Ru-catalyzed highly enantioselective hydrogenation of α-keto Weinreb amides

Asymmetric hydrogenation of α-keto Weinreb amides has been realized with [Ru((S)-Sunphos)(benzene)Cl]Cl as the catalyst and CeCl 3·7H2O as the additive.A series of enantiopure α-hydroxy Weinreb amides(up to 97% ee) have been obtained.Catalytic amount of CeCl3·7H2O is essential for the high reactivity and enantioselectivity and the ratio of CeCl3·7H2O to [Ru((S)-Sunphos)(benzene)Cl]Cl plays an important role in the hydrogenation reaction.     

罗曼紫复合试剂用于中药中汞残留的共振光散射光谱测定

光散射信号在药物颗粒分析检测中具有广泛应用.本文将其应用于中药中汞残留量测定.研究发现,-氨基酸与水合茚三酮(Ninhydrin)反应形成的罗曼紫(Ruhemann’s purple,RP)复合试剂在pH5.5醋酸-醋酸钠缓冲溶液中能和汞(Hg2+)形成配合物,溶液由蓝紫色变为粉红色,对应的光散射信号随着Hg2+浓度增大而增强.据此,本文在评价该复合试剂能应用于分析测定的基础上,建立了Hg2+的共振光散射测定法.340nm处光散射增强强度和8.0×107~6.0×105mol/L的Hg2+呈良好的线性关系,方法检出限(3)为6.2×108mol/L.用于养血安神片、云南白药粉末和逍遥丸三种中药制剂中残留汞的加标回收测定,回收率在95.7%~106.5%范围内,相对标准偏差小于3.94%.     

Modeling mass transfer of CO2 in brine at high pressures by chemical potential gradient

To investigate long-term CO2 behavior in geological formations and quantification of possible CO2 leaks, it is crucial to investigate the potential mobility of CO2 dissolved in brines over a wide range of spatial and temporal scales and density distributions in geological media. In this work, the mass transfer of aqueous CO 2 in brines has been investigated by means of a chemical potential gradient model based on non-equilibrium thermodynamics in which the statistical associating fluid theory equation of state was used to calculate the fugacity coefficient of CO2 in brine. The investigation shows that the interfacial concentration of aqueous CO2 and the corresponding density both increase with increasing pressure and decreasing temperature; the effective diffusion coefficients decrease initially and then increase with increasing pressure; and the density of the CO2 -disolved brines increases with decreasing CO2 pressure in the CO2 dissolution process. The aqueous CO2 concentration profiles obtained by the chemical potential gradient model are considerably different from those obtained by the concentration gradient model, which shows the importance of considering non-ideality, especially when the pressure is high.     

Efficiency improvement of flexible dye-sensitized solar cells by introducing mesoporous TiO2 microsphere

Mesoporous TiO2microsphere(MTM)was synthesized via a simple solution route and then mixed with commercial TiO2(P25)to form highly homogeneous and stable TiO2colloid by simple hydrothermal treatment.The TiO2colloid was coated onto the plastic conductive substrate to prepare mesoporous TiO2film for flexible dye-sensitized solar cells(DSSCs)by low-temperature heat treatment.The influence of MTM content on the physicochemical properties of the flexible TiO2film was characterized by scanning electron microscope,transmission electron microscopy,X-ray diffraction,energy-dispersive X-ray spectrometer,N2adsorption-desorption isotherms,UV–vis absorption and diffuse reflectance spectra.It is revealed that with increasing the MTM content,the dye-loading capability of TiO2film and light-harvesting efficiency of flexible DSSCs are improved due to MTM having high surface area and acting as a light scattering center,respectively,resulting in the enhancement of photocurrent of flexible DSSCs.However,more and larger cracks having negative effect on the performances of flexible DSSCs are formed simultaneously.Under the optimal condition with MTM content of 20%,a flexible DSSC with overall light-to-electric energy conversion efficiency of 2.74%is achieved under a simulated solar light irradiation of 100 mW cm 2(AM 1.5),with 26%improvement in comparison with DSSCs based on P25 alone.     

锂离子电池用α-Fe2O3-Ag复合纳米棒负极材料的制备及储锂性能

采用FeOOH纳米棒为前驱体,通过层层自组装法及随后的热处理过程制备出α-Fe2O3-Ag复合纳米棒.采用透射电子显微镜(TEM)、高分辨透射电子显微镜(HRTEM)和电化学性能测试对样品的形貌、结构及电化学性能进行了表征.结果表明,Ag纳米颗粒均匀地分布在α-Fe2O3纳米棒的表面.作为锂离子电池负极材料,α-Fe2O3-Ag复合纳米棒表现出了较好的循环性能和较高的比容量.180个循环后,其比容量高达549.8 mA.h/g.     

