Comparative research on the transmission-mode GaAs photocathodes of exponential-doping structures

Early research has shown that the varied doping structures of the active layer of GaAs photocathodes have been proven to have a higher quantum efficiency than uniform doping structures.On the basis of our early research on the surface photovoltage of GaAs photocathodes,and comparative research before and after activation of reflection-mode GaAs photocathodes,we further the comparative research on transmission-mode GaAs photocathodes.An exponential doping structure is the typical varied doping structure that can form a uniform electric field in the active layer.By solving the one-dimensional diffusion equation for no equilibrium minority carriers of transmission-mode GaAs photocathodes of the exponential doping structure,we can obtain the equations for the surface photovoltage(SPV) curve before activation and the spectral response curve(SRC) after activation.Through experiments and fitting calculations for the designed material,the body-material parameters can be well fitted by the SPV before activation,and proven by the fitting calculation for SRC after activation.Through the comparative research before and after activation,the average surface escape probability(SEP) can also be well fitted.This comparative research method can measure the body parameters and the value of SEP for the transmission-mode GaAs photocathode more exactly than the early method,which only measures the body parameters by SRC after activation.It can also help us to deeply study and exactly measure the parameters of the varied doping structures for transmission-mode GaAs photocathodes,and optimize the Cs-O activation technique in the future.     

The separation single-wall carbon nanotubes on length by sepharose gel

The separations of single-wall carbon nanotubes on length by sepharose gel were investigated in this work. The solutions of sodium dodecyl sulfate and sodium deoxycholate were applied as the eluent in sequence. SEM and Raman were used to characterize the length of nanotube bundles. The results show that the longer nanotubes were eluted out first, and then the shorter tubes were followed by the sodium dodecyl sulfate. However, the separated order was totally reversed by the sodium deoxycholate. By this method, the process generated nanotube fractions not only were narrower in length distributions, but also could control the separation orders by changing the eluents. Moreover, the separation principle was also discussed.     

Strength of metals at the Fermi length scale

Using silver and gold, we have measured the size‐dependence of the yield strength of atomic‐sized samples as small as a single‐atom bridge, with pico‐level resolution in the applied force and displacement. The strength approaches theoretical values as the diameter of the sample becomes comparable to the Fermi wavelength of electrons (～0.5 nm); in the limit of a single‐atom bridge, the strength is over four orders of magnitude higher than in bulk single crystals. Results provide direct evidence for Pauling's prediction of bond stiffening with reduced atomic coordination. Beginning with a single‐atom bridge, strength evolves in a staircase manner in Ag, instead of the intuitively assumed continuous approach to a saturating bulk value.

     

Pool boiling heat transfer of ultra-light copper foam with open cells

High speed visualizations and thermal performance studies of pool boiling heat transfer on copper foam covers were performed at atmospheric pressure, with the heating surface area of 12.0 mm by 12.0 mm, using acetone as the working fluid. The foam covers have ppi (pores per inch) from 30 to 90, cover thickness from 2.0 to 5.0 mm, and porosity of 0.88 and 0.95. The surface superheats are from −20 to 190 K, and the heat fluxes reach 140 W/cm². The 30 and 60 ppi foam covers show the periodic single bubble generation and departure pattern at low surface superheats. With continuous increases in surface superheats, they show the periodic bubble coalescence and/or re-coalescence pattern. Cage bubbles were observed to be those with liquid filled inside and vented to the pool liquid. For the 90 ppi foam covers, the bubble coalescence takes place at low surface superheats. At moderate or large surface superheats, vapor fragments continuously escape to the pool liquid.     

基于偶应力理论的格栅材料等效介质模型

考察了结构最小尺寸与材料特征长度量级相当的格栅材料等效性能,建议了基于偶应力理论的格栅材料等效介质模型以及确定等效模量的代表体元模型,给出了相应的位移边界条件. 在此基础上导出了正交各向异性偶应力介质的特征长度表达式和偶应力介质梁的抗弯刚度表达式,定义了偶应力影响因子\delta以表征梁的偶应力效应. 具体计算了几种典型的格栅材料的等效偶应力模量以及格栅梁在一定工况下的挠曲线,并与相应的有限元离散解进行对比,结果表明,等效结果具有较高精度,且当宏观结构的尺寸和微结构尺寸相差不大时,宏观结构表现出强烈的偶应力效应.偶应力介质的特征长度表征了偶应力效应的强弱,进而分析了格栅材料的相对密度,单胞尺寸以及几何构型对等效介质特征长度的影响.      

