Synthesis of Substituted 6-Amino-4-aryl-5-cyano-2H,4H-pyrano[2,3-c]pyrazoles. Crystal and Molecular Structure of 6-Amino-5-cyano-3-methyl-4-(2',4',6'-triethylphenyl)-2H,4H-pyrano[2,3-c]pyrazole

Substituted 6-aminopyrano[2,3-c]pyrazoles were synthesized by the two-component condensation of arylidenemalononitriles and substituted 5-pyrazolones or three-component condensation of aromatic aldehydes, malononitrile, and substituted 5-pyrazolones. It was established by X-ray crystallographic analysis that pyranopyrazoles exist in the 2H and not the 1H tautomeric form.     

Thermoanalytical investigation of layered titanium salts

The investigated materials have similar routes of thermal decomposition; i.e. they lose their crystal water first, then at a higher temperature their structural one. At least the result TiP₂O₇ goes through a phase change at about 1000 K. The amorphous titanium phosphate lost its crystal and structural water at higher temperature than those of crystalline forms. Both α- and γ-titanium phosphates and also their transition metal containing forms have layered structure. In case of α- and γ-forms after the loss of crystal water a phase change occurs which is followed by the decomposition of the molecule. Various transition metals containing γ-titanium phosphates lose their crystal water at the same temperature, with the exception of Ni containing ones. The process is finished in this case at temperature 90 K higher than that of the others. This revised version was published online in July 2006 with corrections to the Cover Date.     

Comparison of procedures for correction of matrix interferences in the multi-element analysis of soils by ICP-AES with a CCD detection system

Three procedures, matrix matching, plasma optimisation and single-point standard-addition, have been evaluated to ascertain the best procedure for simultaneous multi-element analysis of industrial soils by ICP-AES with CCD detection. A standard reference material, CRM143 from the Bureau Communautaire de Réference (BCR), has been analysed for Cd, Cr, Cu, Mn, Ni and Pb using the three different matrix interference correction procedures. All three procedures give comparable results which are in good agreement with the BCR values, except for Cr. The single-point standard addition procedure was chosen, on the basis of economy and ease of implementation, to correct for matrix interferences in the determination of Cd, Co, Cr, Cu, Mn, Mo, Ni, Pb, Sn and V in soil samples collected from an industrial site in England. Concentrations of some of the elements were found to vary greatly with sampling depth. For example, the concentration of Mn, determined using the atomic line at 279.920 nm, increased from 426 ± 3 g/g at a depth of 18–28 cm to 5996 ± 144 g/g at 60–85 cm.     

Vibrational assignment, <Emphasis Type="Italic">ab initio</Emphasis> calculation and normal coordinate analysis of 2,2′-biquinoline

The vibrational wavenumbers and the fundamental modes of 2,2′-biquinoline were obtained by density functional theory (DFT) with the B3LYP functional using the 6-31G(d,p) basis set. The calculated wavenumbers were scaled by a single factor of 0.965 to correct them for vibrational anharmonicity, but the force constants were overestimated. Normal coordinate analysis of the molecule was also carried out by using the force field of the quinoline molecule and the force field parameters of quinoline are shown to be transferable to 2,2′-biquinoline. The potential energy distribution associated with the normal modes is also given. The theoretical wavenumbers are found to be in good agreement with the experimental data.     

As(Ⅲ)-Cu(Ⅱ)协同抑制鲁米诺-MnO_4~-化学发光反应的研究及其应用

本文报道了As(Ⅲ)-Cu(Ⅲ)两种离子对鲁米诺-MnO_4~-化学发光反应的协同抑制作用,据此拟定了测定微量As(Ⅲ)的化学发光新方法。该法灵敏度较高,检测限为6.8×10~(-9)g/ml As(Ⅲ),选择性也较好,同时线性范围宽(7.0×10~(-9)～3.0×10~(-6)g/ml),测定手续简便。应用本法测定工业废水中的As(Ⅲ),结果满意。     

