Spectroscopy of the regenerative soot

The mechanisms and processes of the formation of the regenerative soot in a graphite hollow cathode discharge that produces and emits carbon clusters are presented. Mass spectrometry with a specially designed E×B velocity filter analyzes the entire range of the charged clusters from C ₁ to ∼C ₄₃₀₀. The state of the carbon vapour within the source is evaluated by using the characteristic line emissions from the carbonaceous discharge whose formative mechanisms depend upon the kinetic and potential sputtering of the sooted cathode. The carbonaceous discharge generates atomic and ionic C and its clusters C _m (m≥ 2), noble gas metastable atoms and ions, energetic electrons and photons in the cavity of the graphite hollow cathode. The parameters of soot formation and its recycling depend critically on the discharge parameters, the geometry of the hollow cathode and 3D profile of the cusp magnetic field contours. Received 2nd July 2001 and Received in final form 10 September 2001     

Physical Analysis of a Possibility to Reach the 1.30-μm Emission from the GaAs-Based VCSELs with the InGaAs/GaAs Quantum-Well Active Regions and the Intentionally Detuned Optical Cavities

Physical aspects of an operation of the GaAs-based InGaAs/GaAs quantum-well (QW) VCSELs with the intentionally detuned optical cavities have been considered in the present paper using the comprehensive three-dimensional self-consistent optical–electrical–thermal-gain simulation. In GaAs-based structures, very good DBR resonator mirrors and a very efficient methods to confine radially both the current spreading and the electromagnetic field with the aid of oxide apertures may be applied. It has been found using the above simulation that even currently available immature technology enables manufacturing the above devices emitting radiation of wavelengths over 1.20 μm. In particular, while the room-temperature 1.30-μm lasing emission is still beyond possibilities of the InGaAs/GaAs QW VCSELs, these structures may offer analogous 1.25-μm emission, especially for the high-power and/or high-temperature operation.     

Effects of UV photon irradiation on SiOx (0 < x < 2) structural properties

Thin films of a-SiO_x (0 < x < 2) were prepared by reactive r.f. magnetron sputtering from a polycrystalline-silicon target in an Ar/O₂ gas mixture. The oxygen partial pressure in the deposition chamber was varied so as to obtain films with different values of x. The plasma was monitored, during depositions, by optical emission spectroscopy (OES) system. Energy dispersive X-ray (EDX) measurements and infra-red (IR) spectroscopy were used to study the compositional and structural properties of the deposited layers.Structural modifications of SiO_x thin films have been induced by UV photons’ bombardment (wavelength of 248 nm) using a pulsed laser. IR spectroscopy and X-ray photoemission spectroscopy (XPS) were used to investigate the structural changes as a function of x value and incident energy. SiO_x phase separation by spinodal decomposition was revealed. The IR peak position shifted towards high wavenumber values when the laser energy is increased. Values corresponding to the SiO₂ material (only Si⁴⁺) have been found for laser irradiated samples, independently on the original x value. The phase separation process has a threshold energy that is in agreement with theoretical values calculated for the dissociation energy of the investigated material.For high values of the laser energy, crystalline silicon embedded in oxygen-rich silicon oxide was revealed by Raman spectroscopy.     

Pattern时延差编码四信道水声通信技术研究

本文所研究的是基于Pattern时延差编码（PDS）体制下的水声通信技术.PDS水声编码体制利用Pattern码片出现在码元窗的时延差值进行时延编码,通过码元分割,有效的降低了水声信道的多途干扰;通过频率分割划分四个通信信道,增加通信速率至1000bit/s.在接收端利用带通滤波器来实现通信信道分割,每个信道再应用拷贝相关器实现码元分割并估计出时延差值,完成译码.仿真实验表明,该系统适合于大量不同水声信道高可靠性工作,为水声通信网络化打下坚实基础.     

