在群论框架下电子三重态与声子耦合的理论研究

本文基于绝热近似和群论导出了电声耦合系统的哈密顿量的一般形式,讨论了电声耦合系统中的电子算符和活跃的声子模式. 应用幺正平移变换和能量最小化方法,进一步计算了正四面体群下T*(e+t₂)杨-泰勒系统中的激发态能量,从对称性的角度分析了T₁电子态的能级分裂以及晶格体系的对称性破缺,得出了对称性的破缺方式和电声耦合系统密切相关的结论. 结果表明:通过群论与对称性分析完全可以定性地解释由于电声耦合所造成的简并电子 关键词： 电声耦合 杨-泰勒畸变 活跃的杨-泰勒声子模式 电声耦合哈密顿量     

多功能磁光子晶体太赫兹可调偏振控制器件

通过对磁场控制下的二维磁光子晶体太赫兹波偏振传输特性的研究,利用铁氧体磁光材料的磁导率随外磁场改变而变化的特点,设计了具有可控起偏、偏振分束和可调谐波片功能的光子晶体太赫兹偏振控制器件.利用平面波展开法和严格耦合波分析分别计算了光子晶体带隙位置和透过率随外磁场强度变化的关系,用时域有限差分法计算了场分布和相位.结果表明,该结构可以实现高偏振消光比的偏振起偏器和分束器,以及在1 THz附近-π-π相位范围的连续可调谐波片. 关键词： 太赫兹 光子晶体 铁氧体 偏振控制     

Digital flow control of electroosmotic pump: Onsager coefficients and interfacial parameters determination

Electroosmosis and streaming potential are two complementary electrokinetic processes related by the Onsager relation. In particular, an electroosmotic pump (EOP) is potentially useful for a variety of engineering and bio-related applications. By fabricating samples consisting of dry-etched cylindrical pores (50 μm in length and 3.5 μm in diameter) on silicon wafers, we demonstrate that the use of digital control via voltage pulses can resolve the flow regulation and stability issues associated with the EOP, so that the intrinsic characteristics of the porous sample medium may be revealed. Through the consistency of the measured electroosmosis (EO) and the streaming potential (SP) coefficients as required by the Onsager relation, we deduce the zeta potential and the surface conductivity, both physical parameters pertaining to the liquid-solid interface.     

Control of mixed protonic and electronic conductivity by mixing rare-earth ortho-borates

In order to develop mixed protonic and electronic conductors, we proposed a novel concept for material design that enables to control partial conductivities by fabricating solid solutions of protonic and electronic conductors. In this work, Sr-doped LaBO₃ and Sr-doped CeBO₃ were chosen as model compounds conducting protons and electron holes, respectively. Solid solutions of the above borates, Sr-doped La_1 − xCe_xBO₃, were prepared, and their electrical conductivities were investigated in 8.5 × 10²-4.2 × 10³ Pa of p(H₂O) and 1.0 × 10-1.0 × 10⁵ Pa of p(H₂) at 1073 K. From the experimental results of the gas partial pressure dependences of the conductivities, major charge carrier species were identified as a function of x. It was found that proton was the major charge carrier when x < 0.2 while the contribution of the electron hole conduction became remarkable as x increased above 0.2. The contribution of the electron hole conduction can be interpreted by the percolation model.     

Maximizing critical currents in superconductors by optimization of normal inclusion properties

The movement of vortices in superconductors due to an applied current can induce a loss of perfect conductivity. Experimental observations show that material impurities can effectively prevent vortices from moving. In this paper, we provide numerical studies to investigate vortex pinning and critical currents through the use of an optimal control approach applied to a variant of the time-dependent Ginzburg-Landau model that can account for normal inclusions. The effects that the size and boundary of the sample and the number, size, shape, orientation, and location of the inclusion sites have on the critical current and vortex lattices are studied. In particular, the optimal control approach is used to determine the optimal properties of the impurities so as to maximize the critical current, i.e., the largest current that can pass through a superconductor without resistance.     

Excimer laser accelerated hydrothermal synthesis of ZnO nanocrystals & their electrical properties

The synthesis of ZnO nanocrystals is reported using a hydrothermal chemical growth technique combined with 248 nm nanosecond excimer laser heating at fluences in the range 0-390 mJ cm⁻². The effect of laser heating in controlling the morphology of the nanocrystals is investigated using optical spectroscopy and electron microscopy characterization. Laser heating is shown to allow control of the crystal morphology from nanoparticles to nanorods as well as to modify the size distributions. The results indicate that not only does the laser accelerate the growth of nanocrystals, but can also produce crystals with a narrow size distribution possibly via photothermal size selection. An initial study of electrical conduction properties of ZnO nanocrystal thin films is also discussed.     

黎开管热声振荡的主动控制研究

本文以黎开管内的热声耦合振荡为研究对象,设计基于主动补偿的适应性控制器抑制黎开管内的不稳定燃烧。试验以扬声器为执行机构来改变黎开管的边界条件,从而抑制黎开管内的热声耦合振荡。实时控制效果表明,本文所采用的适应性控制算法能够有效抑制因热声耦合产生的燃烧振荡,为实际动力系统燃烧振荡抑制提供了思路。     

阿尔法磁谱仪配电系统的热控系统设计及实验研究

本文以阿尔法磁谱仪中的配电系统为研究对象,阐述了利用热管解决配电系统局部温度过高的热控问题。通过数值模拟,采用体点散热问题的仿生优化方法,获得了高导热性的热管在母板中的人工构造,构建了一种有效的热控系统。数值模拟和实验结果对比验证了数值模拟模型的可靠性和仿生优化方法的可行性,也说明了热管在均温和传热方面的优良作用。     

大视场星敏感器标定技术研究

大视场星敏感器光学系统,由于畸变量较大,在轨标定过程中,直接采用最小二乘最优估计(LMS)或扩展卡尔曼滤波方法(EKF)无法精确求解其标定参数。在深入分析星敏感器测量误差因素的基础上,对考虑畸变和不考虑畸变两种情况的在轨标定结果进行了仿真对比;指出了标定焦距之前需先标定光学畸变的必要性,并介绍了4种可用于在轨校正光学畸变的方法;提出先标定主点偏差,再标定光学畸变参数,最后标定焦距的标定方法。仿真结果表明,可以采用像面旋转法求取主点偏差,利用高阶多项式方法求取光学畸变参数,畸变校正后,采用LMS和EKF标定算法估计焦距,标定精度达到了3.1μm和2.2μm。对100幅模拟星图处理后,星间角距统计偏差约为传统在轨标定方法的1/10～1/8。     

自耦合射流强化掺混的数值研究

针对同向两股气流掺混的某一特定物理模型,对自耦合射流作用下的气流掺混过程进行了数值模拟研究.与未施加自耦合射流激励的掺混过程相比,自耦合射流周期性的吹/吸诱导流场内产生复杂的大尺度涡系结构,使得同向两股气流形成对流型混合,有效缩减了主流核心区长度;相对于在燃烧室单侧放置激励器的方式,双侧自耦合射流激励时温度均匀分布线较...