Investigation of the separation of scandium and rare earth elements from red mud by use of reversed-phase HPLC

A chromatographic method has been developed for separation and determination of scandium (Sc) and rare earth elements (REEs) in samples from a red mud (RM)-utilization process. Reversed-phase high-performance liquid chromatography (RP-HPLC) with post-column derivatization using 4-(2-pyridylazo)-resorcinol (PAR) and UV–visible detection at 520 nm was tested using different gradient elution profiles and pH values to optimize separation and recovery, primarily for Sc but also for yttrium and the individual lanthanides, from iron present in the samples. The separation was performed in less than 20 min by use of a mobile phase gradient. The concentration of -hydroxyisobutyric acid (-HIBA), as eluent, was altered from 0.06 to 0.4 mol L^–1 (pH 3.7) and 0.01 mol L^–1 sodium salt n-octane sulfonic acid (OS) was used as modifier. Very low detection limits in the nanogram range and a good resolution for Sc and REEs except for Y/Dy were achieved. Before application of the method to the red mud samples and to the corresponding bauxites, Sc and REEs were leached from red mud with 0.6 mol L^–1 HNO₃ and mostly separated, as a group, from the main elements by ion exchange/selective elution (6 mol L^–1 HNO₃) in accordance with a pilot-plant process developed in this laboratory. After evaporation of the eluent to dryness the extracted elements were re-dissolved in the mobile phase. By use of this chromatographic method Sc, which is the most expensive of the elements investigated and occurs in economically interesting concentrations in red mud, could be separated not only from co-existing Fe but also from Y/Dy, Yb, Er, Ho, Gd, Eu, Sm, Nd, Pr, Ce and La. All the elements investigated were individually recovered. Their recoveries were found to be nearly quantitative.     

野生与种植青海川西獐牙菜中微量元素的测定

为了对比野生与种植青海川西獐牙菜中微量元素的变化,分别采集野生川西獐牙菜与种植青海川西獐牙菜种子采收前后的全植株,采用原子吸收光谱仪测定了其铜、锌、铁、锰、钴等微量元素含量。结果表明,野生川西獐牙菜较种植青海川西獐牙菜中微量元素含量高,种植川西獐牙菜在成熟种子采收后较采收前(花果期)铁、锰、钴、锌等元素含量高。     

微量元素叶面肥料中硼的测定

研究了在 pH 6 .5乙酸铵缓冲溶液中 ,硼与 3 甲氧基 甲亚胺H的显色反应条件 ,最大吸收在 4 2 0nm处 ,摩尔吸光系数为 8.1× 10 3,硼含量在 0～ 10 μg/ 10ml范围内符合比耳定律。用于微量元素叶面肥料中硼的测定 ,获得了与国标法一致的结果     

火焰原子吸收光谱法测定南湖菱中矿质元素

用火焰原子吸收光谱法测定嘉兴南湖菱中钾、钠、钙、镁、铁、铜、锌、锰、镉、铅金属元素的含量。结果表明，南湖菱中有较高的矿物质营养价值，有害元素的含量低于国家食品允许标准。     

Energy-adjusted pseudopotentials for the rare earth elements

Nonrelativistic and quasirelativistic energy-adjusted pseudopotentials and optimized (7s6p5d)/[5s4p3d]-GTO valence basis sets for use in molecular calculations for fixed f-subconfigurations of the rare earth elements, La through Lu, have been generated. Atomic excitation and ionization energies from numerical HF, as well as SCF pseudopotential calculations using the derived basis sets, differ by less than 0.1 eV from numerical HF all-electron results. Corresponding values obtained from CI(SD), CEPA-1, as well as density functional calculations using the quasirelativistic pseudopotentials, are in reasonable agreement with experimental data.     

