一种四次有理插值样条及其逼近性质

1引言有理样条函数是多项式样条函数的一种自然推广,但由于有理样条空间的复杂性,所以有关它的研究成果不象多项式样条那样完美,许多问题还值得进一步的研究．近几十年来,有理插值样条,特别是有理三次有理插值样条,由于它们在曲线曲面设计中的应用,已有许多学者进行了深入研究,取得了一系列的成果(见[1]-[7])．但四次有理插值样条由于其构造所花费的计算量太大以及在使用上很不方便而让人们忽视了其重要的应用价值,因此很少有人研究他们．实际上,在某些情况下四次有理插值样条有其独特的应用效果,如文[8]建立的一种具有局部插值性质的分母为二次的四次有理样条,即一个剖分     

自适应H.264可变块编码模式选择算法

为了减少H.264/AVC帧间编码模式选择的计算复杂度,利用编码模式之间的相关性以及视频序列时空域的相关性,提出了有选择性的小块搜索技术和有选择性的帧内编码模式搜索技术。模拟结果表明,该算法在保持率失真性能的前提下可以大幅度减少模式选择的计算复杂度,有利于H.264的实时应用。     

固定效应部分线性单指标面板模型的惩罚二次推断估计

单指标面板模型已广泛应用于各学科领域的研究中,其估计方法较为丰富,然而鲜有估计方法将个体内的相关性考虑在内.基于此,本文研究了一类个体内存在相关性的固定效应部分线性单指标面板模型,采用惩罚二次推断函数法和LSDV法相结合的方法对模型进行估计,证明了所得估计量的一致性和渐近正态性.Monte Carlo模拟结果显示其具有...     

Estimation of coefficient of variation in a weighted inverse Gaussian model

The coefficient of variation is an important parameter in many physical, biological and medical sciences. In this paper we study the estimation of the square of the coefficient of variation in a weighted inverse Gaussian model which is a mixture of the inverse Gaussian and the length biased inverse Gaussian distribution. This represents a rich family of distributions for different values of the mixing parameter and can be used for modelling various life testing situations. The maximum likelihood as well as the Bayes estimates of the parameters are obtained. These estimates are used to derive the estimates of the square of the coefficient of variation of the model under study. Several important data sets are analysed to illustrate the results. © 1996 John Wiley & Sons, Ltd.     

基于改进U-Net++的CT影像肺结节分割算法

卷积神经网络的语义分割模型未有效利用特征权重信息,导致在医学图像复杂场景中分割边界出现欠分割现象.针对该问题,基于融合自适应加权聚合策略提出一种改进的U-Net++网络,并将其应用于电子计算机断层扫描影像肺结节分割.该模型首先在卷积神经网络中提取出不同深度特征语义级别的信息,再结合权重聚合模块,自适应地学习各层特征的权...     

一种基于序贯估计的直达声区水面舰船 被动测距方法 *

该文利用基于射线的盲解卷积方法,从直达声区的水面舰船噪声中提取出船和锚系于海底的垂直接收阵之间的时域信道响应,并利用直达波在不同阵元相对于参考阵元的到达时间差,通过序贯方法,利用射线模型和声速剖面信息,对水面舰船距接收阵的距离进行了估计。通过处理海深约为580 m的2016年美国圣巴巴拉海峡的实验数据,对1.6~3.5 km直达声区范围内Anna Maersk商船与垂直阵之间的距离进行了估计,验证了测距方法的有效性,并将结果与系统测量值和几何方法的估计值进行了比较。由于该方法不需要对海底参数进行估计,所以在海底参数未知时要优于传统匹配场方法;在声速剖面存在跃层且海底为多层分布的复杂信道条件下,该方法仍能对距离进行有效估计,且与测量值的相对误差在6%以内,小于几何方法的估计误差,测距结果精度较高。     

基于路径选择的深海水下运动目标被动深度估计

深海水下运动目标的深度估计是目标分辨与识别中的重要一环。基于深海运动目标在深海中的直达波与海面反射波的到达时延与位置之间的关系,寻找时延图上运动目标的候选路径,利用候选路径模拟目标的运动路径,提出了一种可用单水听器实现的水下运动目标深度估计方法。通过用候选路径的估计时延与实际接收时延的比较对路径进行筛选,从而减少了需要的位置先验信息。2018年在南海进行的深海实验数据处理的结果表明该估计方法可行,对于实验中距离15km以内的拖曳声源,深度相对估计误差可以达到15%以内。     

Wettability and surface energy of parylene F deposited on PDMS

For the first time, the wettability and surface energy of parylene F were investigated. The results showed that parylene F had a hydrophobic surface with an eigen water contact angle of 104.7 ± 0.6°. We found that 3.5 μl probe liquid was an optimal value for the contact angle measurement of parylene F. Moreover, we found that the Lifshitz–van der Waals/acid–base approach was unsuitable for determining the surface energy of parylene F, whereas the Owens–Wendt–Kaelble approach and the limitless liquid–solid interface wetting system were compatible. The surface energy of parylene F was estimated to be 27.06 mJ/m² (Owens–Wendt–Kaelble) and 40.41 mJ/m² (Limitless liquid-solid interface wetting system). Furthermore, this investigation also provided a reference for the applications of empirical and physics-based semi-empirical approaches for the estimation of surface energy.     

矿产品水分含量代表值Bootstrap模拟取样估计

在对矿产品水分含量基础统计学特征描述的基础上,采用内核密度估计对水分含量数据多态性进行了分析,根据双态分布的特点,使用Bootstrap模拟取样方法对试验样本值模拟重复取样,以多次Bootstrap模拟取样的均值与标准偏差作为矿产品水分含量有限样本代表值及标准偏差的稳健估计,实践证明Bootstrap模拟取样估计对矿产品水分含量代表值的估计是有效的,该项研究为矿产品水分含量代表值的准确评估提供了一种新方法.     

Evaluation of tocopherol recovery through simulation of molecular distillation process

DISMOL simulator was used to determine the best possible operating conditions to guide, in future studies, experimental works. This simulator needs several physical-chemical properties and often it is very difficult to determine them because of the complexity of the involved components. Their determinations must be made through correlations and/or predictions, in order to characterize the system and calculate it. The first try is to have simulation results of a system that later can be validated with experimental data. To implement, in the simulator, the necessary parameters of complex systems is a difficult task. In this work, we aimed to determe these properties in order to evaluate the tocopherol (vitamin E) recovery using a DISMOL simulator. The raw material used was the crude deodorizer distillate of soya oil. With this procedure, it is possible to determine the best operating conditions for experimental works and to evaluated the process in the separation of new systems, analyzing the profiles obtained from these simulations for the falling film molecular distillator.