Analysis of thermal behaviour of high power semiconductor laser arrays by means of the finite element method (FEM)

New results of steady-state two-dimensional finite-element computations of temperature distributions of high power semiconductor laser arrays are presented. The influence of different thermal loads on the 2D temperature distribution in AlGaAs/GaAs gain-guided laser arrays is investigated. TheFEM model is tested by comparing it with analytical solutions. For numerical convenience, the latter is rewritten in a novel form, which is free of overflow problems. The maximum temperatures calculated by both methods agree within 1%. Several factors determining the thermal resistance of the device are quantitatively examined: the ratio of light emitting to non-emitting areas along the active zone, the amount of Joule losses, the current spreading, the solder thickness, and voids in the solder. This yields design rules for optimum thermal performance.     

Non-stoichiometry of YBa2Cu3O7-d Observed by Repeated Temperature Scanning

Repeated temperature scanning method was applied to observe non-stoichiometry of YBa₂Cu₃O₇-d, and interesting results were obtained. Two simultaneously occurring processes were separately observed in mass change; one is a fast process and the other is slow, so that their responses to the temperature change are quite different from each other. The fast process follows the cyclic temperature change, but the slow process is observed to be a gradual mass change. Kinetic behaviors of these two processes are also made clear by plotting the mass vs. the temperature. Furthermore, a hysteresis loop was observed in the plot of the mass vs. the temperature in a high temperature range presumably due to the third process, and it depends on the heating and cooling rates. This revised version was published online in July 2006 with corrections to the Cover Date.     

Dynamic headspace liquid-phase microextraction of alcohols

A method was developed using dynamic headspace liquid-phase microextraction and gas chromatography-mass spectrometry for extraction and determination of 9 alcohols from water samples. Four different solvents, hexyl acetate, n-octanol, o-xylene and n-decane were studied as extractants. The analytes were extracted using 0.8 microl of n-octanol from the headspace of a 2 ml sample solution. The effect of sampling volume, solvent volume, sample temperature, syringe plunger withdrawal rate and ionic strength of the solution on the extraction performance were studied. A semiautomated system including a variable speed stirring motor was used to ensure a uniform movement of syringe plunger through the barrel. The method provided a fairly good precision for all compounds (5.5-9.3%), except methanol (16.4%). Detection limits were found to be between 1 and 97 microg/l within an extraction time of approximately 9.5 min under GC-MS in full scan mode.     

Comparison of quantitative methods for analysis of polyphasic pharmaceuticals

Adequate very sensitive quantification methods are needed for the development and are also now required for the monitoring of undesirable solid form(s) as routine tests. The pre-requisite for quantitation are selectivity, sensitivity and most important the purity of standards and their proper storage, what is a challenge for metastable forms. Several analytical techniques are available such as X-ray diffraction, spectroscopy, thermal analysis and microcalorimetry. The different steps of the validation of the analytical methods and problems to be solved are discussed. Examples illustrate the different techniques and compare their possible advantages and limits. The relative standard deviation of measurements should allow for checking the homogenization procedure of mixtures for calibration. The validation should be carried out following ICH guidelines for validation of analytical methods. Comparison of different techniques in adequate concentration range add confidence in the analytical results.     

Relationship between the molecular structure of amino acids and dipeptides and thermal sublimation effects

This paper reports on our mass spectrometric study of sublimation of glycine and DL-alanyl-glycine (Ala-gly). The sublimation enthalpy of Ala-gly has been determined by generalization of the data obtained and the results of AM1 quantum-chemical calculations. A relationship has been found between the sublimation enthalpy (ΔH _subl), heat capacity (C _P), and the sum of bond lengths (Σn _i l _i ) in 17 α-amino acid and 9 dipeptide molecules. Correlations are suggested for evaluating ΔH _subl of amino acids and peptides.     

冠心病微量元素谱的计算机模式识别

用计算机多元分析研究冠心病微量元素谱，识别冠心病患者与健康者；非线性映射法判别率男性８６．６％，女性９６．２％；ＳＩＭＣＡ差别法正确回判率男性８５．０％，女性８８．３％。     

Thermal Analysis of Cobalt(II) Salts with some Carboxylic Acids

The thermal analysis of CoC₂O₄·2H₂O, Co(HCOO)₂·2H₂O and Co(CH₃COO)₂·4H₂O was carried out with simultaneous TG-DTG-DTA measurements under non-isothermal conditions in air and argon atmospheres. The intermediates and the end products of decomposition were characterised by X-ray diffraction and IR and UV-VIS spectroscopy. The decomposition of the studied compounds occur in several stages. The first stage of dissociation of each compound is dehydration both in air and argon. The next stages differ in air and argon. The final product of the decomposition of each compound in air is Co₃O₄. In argon it is a mixture of Co and CoO for cobalt(II) oxalate and cobalt(II) formate but CoO for cobalt(II) acetate. This revised version was published online in August 2006 with corrections to the Cover Date.     

Reaction Ergodography and Transition State Analyses of the Addition of AIH_3 to Acetylene

The present paper covers the reaction ergodography for the addition of AlH3 to acetylene investigated by ab initio calculation with RHF/3-21G basis set. The changes in some physical properties along the reaction path (IRC) are presented. The formations of FMOs of the transition state have been analyzed according to the Fukui' s method. On the basis of the perturbation theory and Wolfsborg Helmholtz formula, we calculated the FMO' s energy orders of TS and its formation that shows the HOMO of TS consists of LUMO, HOMO of AlH3 and HOMO of HCCH.     

Kinetic analysis of temperature-programmed surface reactions on porous catalysts

By means of model calculations it could be shown for an irreversible surface reaction of 1st order that the determination of the activation energy of the desorption of the reactant or, respectively, of the surface reaction is possible by application of the method of variation of the heating rate to the desorption curve of the reactant, according to circumstances whether the ratio of the activation energy of the surface reaction and of the desorption of the reactant is greater or smaller than one.The possibilities of the kinetic evaluation are applied to the isomerization of cyclopropane on a NaX-zeolite catalyst. The resulting heat of adsorption of cyclopropane and the activation energy of the reaction agree well with the values of literature obtained by isothermal measurements in a pulse reactor.

---

Zusammenfassung Mit Modellrechnungen für eine irreversible Oberflächenreaktion 1. Ordnung konnte gezeigt werden, daß durch Anwendung der Methode der Variation der Heizgeschwindigkeit auf die Desorptionskurve des Ausgangsstoffes die näherungsweise Bestimmung der Aktivierungsenergie der Desorption des Ausgangsstoffes bzw. der Oberflächenreaktion möglich ist, je nachdem ob das Verhältnis der Aktivierungsenergien für die Oberflächenreaktion und der Desorption des Ausgangsstoffes größer oder kleiner als eins ist.Die Möglichkeiten der kinetischen Auswertung werden auf die isomerisierung von Cyclopropan an einem NaX-Zeoliten angewendet. Die erhaltene Adsorptionswärme für Cyclopropan und die Aktivierungsenergie für die Reaktion stimmen gut mit Literatur-werten von isothermen Messungen im Impulsreaktor überein.