VA族元素对阳极铅(Ⅱ)氧化物膜半导体性质的影响(Ⅱ)

用光电化学电流法研究了铅、铅砷、铅锑和铅铋合金在4．5mol·L－1H2SO4溶液（22℃）中，以0．9V（vs．Hg／Hg2SO4）极化7h而形成的阳极膜中的氧化铅的半导体性质，合金添加剂砷、锑和铋对t－PbO（四方氧化铝）和o-PbO（斜方氧化铝）的禁带宽度没有影响，从量子效率和电位的关系可求Pb，Pb－lat％As（at％表示原子百分比，全文同），Pb-lat％Sb和Sb－lat％Bi上膜中t－Pbo的施主密度（ND）分别为9．3×1015，1．0×1016，3．1×1016和1．3×1017cm-3，平带位分别为-0．20，－0．22，－0．28和-0．08V（vs．Hg／Hg2SO4）．比较VA元素砷、锑和铋对上述膜中t－Pbo的ND（从而自由电子密度）和膜中t－Pbo的生长速率的影响，可认为法添加剂砷、锑和铋对阳极膜中t-Pbo的作用符合Hauffe规则．     

因子分析—伏安法同时测定波峰重叠的混合物组份

本文将目标因子分析用于伏安分析法同时测定波峰重叠的混合物组份。用此法对Ｐｂ（Ⅱ）、Ｔｌ（Ｉ）混合体系的导数脉冲伏安重叠峰数据进行解析，获得了较理想的结果。     

立方介孔相含钇氧化硅的合成与表征

以低浓度的十六烷基三甲基溴化铵为结构导向剂,在碱性条件下通过水热法合成了具有立方结构的含钇Y MCM 48介孔分子筛材料。XRD测试表明当Y/Si<0.05时可以获得典型的长程有序介孔立方结构相,随Y/Si比的增加,晶胞参数的增大和红外吸收光谱(FTIR)的变化为Y进入介孔分子筛骨架中提供了有力证据。N2吸附-脱附实验给出这种立方介孔材料的BET表面积为1180m2·g-1,BJH平均孔径为3.4nm。紫外 可见漫反射光谱(UV vis)证明钇以一种六配位的形式存在。X射线光电子能谱(XPS)进一步证明钇以三价形式存在于立方介孔分子筛骨架中。     

不同方法掺杂Au对纳米α-Fe2O3气敏性能的影响

分别采用共沉淀法、浸渍法、紫外辐照法制备了掺杂不同Au含量的α-Fe2O3纳米粉体,并制作了旁热式厚膜型气敏元件.用XRD、TG-DTA和TEM技术对纳米晶的晶型、晶粒大小及形貌进行了表征.考察了掺杂方法、Au含量及焙烧温度对α-Fe2O3气敏性能的影响.结果表明,采用三种方法掺杂适量Au后,都使α-Fe2O3的气敏性有了显著提高,其中采用共沉淀法,在400℃焙烧的Au质量分数为1.5%的α-Fe2O3的气敏性最佳.     

TCDD的密度泛函理论研究

用B3LYP/6-311G~(**)方法全优经计算22个四氯二苯并对二（左口右恶）英（ 简称TCDD）分子，得到几何构型、总能量、标准熵、标准焓和标准自由能。将2， 3，7，8－TCDD的计算构型与X射线衍射实验测定值进行了比较。计算结果表明，总 能量、标准焓和标准自由能与氯原子量换位置的相关性很高（r > 0.997）.1,3,6, 8-TCDD的总能量处自由能最低，即最稳定，以此参照，得到异构体的总能量的相对 稳定性顺序和自由能的相对稳定性顺序。1,3,7,9－TCDD的稳定性次之，1,3,7,8- TCDD居第三，将这二个顺序与焚烧炉产生的TCDD异构体和合成的异构体对的生成面 分比进行了比较，说明焚烧炉中产生的TCDD和合成的TCDD对的分布主要受热力学控 制。