疏水缔合型增稠剂聚(丙烯酰胺-丙烯酸高级酯)的合成及增稠性能研究

采用沉淀聚合法合成了聚（丙烯酰胺－丙烯酸十四酯），聚（丙烯酰胺－丙烯酸十六酯）和聚（丙烯酰胺－丙烯酸十八酯），重点讨论了共聚物中疏水基团数量及疏水基团链长对增稠性能的影响。采用凯达尔定氮法和动态热分析（DMTA）测定了共聚物的组成及玻璃化温度。     

Rheology of polystyrene solutions around the coil overlapping concentration: A phenomenological description of stresses in simple shear flow

Linear viscoelasticity behavior is described with the sum of two terms for polystyrene solutions in tricresyl phosphate around the coil overlapping concentration (K. Osaki, T. Inoue, & T. Uematsu, J Polym Sci Part B: Polym Phys 2001, 39, 211). One is a Rouse–Zimm (RZ) term represented by the Zimm theory with arbitrarily chosen values of the hydrodynamic interaction parameter and the longest relaxation time (τ_RZ). The other (the L term) consists of a relaxation mode with a single relaxation time (τ_L > τ_RZ) and a high‐frequency limiting modulus proportional to the square of the concentration. In this study, we describe the viscosity (η) and first normal stress coefficient (Ψ₁) in steady shear with simple formulas. The stress due to the L term is assumed to be given by a Kaye, Bernstein, Kearsley, and Zapas (K‐BKZ) equation with the damping function h(γ) = (1 + 0.2γ²)^?1/2, where γ is the magnitude of shear. Contributions to η and Ψ₁ from the RZ term are derived from the RZ model, in which the relaxation time in steady flow is given by τ_st = τ + (τ_RZ ? τ)/(1 + 0.35τ_RZ γ˙) instead of τ_RZ. Here, γ˙ is the rate of shear, and τ is the τ_RZ value at the infinite dilution limit. η and Ψ₁ at various concentrations for two polystyrene samples (with molecular weights of 2890 and 8420 kg mol^?1) are well described with parameters derived from dynamic viscoelasticity. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1038–1045, 2002     

Optically clear simultaneous interpenetrating polymer networks based on poly(ethylene glycol) diacrylate and epoxy. I. Preparation and characterization

Poly(ethylene glycol) diacrylate was synthesized from poly(ethylene glycol) of molecular weight 600 with acryloyl chloride in a molar ratio of 1:2. Poly(ethylene glycol) diacrylate (PEGDA) was then blended with diglycidyl ether of bisphenol A (DGEBA) in various ratios, followed by curing with 2,2′-azobisisobutyronitrile (AIBN) and isophronediamine (IPDA) simultaneously. Viscosity changes before and during IPN formation were examined with a Brookfield viscometer. Formation of H-bonding and functional group changes were investigated with FTIR. Exothermic curing thermograms were recorded with dynamic DSC. Optically clear IPNs thus obtained were characterized with rheometric dynamic spectroscopy (RDS) and scanning electron microscopy (SEM) to check possible compatibility of the two networks. Experimental results revealed that during IPN formation hydrogen bonds between PEGDA and DGEBA and interlock of networks had profound effect on viscosity change and pot-life. Complete compatibility of the IPNs was found as DGEBA content was higher than 50% by weight. The compatibility between PEGDA and DGEBA networks was evidenced from inner shift of a single damping peak in RDS. In the meantime, SEM micrographs confirmed the coincidence with the result of RDS © 1992 John Wiley &Sons, Inc.     

Microphase separation of PEG-modified urethane acrylate and the swelling behavior of its gels

The viscosity of PEG-modified urethane acrylate (PMUA) showed peculiar behavior in the course of soap-free emulsification. Moreover, the viscosity change with added amounts of water was influenced by the reaction molar ratio of polyethylene glycol (PEG). The rate of increase in viscosity slowed and the ratio of increase in viscosity increased as the reaction molar ratio of PEG increased. This peculiar viscosity behavior was due to the microphase separation between hydrophilic and hydrophobic segments of PMUA, and the orientation of polyoxyethylene groups at O/W interface which influenced droplet size of the soap-free PMUA emulsion. The location of polyoxyethylene groups of this resin at O/W interface was confirmed using the adsorption isotherm measurement of PMUA molecules containing polyoxyethylene groups at water/benzene interface. The microphase separation behavior of PMUA between hydrophilic and hydrophobic segments could apply to the preparation of the PMUA gels containing peculiar structure. PMUA gels were prepared using dioxane (UAG) and the swelling behavior of these gels were compared to that of gels prepared using water (UAHG) in the same medium. In the same medium, the swelling behavior of UAHG gels differed from that of UAG gels because of the difference in the microstructure of gel due to the microphase separation between hydrophilic and hydrophobic segments. This phase separation in the course of gelation in water could be confirmed using contact angle measurement.     