Fermi能区核－核碰撞的平衡前中子发射

利用ＢＵＵ模型模拟核－核碰撞３６Ａｒ＋１０８Ａｇ（３５Ｍｅｖ／ｕ）、１４Ｎ＋１０８Ａｇ（３５ＭｅＶ／ｕ）中的平衡前中子发射．模拟结果与唯象的运动源拟合给出的中等速度源成份相吻合．这说明中等速度源成份产生于核－核碰撞的早期，对应平衡前发射．并从级联碰撞的角度定量地研究了平衡前发射的持续时间     

Response of line focus acoustic microscope to specimen containing a subsurface crack

A numerical model is presented to calculate V(z) and V(x, z) curves for a line focus acoustic microscope and a specimen containing a subsurface crack. In this model, a Gaussian beam which is tracked through the lens into the coupling fluid and into the specimen, interacts with the crack. The numerical approach is based on the solution of singular integral equations by the boundary element method. The system of singular integral equations follows from the conditions at the interface of the coupling fluid and the specimen and on the faces of the crack. An electromechanical reciprocity relation is used to express the voltage at the terminals of the microscope's transducer in terms of the calculated incident and back-scattered fields. V(z) and V(x, z) curves are presented for various locations and orientations of the crack. The characteristic features of the V(z) and particularly the V(x, z) curves, as they relate to crack configuration, are discussed in some detail.     

An estimation of the measurement uncertainty for an optical emission spectrometric method

 A validation procedure based on the ISO/IEC 17025 standard was used to demonstrate the long-term stability of a calibration process and to assess the measurement uncertainty of a standard test method for optical emission vacuum spectrometric analysis of carbon and low-alloy steel (ASTM E 415–99a). The validation was used to provide documented evidence that the selected method fulfils the requirements and that the method is ”fit for purpose”. A test for drift was applied to determine statistically whether the analytical results vary systematically with time. The accuracy and traceability of the optimised method were tested by an analysis of closely matched matrix certified reference materials (CRMs). The measurement uncertainty estimations took account of the precision study, the bias and its uncertainty, and the qualification of uncertainties not considered in the overall performance studies. Received: 2 November 2002 Accepted: 2 January 2003 Acknowledgement The author expresses gratitude to Dr. Aleš Fajgelj for helpful discussions during the 3rd Central European Conference on Reference Materials and Measurements. Presented at CERMM-3, Central European Reference Materials and Measurements Conference: The function of reference materials in the measurement process, May 30–June 1, 2002, Rogaška Slatina, Slovenia Correspondence to T. Drglin     

Geodesic Acoustic Mode in Toroidally Axisymmetric Plasmas with Non-Circular Cross Sections

The geodesic acoustic mode （GAM）, first predicted by Winsor, Johnson and Dawson in an attempt to explain some experimentally observed low frequency oscillations in stellarators, is a special electrostatic fluid mode with low mode number and coupled with the so-called geodesic curvature of a toroidally confined plasma. The recent on this mode are due to the close relevance of the stabi- lization of drift turbulence by both the zonal flow and the GAM. Previously, the GAM was illustrated in very simple geometries,     

Structure and optical properties of lead iodide based two-dimensional perovskite compounds containing fluorophenethylamines

Phenethylammonium-based perovskites, which can be regarded as a semiconductor/insulator multiple quantum well consisting of lead halide semiconductor layers sandwiched between phenethylammonium insulator layers were prepared. To investigate the effects of the electronic state and the orientation of organic insulator layers on the optical properties of layered perovskites, fluorine substituted analogues were also prepared. The structure and optical properties were investigated by the XRD, UV–Vis absorption, and fluorescence measurements. The exciton absorption peak was shifted by the substitution of fluorine atoms in organic ammonium compounds. It became clear that the optical properties of two-dimensional perovskite compounds were controlled by the substitution of fluorine atoms.     

Integral Method o Reciprocity in the Spectroscopy of Laser Crystals with Impurity Centers

A new method of determining the stimulated emission cross-section spectra from the absorption cross-section spectra, which we call the integral method of reciprocity, is suggested it does not require knowledge of the structure of the impurity-center electron levels. Based on this method, formulas for calculating the radiation lifetime of impurity centers in crystals have been derived. The effectiveness of the integral method of reciprocity was demonstrated in determining the stimulated emission cross sections and radiation lifetime of an ytterbium ion in the laser crystals Yb³⁺:KYW and Yb³⁺:KGW.