Transient DSC,a Novel and Rapid Method for Assessing Pharmaceutical Powder Compacts

The previously described method involving the use of transient DSC was applied to pharmaceutical powder compacts and to ceramic powder compacts. The samples were prepared by compressing powders of pentaerythritol tetraacetate and two kinds of alumina powder (differing in particle size distribution) up to a pressure of 20 MPa by using a jig. For pentaerythritol tetraacetate, a linear relationship was obtained between the parameter obtained by DSC and the compaction pressure. This revised version was published online in August 2006 with corrections to the Cover Date.     

CuI-catalyzed Coupling Reactions of Aryl Iodides with Amides Using L-Proline and KF/Al2O3

An efficient experimentally simple and inexpensive catalyst system for the selective amidation of aryl iodides using 15 mol% of CuI as catalyst, 15 mol% of L-proline as ligand and KF/Al2O3 as a base in toluene is described.     

Nanoporous membrane-based cell chip for the study of anti-cancer drug effect of retinoic acid with impedance spectroscopy

This paper presents a novel microchip with nanoporous anodic alumina membrane for the study of anti-cancer drug effect of retinoic acid (RA) on human esophageal squamous epithelial KYSE30 cancer cells in vitro with impedance spectroscopy. The impedance experiments with 0.01 M retinoic acid (RA) were explored for the study of anti-cancer drug effects on KYSE30 cancer cells. The impedance was monitored in the time domain at 0.1 Hz. After addition of 0.01 M RA to the cell chip, the impedance magnitude decreased with time from the value with confluent cell layer and returned to the initial base line after around 12 h. The fluorescence experiments testified that this impedance decrease was due to the cell morphology change induced by RA.     

含有序孔洞的多孔氧化铝薄膜的弹性模量测量

高纯铝箔在特定的溶液下经过电化学阳极氧化腐蚀，可在其表面生成一层多孔的非晶氧化铝层，孔大致呈六方密排，孔径分布均匀。此类薄膜具有规则的纳米级孔径，大的比表面积，可用在微纳滤方面和纳米材料组装方面。然而，对于此类薄膜力学性能的研究较少，在一定程度上限制其功能的开发和应用。为了获得此类多孔膜的弹性常数，本文用鼓膜法结合散斑干涉实验方法、单轴拉伸结合双光束干涉法和多普勒测振仪三种方法测量氧化铝多孔膜的弹性模量，得到的宏观弹性模量基本相同，并对三种方法的优缺点进行了比较，分析了多孔氧化铝膜与块状氧化铝材料或致密氧化铝膜力学性能的差并。     

Adsorption of block copolymers in nanoporous alumina

We have studied the adsorption of end-attaching block copolymer chains inside the cylindrical pores of nanoporous alumina. Highly asymmetric PS-PEO block copolymers, with a small PEO anchoring block and a long PS dangling block, were allowed to adsorb onto porous alumina substrates with an average pore diameter of ∼200 nm from toluene solution. The adsorption process was monitored using FTIR spectroscopy, whereas depth profile analysis was performed by means of XPS and Ar⁺ ion sputtering. It is found that the PS-PEO adsorption kinetics in porous alumina are ∼4 orders of magnitude slower than the corresponding case of a flat alumina substrate. It appears that chains adsorbed near the pore entrance early on tend to form a barrier for chains entering the pore at later times, thereby slowing down the adsorption process significantly. This effect is much more pronounced for large chains whose dimensions are comparable with the pore diameter. The equilibrium adsorbance value is also affected by chain size due to the additional entropic penalty associated with chain confinement, the adsorbance falling substantially when the chain dimensions become comparable with the pore diameter. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1676–1682, 2010     

Experimental and ab initio infrared study of χ-, κ‐ and α-aluminas formed from gibbsite