Viscosities ofn-alkylamines from 15 to 80°C

The viscosities of seven n-alkylamines from n-butylamine to n-decylamine were determined from 15 to 80°C at 5°C intervals. The intrinsic volumes were determined by extrapolation of the plot of fluidity against molar volume to zero fluidity and found to be a linear function of the number of carbon atoms. Plots of the logarithm of viscosity vs. reciprocal absolute temperature were almost linear. The energies of activation for viscous flow for the n-alkylamines were calculated and found to increase with increase in the carbon number. The B values, based on Hildebrand's equation and representing a measure of a molecules resistance to transport of momentum, were calculated for each of the n-alkylamines. A modified form of the equation describing the change fluidity with temperature was then formulated. It is suggested that the activation energy for viscous flow consists of the sum of the energy required for the expansion of the void volume and the energy required to overcome intermolecular interactions. These energies were calculated and discussed.     

粘度国家基准装置测量结果的不确定度

分析粘度国家基准装置测量结果不确定度的来源并进行评定。影响粘度国家基准装置测量不确定度的主要因素有温度、时间、表面张力、空气浮力以及动能修正等。根据2002年粘度国家基准量值复测的结果，以及改造后新基准装置和辅助设备的状态，计算得粘度国家基准装测量结果的扩展不确定度为0.038%-0.4%。     

Excess Molar Volume and Viscosity of Isobutyric Acid + Water Binary Mixtures Near and Far Away from the Critical Temperature

The excess molar volume V^E, shear viscosity deviation Δη and excess Gibbs energy of activation ΔG^∗E of viscous flow have been investigated by using density (ρ) and shear viscosity (η) measurements for isobutyric acid + water (IBA+W) mixtures over the entire range of mole fractions at five different temperatures, both near and close to the critical temperature (2.055K ≤ (T−T_c)≤ 13.055K). The results were also fitted with the Redlich–Kister equation. This system exhibited very large negative values of V^E and very large positive values of Δη due to increased hydrogen bonding interactions and correlation length between unlike molecules in the critical region and to very large differences between the molar volumes of the pure components at low temperatures. The activation parameters ΔH^∗ and ΔS^∗ have been also calculated and show that the critical region has an important effect on the volumetric properties.     

一种新的判断高分子相容性的粘度判据

依据最近提出的高分子稀溶液粘度的浓度 依赖性的团簇理论 ,对高分子‘理想混合物’的定义进行了更新的理论分析 .在此基础上提出了一个新的判定高分子相容性的粘度判据 .从现有的大量实验数据看 ,该判据是和事实相符合的     

Fabrication of PbTiO3 Ceramic Fibers by Sol-Gel Processing

The sol-gel processing was applied to the fabrication of PbTiO₃ fibers. Pb(CH₃COO)₂·3H₂O and Ti(OC₃H ₇ ⁱ )₄ were refluxed with stirring in 2-methoxyethanol to form Pb-methoxyethoxide and Ti-methoxyethoxide, respectively, followed by mixing with stirring in 2-methoxyethanol to form Pb−Ti double alkoxide. The hydrolysis and polycondensation reaction of this double alkoxide gave polymerized products, and as a result the viscosity of the solution increased, suggesting that linear polymers were produced through the hydrolysis and polycondensation reaction. Homogeneous PbTiO₃ gel fibers were drawn from the spinnable viscous solutions, which were wellcrystallized into perovskite type PbTiO₃ at 650°C. The heat-treated fibers were a few centimeters long and from 10 to 100 μm in diameter. The fiber was made up of extremely uniform grains. Electron diffraction revealed a preferred growth of (101) planes along the fiber axis, which might be due to the linear molecular characteristics of the alkoxide.     

Viscosities of poly(N-vinylacetamide) solutions in the presence of salts, urea and guanidine hydrochloride

Summary  In the aqueous solutions of poly(N-vinylacetamide) in the presence of Na₂SO₄ or (NH₄)₂SO₄, the intrinsic viscosities were small and the Huggins constants were large compared with those in water. Similar but much less effects were observed for NaF. Opposite effects were found, however, for NaSCN. The poor solvent quality of aqueous sulfate solutions was significantly improved by the addition of guanidine hydrochloride to 3 M or higher. Urea was much less effective in improving the solvent quality. The different M28.8neffects observed between urea and GdnHCl may be explained by their different binding affinities to amide group. Solubilization of PNVA flocculates induced by the presence of 0.8 M Na₂SO₄ took place by adding urea to 1 M, although only small changes were detected in the viscosity behavior accompanying the addition of 1 M urea. Received: 12 June 1997 Accepted: 4 August 1997