多元方法研究单摆运动特性

根据霍尔效应原理,利用单片机技术实现了对单摆运动周期和重力加速度的实时测量,并使用photoshop,excel,matlab,tracker等软件对实验数据进行处理和分析。     

Characterization of Cr‐doped Sb2Te3 films and their application to phase‐change memory

Phase‐change memory (PCM) is regarded as one of the most promising candidates for the next‐generation nonvolatile memory. Its storage medium, phase‐change material, has attracted continuous exploration. Along the traditional GeTe–Sb₂Te₃ tie line, the binary compound Sb₂Te₃ is a high‐speed phase‐change material matrix. However, the low crystallization temperature prevents its practical application in PCM. Here, Cr is doped into Sb₂Te₃, called Cr–Sb₂Te₃ (CST), to improve the thermal stability. We find that, with increase of the Cr concentration, grains are obviously refined. However, all the CST films exhibit a single hexagonal phase as Sb₂Te₃ without phase separation. Also, the Cr helps to inhibit oxidation of Sb atoms. For the selected film CST_10.5, the resistance ratio between amorphous and crystalline states is more than two orders of magnitude; the temperature for 10‐year data retention is 120.8 °C, which indicates better thermal stability than GST and pure Sb₂Te₃. PCM cells based on CST_10.5 present small threshold current/voltage (4 μA/0.67 V). In addition, the cell can be operated by a low SET/RESET voltage pulse (1.1 V/2.4 V) with 50 ns width. Thus, Cr–Sb₂Te₃ with suitable composition is a promising novel phase‐change material used for PCM with high speed and good thermal stability performances. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

活性炭/有机质复合相变材料的热-电性能

用活性炭(AC)作为支撑材料,石蜡(PW)、十六酸(PA)和硬脂酸(SA)作为相变主材,通过熔融共混法制备AC/PW、AC/PA和AC/SA复合相变材料,并考察了其热-电性能。结果表明,添加活性炭时有机质均不会泄漏;复合材料充-放热过程中温度场分布都比较均匀,热循环会使材料导热性能略有下降;此外,三种复合材料的电阻率均随压力增加而减小。     

Resilient and agile engineering solutions to address societal challenges such as coronavirus pandemic

The world is witnessing tumultuous times as major economic powers including the US, UK, Russia, India, and most of Europe continue to be in a state of lockdown. The worst-hit sectors due to this lockdown are sales, production (manufacturing), transport (aerospace and automotive) and tourism. Lockdowns became necessary as a preventive measure to avoid the spread of the contagious and infectious “Coronavirus Disease 2019” (COVID-19). This newly identified disease is caused by a new strain of the virus being referred to as Severe Acute Respiratory Syndrome CoronaVirus 2 (SARS CoV-2; formerly called 2019-nCoV). We review the current medical and manufacturing response to COVID-19, including advances in instrumentation, sensing, use of lasers, fumigation chambers and development of novel tools such as lab-on-the-chip using combinatorial additive and subtractive manufacturing techniques and use of molecular modelling and molecular docking in drug and vaccine discovery. We also offer perspectives on future considerations on climate change, outsourced versus indigenous manufacturing, automation, and antimicrobial resistance. Overall, this paper attempts to identify key areas where manufacturing can be employed to address societal challenges such as COVID-19.     

球形充气液泡所带电量及系统能量变化的分析

本文分析了球形充气液泡所带的电量,推导出一个较为普遍的计算公式,并分析了整个系统的能量变化关系.     

液滴撞击壁面铺展及换热过程数值模拟

基于喷雾冷却时液滴撞击壁面现象,本文采用CLSVOF(coupled level set and volume of fluid)方法对不同工况下单液滴撞壁过程进行数值模拟,获得了单液滴撞击热壁面动态特性;分析了初始速度、液滴直径等初始参数对液滴撞壁后的动态铺展规律以及壁面换热特性的影响规律,获得了上述参数变化时液滴铺...     

基于VOF方法的带相变的自由界面的计算

对于气液自由界面上存在相变(蒸发、沸腾或凝结)的情况,由于此时不仅物性分布是不连续的,速度场也发生了不连续,这无论对于捕捉或追踪自由界面的算法本身还是流场的求解都带来了一定的困难.本文提出一种基于VOF方法的计算带相变的自由界面的算法,对这种情况下的关键问题一速度场的不连续性给出了解决方法.并用编制的二维程序计算了水平壁面上的膜态沸腾,并将计算结果与理论公式进行了比较.     

高斯-谢尔模型光束通过光阑像散透镜传输轴上光谱变化

从部分相干光的传输理论出发,研究了高斯-谢尔模型(GSM)光束通过光阑像散透镜传输轴上的光谱变化规律.结果表明,与光源光谱相比,高斯-谢尔模型(GSM)光束通过光阑像散透镜传输轴上光谱发生了中心频率的移动,这种现象被称为光谱位移.详细分析了透镜的像散、光束的空间相关性和光阑的截断参量对光谱变化的影响.数值计算表明,这些参量会对光谱移动产生比较大的作用.     

基于特征圆单目视觉的飞机舵面角位移标定技术

提出了一种基于特征圆单目视觉的非接触式飞机舵面角位移标定技术。用一台数码摄像机对固定在飞机舵面上的特征圆进行拍照,经数字图像处理后确定五个特征点的坐标,利用针孔成像和射影变换原理建立物像空间坐标解算模型,计算出特征圆的法线相对方向和圆心的相对位置,舵面角位移由该圆的法线方向确定。仿真结果表明,该方法具有标定过程简单、实时、快速和准确的特点,标定精度可达到0.1°。该技术也可用于航天器上实时测量交会对接时的相对位姿参数。     

Finite element modelling of natural-convection-controlled change of phase

The problem of phase change in the presence of natural convection has been investigated. A model has been proposed based on the treatment of the release/absorption of latent heat as a heat source/sink in combination with the standard Galerkin finite element method with a primitive variable formulation on a fixed grid. To demonstrate the capabilities of the model, three cases of phase change of an aluminium alloy in the presence of natural convection arc considered, i.e. solidification, melting and combined solidification and melting. The solidification of water in a square cavity is modelled as another example, taking into account the density extremum, and the results are compared with a previously published work.