纳米颗粒团聚物流化特性的数值研究

基于气固两相流体动力学理论,建立气体纳米颗粒团聚物两相流动双流体模型.模型中采用了Jung ＆ Gidaspow (2002)测量的固相应力模量和王垚等(2001)提出的聚团曳力系数计算模型.对纳米颗粒团聚物的流化过程进行了数值模拟,得到纳米颗粒团聚物的流化特性.模拟得出的床层膨胀比与文献中实验的结果较为接近.     

双面加热环形通道内干涸点的确定

根据环形管通道内流体流动和换热的特点,以Kirillov和Smogalev提出的干涸点理论模型假设为基础,从最基本的质量守恒方程出发,并引入临界液膜厚度等相应的辅助模型,得到了双面加热环形通道内流动沸腾干涸点的理论模型。同时针对间隙为1.0mm和1.5mm的环形窄缝进行了低压低质量流速工况下干涸点的实验研究。比较发现理论模型预测值与实验结果基本相符。说明本文提出的理论模型适用于低压低流量条件下的窄环形通道。实验同时发现:环状流临界热流密度在系统压力为2.2MPa达到最大值,临界含汽量随质量流速的增大呈缓慢下降趋势。     

Estimation in the continuous time mover‐stayer model with an application to bond ratings migration

The usual tool for modelling bond ratings migration is a discrete, time‐homogeneous Markov chain. Such model assumes that all bonds are homogeneous with respect to their movement behaviour among rating categories and that the movement behaviour does not change over time. However, among recognized sources of heterogeneity in ratings migration is age of a bond (time elapsed since issuance). It has been observed that young bonds have a lower propensity to change ratings, and thus to default, than more seasoned bonds. The aim of this paper is to introduce a continuous, time‐non‐homogeneous model for bond ratings migration, which also incorporates a simple form of population heterogeneity. The specific form of heterogeneity postulated by the proposed model appears to be suitable for modelling the effect of age of a bond on its propensity to change ratings. This model, called a mover–stayer model, is an extension of a Markov chain. This paper derives the maximum likelihood estimators for the parameters of a continuous time mover–stayer model based on a sample of independent continuously monitored histories of the process, and develops the likelihood ratio statistic for discriminating between the Markov chain and the mover–stayer model. The methods are illustrated using a sample of rating histories of young corporate issuers. For these issuers the default probabilities predicted by the Markov chain and mover–stayer models are different. In particular for 1–4 years old bonds the mover–stayer model estimates substantially lower default probabilities from rating C than a Markov chain. Copyright © 2004 John Wiley & Sons, Ltd.     

Numerical analysis of turbulent structure in compound meandering open channel by algebraic Reynolds stress model

The turbulent flow in a compound meandering channel with a rectangular cross section is one of the most complicated turbulent flows, because the flow behaviour is influenced by several kinds of forces, including centrifugal forces, pressure‐driven forces and shear stresses generated by momentum transfer between the main channel and the flood plain. Numerical analysis has been performed for the fully developed turbulent flow in a compound meandering open‐channel flow using an algebraic Reynolds stress model. The boundary‐fitted coordinate system is introduced as a method for coordinate transformation in order to set the boundary conditions along the complicated shape of the meandering open channel. The turbulence model consists of transport equations for turbulent energy and dissipation, in conjunction with an algebraic stress model based on the Reynolds stress transport equations. With reference to the pressure–strain term, we have made use of a modified pressure–strain term. The boundary condition of the fluctuating vertical velocity is set to zero not only for the free surface, but also for computational grid points next to the free surface, because experimental results have shown that the fluctuating vertical velocity approaches zero near the free surface. In order to examine the validity of the present numerical method and the turbulent model, the calculated results are compared with experimental data measured by laser Doppler anemometer. In addition, the compound meandering open channel is clarified somewhat based on the calculated results. As a result of the analysis, the present algebraic Reynolds stress model is shown to be able to reasonably predict the turbulent flow in a compound meandering open channel. Copyright © 2005 John Wiley & Sons, Ltd.     

非等间距序列建模过程中存在的问题及改进

在研究非等间距序列的基础上 ,本文将非等间距累加运用于非等间距序列的建模过程中 ,使原有模型得到改进 .实例表明 ,改进后模型的精度有了很大提高     

Transport of Neutrally Buoyant and Dense Variably Sized Colloids in a Two-Dimensional Fracture with Anisotropic Aperture

The transport of monodisperse as well as polydisperse colloid suspensions in a two-dimensional, water saturated fracture with spatially variable and anisotropic aperture is investigated with a particle tracking model. Both neutrally buoyant and dense colloid suspensions are considered. Although flow and transport in fractured subsurface formations have been studied extensively by numerous investigators, the transport of dense, polydisperse colloid suspensions in a fracture with spatially variable and anisotropic aperture has not been previously explored. Simulated snapshots and breakthrough curves of ensemble averages of several realizations of a log-normally distributed aperture field show that polydisperse colloids exhibit greater spreading than monodisperse colloids, and dense colloids show greater retardation than neutrally buoyant colloids. Moreover, it is demonstrated that aperture anisotropy oriented along the flow direction substantially increases colloid spreading; whereas, aperture anisotropy oriented transverse to the flow direction retards colloid movement.     

Absorbing boundary conditions for reaction-diffusion equations

We treat here of the question of absorbing boundary conditionsfor nonlinear diffusion equations. We use the conditions designedfor the linear equation, we prove them to be well posed forthe nonlinear problem, and through numerical experiments thatthey are well suited for reaction–diffusion equations.     

半导体激光自混频干涉式传感器中的干涉与调制

应用F-P模型，阐述了半导体激光自混频干涉式传感器的干涉与调制过程，同时给出了相应的计算．     

A posteriori error estimates for a time discrete scheme for a phase-field system of Penrose-Fife type

A time discrete scheme is used to approximate the solution toa phase field system of Penrose–Fife type with a non-conservedorder parameter. An a posteriori error estimate is presentedthat allows the estimation of the difference between continuousand semidiscrete solutions by quantities that can be calculatedfrom the approximation and given data.     

System Identification Models of the Equivalent Permittivity for Rain Medium

The dielectric constant for rain medium is investigated by utilizing the system identification method. The rain rate model and frequency model of permittivity in millimeter waves band for rain medium are presented. The results obtained with models are in very good agreement with references in calculating the attenuation of electromagnetic waves induced by rain, which Shows that the obtained models are valid and practicable. The cross-polar discrimination gotten with rain rate model is in agreement with references.