Cu-V-O氧化物催化燃烧甲苯的活性和抗硫性

采用溶胶-凝胶法制备一系列不同Cu/V比例的Cu-V-O催化剂,利用XRD、BET、H₂-TPR等手段对催化剂进行了表征,并考察其催化燃烧甲苯的活性和抗硫性。结果表明,适量的Cu掺杂会提高催化剂比表面积,而且Cu-V可以形成Cu₃V₂O₈晶型结构,使V₂O₅晶格氧活动增加,提高催化剂氧化-还原能力。其中,Cu_0.15V_0.85催化剂表现出最佳的活性和抗硫性;通过TiO₂负载可以进一步提高催化剂对甲苯的催化燃烧活性和抗硫性。     

蒸汽活化生物质焦吸附模拟烟气中SO2和NO的研究

以麦秆和稻壳生物质为研究对象,在不同的热解温度、热解速率以及蒸汽活化温度条件下制备了生物质焦,采用比表面积与孔隙度分析仪测定生物质焦的比表面积和孔隙结构参数。利用固定床吸附装置,研究了热解温度、热解速率、活化温度和模拟烟气中SO₂和NO浓度等因素对生物质焦吸附SO₂和NO性能的影响。结果表明,蒸汽活化可以显著提高生物质焦的BET比表面积、D-R比表面积、D-R微孔容积和总孔容,降低其平均孔径,并显著增加蒸汽活化生物质焦对SO₂与NO吸附的起始穿透时间和吸附量。快速热解下制得的蒸汽活化焦对SO₂和NO的吸附效果优于慢速热解,热解温度为873 K的蒸汽活化焦的吸附性能明显好于热解温度为673与1 073 K的蒸汽活化焦。在973~1 173 K下,随着蒸汽活化温度的提高,蒸汽活化生物质焦对SO₂和NO的吸附量呈现先上升后下降的趋势。随着模拟烟气中SO₂与NO浓度的降低,蒸汽活化生物质焦对SO₂与NO吸附的起始穿透时间延长,但相应的SO₂和NO吸附量下降。在873 K、快速热解和1 073 K条件下制得的蒸汽活化麦秆焦对SO₂和NO吸附量最大,其值分别为109.02和21.77 mg/g。     

Fe2O3/Al2O3氧载体用于甲烷化学链燃烧：负载量与制备方法的影响

以不同方法制备了系列Fe₂O₃/Al₂O₃氧载体,采用XRD、H₂-TPR、CH₄-TPR、O₂-TPD和BET等分析技术对氧载体进行了表征。研究了不同Fe₂O₃负载量氧载体的甲烷化学链燃烧性能,考察了不同制备方法对Fe₂O₃/Al₂O₃氧载体结构、反应性和产物选择性的影响。结果表明,Fe₂O₃负载量对氧载体活性及产物中CO₂选择性的影响较大,负载量较低时氧载体活性较低且引起甲烷部分氧化产物CO含量增加。制备方法亦对氧载体与甲烷的反应活性有所影响,整体上共沉淀法制备的质量分数60％Fe₂O₃/Al₂O₃氧载体具有较高的氧化活性和化学链循环稳定性。其在反应温度850℃、反应时间15 min、30次循环后甲烷转化率及产物中CO₂选择性均未见明显降低。     

β2-AR激动剂BI-167107的合成

BI-167107是一种新的长效β2肾上腺素受体(β2-AR)激动剂,在鉴定G蛋白偶联受体(GPCR)/配体络合物的结构方面具有重要应用.以2-硝基间苯二酚为原料,经过七步反应,合成了目标化合物,其结构经1H NMR,13C NMR和MS确证.此合成路线的优点是避免了使用有毒试剂,可以便捷地用于制备较大量的BI-167107及结构相近的苯并噁嗪类化合物.     

溶胶-凝胶新方法合成介孔铁酸铜纳米粉体催化剂上CO低温氧化(英文)

Mesoporous CuFe2O4 solid solution nanopowders with high specific surface areas were synthesized by a novel, very simple and inexpensive sol-gel route using propylene oxide as gelation agent, and used as the catalyst in low temperature CO oxidation. The samples were characterized by X-ray diffraction, N2 adsorption-desorption, thermogravimetric/differential thermal analysis, Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, and temperature-programmed reduction. The results revealed that the samples have a nanocrystalline structure with crystals in the range of 10 to 25 nm, and that all the catalysts have mesoporous pores. The addition of Cu into iron oxide affected its structural and catalytic properties. The sample containing 15 mol% Cu showed the highest specific surface area and catalytic activity, and showed high catalytic stability in low temperature CO oxidation.