Ion Association in Lanthanide Chloride Solutions

A better understanding of the solution chemistry of the lanthanide (Ln) salts in water would have wide ranging implications in materials processing, waste management, element tracing, medicine and many more fields. This is particularly true for minerals processing, given governmental concerns about lanthanide security of supply and the drive to identify environmentally sustainable processing routes. Despite much effort, even in simple systems, the mechanisms and thermodynamics of Ln^III association with small anions remain unclear. In the present study, molecular dynamics (MD), using a newly developed force field, provide new insights into LnCl₃(aq) solutions. The force field accurately reproduces the structure and dynamics of Nd³⁺, Gd³⁺ and Er³⁺ in water when compared to calculations using density functional theory (DFT). Adaptive-bias MD simulations show that the mechanisms for ion pairing change from dissociative to associative exchange depending upon cation size. Thermodynamics of association reveal that whereas ion pairing is favourable, the equilibrium distribution of species at low concentration is dominated by weakly bound solvent-shared and solvent-separated ion pairs, rather than contact ion pairs, reconciling a number of contrasting observations of Ln^III–Cl association in the literature. In addition, we show that the thermodynamic stabilities of a range of inner sphere and outer sphere coordination complexes are comparable and that the kinetics of anion binding to cations may control solution speciation distributions beyond ion pairs. The techniques adopted in this work provide a framework with which to investigate more complex solution chemistries of cations in water.     

Topological Space of the Chemical Elements and its Properties

We carried out a mathematical study of 72 chemical elements taking advantage of the chemotopological method. We selected 128 properties to define the elements (physico-chemical, geochemical and chemical properties). Then, we looked for correlated properties and we reduced the number of them to 90. In this way we defined each element as a 90-tuple. Afterwards, we applied principal component analysis and cluster analysis (4 similarity functions and 5 grouping methodologies). Then, we calculated a consensus tree for the 20 dendrograms generated by the CA. Afterwards, we extracted the similarity relationships from the consensus tree and built up a basis for a topology on the set of chemical elements. Finally, we calculated some topological properties (closures, derived sets, boundaries, interiors and exteriors) of several subsets of chemical elements. We found that alkali metals, alkaline earth metals and noble gases appear not related to the rest of the elements. Also, we found that the boundary of non-metals are the semimetals with a stair-shape on the periodic table     

As, Bi, Sb and Sn determination in atmospheric particulate matter by direct solid sampling-hydride generation-electrothermal atomic absorption spectrometry

A novel, rapid and simple method by hydride generation-electrothermal atomic absorption spectrometry (HG-ETAAS) after direct As, Bi, Sb and Sn hydrides generation from untreated filters of atmospheric particulate matter (PM₁₀ and PM_2.5) was optimised. PM₁₀ and PM_2.5 were not subjected to any pre-treatment: circular portions between 0.28 and 6.28 cm² were directly placed into the reaction vessel of a batch mode generation system. A 2⁸ × 3/64 Plackett–Burman design was used as a multivariate strategy for the evaluation of the effects of several variables affecting the hydride generation, trapping and atomisation efficiencies. Trapping temperature was the most statistically significant variable for As, Bi and Sn. Atomisation temperature was also statistically significant for Sb determination. Optimum values of significant variables were selected by using univariate optimisation approaches. An aqueous calibration method was used throughout. The developed method has been found to be precise with relative standard deviations of 6.2, 5.3, 9.1 and 7.5% for 11 determinations in a filter sample containing 0.7, 1.0, 1.4 and 1.7 μg l⁻¹ for As, Bi, Sb and Sn, respectively. Results obtained by direct solid sampling-HG-ETAAS have been found statistically comparable with those obtained after conventional method based on an acid digestion followed to ICP-MS. Absolute detection limits were 37, 15, 30, and 41 ng l⁻¹ for As, Bi, Sb and Sn, respectively. Detection limits referred to the air volume sampled (in the range of 0.020–0.050 ng m⁻³) were low enough for the determination of several hydride-forming elements from PM₁₀ and PM_2.5 samples collected in a non-polluted suburban area of A Coruña (NW Spain).