces for fiber formation are electrostatic and hydrophobic interactions, as well as the release of counterions and bound water molecules. Color‐encoded IPC fibers were also obtained based on the co‐assembly of DNA, histone proteins, and blue‐, green‐, or red‐ (RGB‐) emissive CCPs by tuning the fluorescence resonance energy‐transfer among the CCPs at a single excitation wavelength. The fibers could encapsulate GFP‐coded Escherichia coli BL21, and the expression of GFP proteins was successfully regulated by the external environment of the fibers. These multi‐colored fibers show a great potential in biomedical applications, such as biosensor, delivery, and release of biological molecules and tissue engineering.     

N‐Alkylacylamides in Thin Films Display Infrared Spectra of 310‐, α‐, and π‐Helices with Visible Static and Dynamic Growth Phases

A peptide model is a physical system containing a CONH group, the simplest being HCONHCH₃, N‐methylformamide (NMF). We have discovered that NMF and N‐methylacetamide (NMA), which form hydrogen‐bonded oligomers in thin films on a planar AgX fiber, display infrared (IR) spectra with peaks like those of polypeptide helices. Structures can be assigned by their amide I maxima near 1672 (3₁₀), 1655 (3₁₀), 1653 (α), 1655 (π), and 1635 cm^?1 (π), which are the first IR data for the π‐helix. Sharp peaks are an outcome of immobilization of polar species on the polar surface of silver halides. We report the first use of expanded thin‐film IR spectroscopy, in which plots of every spectrum over the amide I–II range show pauses or slow stages in the increase or decrease of absorption. These are identified as static phases followed by dynamic phases, with the incremental gain or loss of a helix turn. A general theory can be stated for such processes. Density functional calculations show that the NMA α‐helix pentamer (crystal structure geometry) is transformed into a π‐helix‐like form. For the first time, an entire sequence (3₁₀‐helix, α‐helix, π‐helix, quasiplanar species) of spectra has been recorded for NMA.     

Anisotropic Protein Organofibers Encoded With Extraordinary Mechanical Behavior for Cellular Mechanobiology Applications

Hydrogels enable a variety of applications due to their dynamic networks, structural flexibility, and tailorable functionality. However, their mechanical performances are limited, specifically in the context of cellular mechanobiology. It is also difficult to fabricate robust gel networks with a long-term durability. Thus, a new generation of soft materials showing outstanding mechanical behavior for mechanobiology applications is highly desirable. We combined synthetic biology and supramolecular assembly to prepare elastin-like protein (ELP) organogel fibers with extraordinary mechanical properties. The mechanical performance and stability of the assembled anisotropic proteins are superior to other organo-/hydrogel systems. Bone-derived mesenchymal cells were introduced into the organofiber system for stem-cell lineage differentiation. This approach demonstrates the feasibility of mechanically strong and anisotropic organonetworks for mechanobiology applications and holds great potential for tissue-regeneration translations.     

Single-Carbon-Fiber-Powered Microsensor for In Vivo Neurochemical Sensing with High Neuronal Compatibility

The development of new principles and techniques with high neuronal compatibility for quantitatively monitoring the dynamics of neurochemicals is essential for deciphering brain chemistry and function but remains a great challenge. We herein report a neuron-compatible method for in vivo neurochemical sensing by powering a single carbon fiber through spontaneous bipolar electrochemistry as a new sensing platform. By using ascorbic acid as a model target to prove the concept, we found that the single-carbon-fiber-powered microsensor exhibited a good response, high stability and, more importantly, excellent neuronal compatibility. The microsensor was also highly compatible with electrophysiological recording, thus enabling the synchronous recording of both chemical and electrical signals. The sensing principle could be developed for in vivo monitoring of various neurochemicals in the future by rationally designing and tuning the electrochemical reactions at the two poles of the carbon fiber.     

The effect of short glass fibers on the process behavior of polyamide 12 during selective laser beam melting

In additive manufacturing, polymer composites are used for setting tailored properties. Short glass fibers can be used as fillers for polyamide 12 for enhancing stiffness or tensile strength as well as for reducing shrinkage. In this paper, the effects of short glass fibers on polyamide 12 concerning powder properties, process behavior and part properties in laser beam melting of polymers (SLS) are investigated. It could be shown that by increasing the short glass fiber content powder properties as well as part properties are immensely affected. By adding glass fibers, powder properties, like flowability and diffuse reflection decrease. The isothermal crystallization changes resulting in a narrower processing window. Concerning mechanical properties, short glass fibers allow for a higher stiffness until a critical limit of filler concentration within this study is reached, after which the tensile strength decreases. The elongation of break decreases by rising the filler content.     