Bubble generation and transport in a microfluidic device with high aspect ratio

Bubble generation and transport in a micro-device composed of a micro-T-junction and a following serpentine micro-channel was experimentally investigated. It has a rectangular cross-sectional with an aspect ratio of 7.425. Air and water were used as gas and liquid, respectively. Mixtures of water–glycerol and water–Tween-20 were used to study the effects of liquid viscosity and surface tension. Compared with previous T-junction bubble generation, the liquid and gas inlets orientation was switched in this work. The continuous flow was driven from the perpendicular channel and the dispersion flow was from the main channel. It shows that the break-up process has three periodic steps under certain operating conditions. The dimensionless bubble length L/w in the micro-channel with high aspect ratio is much larger than that in square microchannels. A correlation is proposed to correlate L/w with liquid flow rate J_L, gas flow rate J_G, and liquid viscosity μ_L. Surface tension σ can change the bubble shape but almost does not affect the bubble length in this fast break-up process. Additionally, a long bubble may be broken up at the corners at the same time because the locations of gas and liquid are exchanged relative to the concave and convex portions of an elbow after a turn which may result in the change of fluid velocities and gas–liquid pressure drop.     

Thermodynamic theory of the Tolman’s length

There still exists controversy on the sign and magnitude of the Tolman’s length and the Tolman’s gap.Further experimental,computational and theoretical investigations on them are needed to solve this problem.In 2006,Blokhuis and Kuipers obtained a rigorous relationship between the Tolman’s length and other thermodynamic quantities for the single-component liquid-vapour system.In the present paper,we derive two general relationships between the Tolman’s length and other thermodynamic quantities for the single-component liquid-vapour system.The relationship derived by Blokhuis and Kuipers and an earlier result turn out to be two special cases of our results.     

平面液体层碎裂过程实验研究

小宽厚比喷嘴喷射出的平面水膜进入静止空气中,在不同气流流速环境下对水膜碎裂过程进行了实验研究。结果表明,静止空气中的水膜表面波呈现对称波形,射流的碎裂长度随雷诺数的增大而增大,喷射压力对射流碎裂长度没有直接影响。空气助力作用使平面射流表面波的上、下气液交界面出现相位差。水膜的碎裂长度随空气助力气流速度的增大而减小;空气助力对于低雷诺数水膜射流具有很强的促进碎裂作用,所以会极大地改善低雷诺数射流的一次雾化效果。随着水流雷诺数的提高,空气助力作用对水膜碎裂长度的影响大为减弱;即使在高速助力空气的作用下,水膜仍长期保持较稳定的射流流态,没有出现明显的水膜撕裂现象。说明在小宽厚比喷嘴的瑞利(Rayleigh)模式射流中,高雷诺数射流是水膜的稳定因素。与气液流速比、气流马赫数等无量纲参数相比,液体喷射的雷诺数是射流碎裂的主要影响因素。     

基于多星同步检测的惯导误差实时测量方法

针对目前利用单星分时测量方法检测惯性导航装备姿态误差存在的疑义,提出利用多星同步检测定位定向技术实现惯导姿态误差实时测量。对测量方案进行初步设计,重点介绍大视场多星定位定向技术的基本原理和数学模型。并对星体静态检测、动态检测和星图识别等关键技术进行理论分析计算,为提高惯性导航装备姿态误差实时测量精度提供了一种可行的方法。误差分析计算结果表明,静态条件下位置精度小于100m,满足测量要求。     

Continual deformation analysis with scanning phase method and time sequence phase method in temporal speckle pattern interferometry

If a laser beam illuminates a continual deformation object surface, it will lead to a temporal speckle pattern on the observation plane. Recording this time-dependent speckle pattern the deformation of the surface of an object can be obtained. Two methods, scanning phase method (SPM) and time sequence phase method (TSPM), have been introduced for measuring the displacement caused by the deformation in temporal speckle pattern interferometry (TSPI). Their principle is that by capturing a series of speckle interference patterns related to the object deformations, the fluctuations in the intensity of the interference patterns can be obtained. Through scanning these fluctuations and estimating both the average intensity and modulation of the temporal speckle interference patterns, the phase maps for whole-field displacements are calculated. In this way one is capable of quantitatively measuring continual displacements simply using a conventional electronic speckle pattern interferometry (ESPI) system without phase shifting or a carrier. The elaboration on the new methods is given in this paper and experiments are performed to demonstrate their performance with a conventional ESPI system.