χ-, κ- and α-alumina phases formed by dehydration of micro-grained gibbsite between 773 and 1573 K are studied using infrared spectroscopy (IR). The structural transitions evidenced by X-ray diffraction (XRD) were interpreted by comparing IR measurements with ab initio simulations (except for the χ form whose complexity does not allow a reliable simulation). For each phase, IR spectrum presents specific bands corresponding to transverse optical (TO) modes of Al-O stretching and bending under 900 cm⁻¹. The very complex χ phase, obtained at 773 K, provides a distinctive XRD pattern in contrast with the IR absorbance appearing as a broad structure extending between 200 and 900 cm⁻¹ resembling the equivalent spectra for γ-alumina phase. κ-alumina is forming at 1173 K and its rich IR spectrum is in good qualitative agreement with ab initio simulations. This complexity reflects the large number of atoms in the κ-alumina unit cell and the wide range of internuclear distances as well as the various coordinances of both Al and O atoms. Ab initio simulations suggest that this form of transition alumina demonstrates a strong departure from the simple pattern observed for other transition alumina. At 1573 K, the stable α-Αl₂Ο₃ develops. Its IR spectra extends in a narrower energy range as compared to transition alumina and presents characteristics features similar to model α-Αl₂Ο₃⋅ Ab initio calculations show again a very good general agreement with the observed IR spectra for this phase. In addition, for both κ- and α-Αl₂Ο₃, extra modes, measured at high energy (above 790 cm⁻¹ for κ and above 650 cm⁻¹ for α), can originate from either remnant χ-alumina or from surface modes.     

环氧化蓖麻油的合成及表征

采用酸性氧化铝做催化剂对蓖麻油(CO)进行环氧化,探索环氧化反应时间、反应温度和催化剂等不同条件对蓖麻油环氧化的影响,从而优化出合适的反应条件,采用傅立叶变换红外光谱法(FTIR)、热重分析法(TG)对制备的环氧化蓖麻油(ECO)的结构和性质等进行了研究。利用盐酸-丙酮法对环氧化产物进行环氧值的测定,结果表明,在优化条件下,即采用酸性氧化铝做催化剂,H₂O₂的滴加温度保持在50～55 ℃,反应温度65 ℃,反应时间控制在11.5 h,同时同时加入尿素做稳定剂,可以提高H₂O₂的利用率,使环氧化蓖麻油的环氧值达到2.094×10_-3 mol/g。 对ECO的性能表征结果表明,ECO粘度随着环氧值的增大而增大,随着温度的升高而降低。 ECO在250 ℃前能够基本保持稳定,而后开始分解,有3个明显的热分解阶段：250~390 ℃、390~470 ℃、470~580 ℃,ECO的热稳定性较好。     

固体多核 NMR 研究 Mo/Hβ-Al2O3 催化剂在烯烃歧化反应中的积炭

 采用固体多核 13C, 27Al 及 29Si MAS NMR 结合吸附气体 Xe 后的 129Xe NMR, 详细研究了乙烯和 2-丁烯歧化生成丙烯反应过程中 6%Mo/Hβ-Al2O3 催化剂上积炭的类型和落位. 结果表明, 积炭以饱和烷烃为主, 并随着反应的进行生成更多的支链烷烃, 积炭主要分布在 Hβ 分子筛上, 并主要落位在分子筛的交叉孔道处.     

介孔氧化铝负载钒催化剂上丙烷氧化脱氢制丙烯

 采用浸渍法制备了介孔氧化铝 (m-Al2O3) 负载钒催化剂 (V/m-Al2O3), 并考察了其催化丙烷氧化脱氢制丙烯反应活性. 通过 N2 吸附-脱附、透射电镜、X 射线粉末衍射、紫外-可见漫反射光谱、氢-程序升温还原和氨-程序升温脱附对催化剂进行了表征. 结果表明, 介孔氧化铝具有大比表面积、窄孔径分布和两维六方相结构, 在其上负载适量的 V 可实现 V 活性物种的高分散及催化剂的弱酸性, 从而有利于提高丙烷转化率和丙烯选择性. 与共合成法制备的含 V 介孔氧化铝 V/m-Al2O3(C) 和浸渍法制备的 V/?-Al2O3 相比, V/m-Al2O3 表现出更高的催化活性. 这与载体较弱的酸性和较大的比表面积以及 V 物种的高分散有关.     

Ultrasound-assisted anodization of aluminum in oxalic acid

Porous anodic alumina is an important nanoscale template for fabrication of various nanostructures. We report a new ultrasound-assisted anodization process in oxalic acid. Under the continuous irradiation of ultrasound, the one-step-anodized sample has a smooth and clean surface, and two-step-anodization brings ordered porous anodic alumina with higher growth rate of 52 μm/h. The ultrasound applied during the anodization can clean the surface and enhance the nanopore growth since it can accelerate the oxide dissolving on the electrolyte/oxide interface. The ultrasound-assisted anodization may be utilized for other anodizations.