一种改进的谐振参数扰动法及其在DC/DC变换器混沌控制中的应用

种改进的谐振参数扰动法来控制混沌，该混沌控制方法引入了基于非线性映射的调制，其控制目标可以是任意周期的轨道，而不是原混沌吸引子中的嵌入轨道。作为一个应用实例，文中描述了该方法在电流模式控制dc/dc变换器中的应用结果。     

A numerical bifurcation study of friction effects in a slip-controlled torque converter clutch

Friction plays a key role in the efficiency and stability of the slip-controlled torque converter clutches. The effects of friction on the dynamics and stability of a slip-controlled torque converter clutch system using a bifurcation-analysis-based approach is presented in this paper. A three degree-of-freedom nonlinear driveline model with integral feedback action to control the clutch slip speed has been utilized for this study. The clutch interface friction is dependent on the slip speed and is a function of the static friction constant, μ ₀, the low velocity friction constant μ ₁, and the low velocity exponential rate, γ. Using one-parameter numerical continuation, local Hopf bifurcations of the subcritical type are observed as the friction parameters μ ₁ and γ were varied at low slip speeds. The continuation results are verified using simulations of the full nonlinear model. Stick-slip and undesirable oscillations of the model inertia elements are observed for certain parameter values. As the slip speed is increased, the bifurcation instability occurs at an increasingly higher value of μ ₁ signifying an improved tolerance of negative friction gradient at higher slip speeds. Smaller exponential rates γ are tolerated at higher slip speeds before the bifurcation instability occurs. For the range of parameter values considered, no bifurcations occur for a slip speeds higher than 3.4 and 4.5 rad/s with μ ₁ and γ as the continuation parameters, respectively. These values of slip speeds are much lower than the system’s first mode of torsional vibration of 16 Hz (≈100 rad/s).     

MOSFET with a boron-loaded gate as a low-energy neutron dosimeter

A MOSFET-based low-energy neutron dosimeter has been fabricated using a ¹⁰B loaded gate electrode as (n,α) converter. The response to thermal neutrons has been studied.     

过模波导器件的迭代设计方法

从模式保留和转换的角度, 过模波导器件可分为模式转换器、模式保留器和模式综合器. 传统方法只解决其中一种器件的设计或者对器件的某个指标进行改进. 本文在深入分析耦合波理论之后, 提出了过模波导器件的迭代设计方法, 从原理上解决了过模波导器件的设计问题. 该方法能够统一设计三类过模波导器件, 通过添加不同的结构控制方法, 可得到转换效率更高、带宽更宽、结构更紧凑、满足不同工程需求的器件, 而且还能有效设计一些新型器件. 给出了两个设计实例: 双频TM₀₁–TE₁₁模式变换器和光壁馈源喇叭. 双频TM₀₁–TE₁₁模式变换器的两个工作频点为8.75 GHz和10.3 GHz, 波导半径为16 mm, 在两个频点转换效率为99%以上. 光壁馈源喇叭实现TE₁₁模式向高斯束的转换. CST仿真结果验证了这两个器件设计的正确性和有效性. 关键词： 耦合波理论 模式转换器 模式过渡器 迭代法     

应用微机数模转换接口控制小直流电机的转速

介绍了采用微机数模转换器接口技术实现对小直流电机转速控制的实验方案，并对实验结果进行了讨论．     

D/A Converters and Iterated Function Systems

This paper discusses A/D and D/A converters as applications of iterated function systems. We describe operation of basic converters in terms of iterate function systems and introduce typical examples for binary and Gray encodings/decodings. We then comment that converters in the field of analog signal processing have different character from iterated function systems in the field of nonlinear dynamical systems. Simple implementation circuits for the binary and Gray D/A converters are also shown.     

内增强变象管相机中的干扰研究

本文讨论了带快门的内增强变象管相机的快门电路及其对扫描电路的干扰,干扰信号对相机性能指标的影响及解决方法。     

Fabrication of Spot Size Converters for Optical Chemical Sensors by Distributed-Field-Assisted Ion-Exchange

We propose a new method for fabricating optical waveguides with nonuniform thickness by controlling the electrical field distribution during the field-assisted ion-exchange. We refer to this method as distributed-fild-assisted ion-exchange. The distribution of the intensity of the electrical field was simulated for different electrode configurations, and was compared with experimental diffusion depth distribution of K⁺—Na⁺ exchange in sodalime slide glass. A unique bath was designed for the distributed-field-assisted ion-exchange. Using a three-electrode configuration, we obtained, for instance, a 2 cm-long spot size converter with thickness changes of from 12 μm to 2 μm. This technique can be used to fabricate waveguides for optical chemical sensors.On leave from State Key Laboratory of Transducer Technology, Institute of Electronics, Chinese Academy of Sciences, Beijing, China 100080.     

真空紫外/可见光纳秒条纹相机的研制

ZNT-500K真空紫外/可见光纳秒条纹相机已研制成功,在研制过程中,研制了新型变象管,较好地解决了MgF²晶体和科伐材料的高真空封接,合理地确定了导电基底的材料和厚度,使光谱响应和透过率都满足要求;合理地确定扫描电路和电路参数,使该相机具有了光谱响应范围宽和扫描时间范围宽两大特点。     

斜坡补偿电流模式控制开关变换器的动力学建模与分析

降压型、升压型和升压-降压型DC-DC变换器是应用广泛的基本开关DC-DC变换器.电流模式控制开关DC-DC变换器在较宽的电路参数范围内具有两个边界,基于开关切换前后电感电流的上升和下降斜率,建立了斜坡补偿电流模式控制开关DC-DC变换器的统一模型.该模型进行无量纲归一化处理后只有三个参数,可有效展示开关DC-DC变换器在电感电流连续传导模式(CCM)和电感电流不连续传导模式(DCM)时的动力学特性.利用此模型,导出了轨道状态发生转移时的两个分界线方程,由此确定了开关DC-DC变换器的稳定周期1域、CCM鲁棒混沌域和DCM弱混沌强阵发域三个工作状态区域.开关DC-DC变换器二维参数映射图和电流模式控制降压型DC-DC变换器的电路实验观察验证了由两条分界线划分工作状态域的正确性.