Preparation of Ag/C fiber with nanostructure through in situ thermally induced redox reaction between PVA and AgNO3 and its catalysis for 4‐nitrophenol reduction

A novel synthesized Ag/C fibrous catalyst based on in situ thermally induced redox reaction of PVA/AgNO₃ composite fibers was proposed. Utilizing the plasticization and complexation of AgNO₃ solution, the melt spinning of PVA/AgNO₃ composites was accomplished. Through the in situ thermally induced redox reaction on PVA/AgNO₃ composite fibers combined with carbonization of PVA and reduction of Ag+, the synthesized Ag/C fibrous catalyst was prepared with nanosilver particles with average diameter of 130 nm immobilized on the loose microstructural carbon layers. The synthesized Ag/C fibrous catalyst exhibited excellent catalytic activity and reused for at least five cycles for the reduction of 4‐nitrophenol, which may hold great promise in effective and eco‐friendly waste water treatment.     

The Identification of Cotton Fibers Dyed with Reactive Dyes for Forensic Purposes

Some of the most common microtraces that are currently collected at crime scenes are fragments of single fibers. The perpetrator leaves them at a crime scene or takes them away, for example, on their clothing or body. In turn, the microscopic dimensions of such traces mean that the perpetrator does not notice them and therefore usually does not take action to remove them. Cotton and polyester fibers dyed by reactive and dispersion dyes, respectively, are very popular within clothing products, and they are hidden among microtraces at the scene of a crime. In our recently published review paper, we summarized the possibilities for the identification of disperse dyes of polyester fibers for forensic purposes. In this review, we are concerned with cotton fibers dyed with reactive dyes. Cotton fibers are natural ones that cannot easily be distinguished on the basis of morphological features. Consequently, their color and consequently the dye composition are often their only characteristics. The presented methods for the identification of reactive dyes could be very interesting not only for forensic laboratories, but also for scientists working in food, cosmetics or pharmaceutical/medical sciences.     

Bioinspired and Mechanically Strong Fibers Based on Engineered Non‐Spider Chimeric Proteins

Silk‐protein‐based fibers have attracted considerable interest due to their low weight and extraordinary mechanical properties. Most studies on fibrous proteins focus on the recombinant spidroins, but these fibers exhibit moderate mechanical performance. Thus, the development of alternative structural proteins for the construction of robust fibers is an attractive goal. Herein, we report a class of biological fibers produced using a designed chimeric protein, which consists of the sequences of a cationic elastin‐like polypeptide and a squid ring teeth protein. Remarkably, the chimeric protein fibers exhibit a breaking strength up to about 630 MPa and a corresponding toughness as high as about 130 MJ m^?3, making them superior to many recombinant spider silks and even comparable to some native counterparts. Therefore, this strategy is a novel concept for exploring bioinspired ultrastrong protein materials through the development of new types of structural chimeric proteins.     

A literature review on the in situ generation of reinforcing fibers

Liquid crystal polymers (LCPs) are a relatively new class of materials. These polymers usually consist of rigid rodlike molecular chains and they are capable of forming highly oriented structures even in the as-made product, with strength/modulus significantly higher than those of the conventional flexible chain polymers. Blending of LCPs with conventional polymers produces composite-like structures with LCPs serving as the reinforcing component. The properties of the blends are affected by the size, shape and distribution of the LCPs in the matrix polymer, which in turn are related to the processing conditions such as the blend composition, the extrusion and drawing conditions, the viscosity ratio of the component polymers and the type and grade of the LCPs and the matrix polymers. Improved processability of the blend due to the reduction in viscosity and the improved interfacial adhesion between reinforcing fibers and the matrix polymer are among the advantages of these materials over the conventional short fiber reinforced composites. This paper gives a brief review of the work currently available in the literature on rheology, fabrication, blend morphology and mechanical/thermal properties of the in situ composites from blends of LCPs and conventional polymers.     

高双折射微结构光纤特性的研究

采用基于单轴各向异性完美匹配层吸收边界的频域有限差分方法研究一种椭圆芯高双折射微结构光纤的特性.通过计算,分析了空气孔尺寸和孔距对模式双折射、泄漏损耗以及模式截止波长的影响;综合研究了双折射微结构光纤的几种特性及其相互之间的影响和制约关系;并首次采用有效面积的方法研究高双折射微结构光纤的模式截止特性,分析单模传输条件;从而为高双折射微结构光纤的设计提供了一定的理论依据.