Experimental Study on Wave Characteristics of Stilling Basin with a Negative Step

Stilling basin with a negative step is an important structure in hydraulic systems, because it can avoid atomization and decrease scouring problems. Although stilling basins with a negative step have attracted much attention from researchers, few researchers have focused on the wave characteristics. In this research, an experimental study on the wave characteristics of stilling basins with a negative step was carried out. The wave height, average period, wave probability density and power spectrum along the flow direction of different stilling basins with a negative step were described based on the wave theory, and the results indicate discharge and step height have a significant effect on the wave characteristics. The relationships between the different characteristic wave heights, and the empirical formula for the relative characteristic wave height are obtained. Finally, the dimensionless standard deviation at the end of the stilling basin with a negative step is linearly related to the flow-energy ratio and the relative step height under B-jump.     

Numerical and Experimental Investigation of the Conjugate Heat Transfer for a High-Pressure Pneumatic Control Valve Assembly

This paper uses heat transfer experiments and computational fluid dynamics (CFD) simulations to investigate the conjugate heat transfer (CHT) in a high-pressure pneumatic control valve assembly. A heat transfer test rig was constructed, and time–temperature histories of five test points placed on the valve assembly’s outer surface were recorded for study validation. The Unsteady Reynolds-Averaged Navier–Stokes (URANS) CFD methods with the standard k-ε turbulence closure equations were adopted in the numerical computations. Polyhedral grids were used; time step and mesh convergence studies were conducted. Simulated and measured temperatures profile comparisons revealed a good agreement. The CHT results obtained from CFD showed huge velocity fields downstream of the valve throat and the vent hole. The airflow through the valve was icy, mainly in the supersonic flow areas. Low temperatures below 273.15 K were recorded on the internal and external walls of the valve assembly. The consistency of the measured data with the numerical results demonstrates the effectiveness of polyhedral grids in exploring the CHT using CFD methods. The local entropy production rate analysis revealed that irreversibility is mainly due to viscous dissipation. The current CHT investigation provides a potential basis for thermostress analysis and optimization.     

基于饱依丁-汤姆逊模型的软岩损伤蠕变模型

为更加准确地描述深部软岩的蠕变全过程,以饱依丁-汤姆逊模型为基础,将损伤变量引入到蠕变方程中,并构造了可描述加速蠕变阶段的模型元件,通过串联得到了新的蠕变模型。结果表明:该模型能够较好地描述软岩的衰减蠕变、稳态蠕变、加速蠕变阶段。用该模型对泥质页岩的蠕变试验结果进行数据拟合对比,结果显示该模型的拟合曲线与实验曲线基本吻合,拟合度为0.99733,能够很好地反映出软岩蠕变的特性,适合用于描述深部软岩的蠕变行为。     

单相旋转型驻波超声电机的数学模型及仿真

尽管单相驱动的旋转型驻波超声电机的原理样机早巳研制成功，但对这类电机的运动机理的研究却一直局限在定性分析上。本文将从能量角度，根据Hamilton变分原理，定、转子摩擦界面采用纯滑动模型建立了该种电机的数学模型；并根据此模型，用MATLAB语言作了计算机仿真，得到了该种电机的开、关过程动态响应。     

薄壁件加工系统动态响应分析

薄壁件在铣削加工中容易产生共振或变形,直接影响加工稳定性及加工精度。采用主轴-刀具-工件整体铣削系统连续梁模型,系统研究在动态铣削力作用下,刀具端部与工件端部的动态响应之间的相互影响关系以及对整体系统动态响应影响较大的薄壁件尺寸。结果表明,工件横截面高度对系统共振的影响较为明显,当高度尺寸较小时,工件的低频共振会通过动态铣削力直接反映到刀具端部的振动频响上。工件横截面底边宽度尺寸的增大虽然对共振频率的改变不太明显,但会导致激发出来的刀具共振幅度出现明显降低。研究成果可以为薄壁件铣削加工系统的稳定性控制提供理论基础。     

基于波动模态耦合的铝电解槽磁流体稳定性傅立叶级数法分析

铝电解槽内磁流体稳定性对铝电解生产有重要影响。本文结合铝电解槽实体仿真的电磁场计算结果,应用傅立叶级数法对槽内磁流体波动稳定性进行数值计算,并对波动的模态耦合问题进行了重点分析。在此基础上,本文以某320kA铝电解槽为研究载体分析了槽长宽比设计对磁流体稳定性的影响,结果表明:波动的不稳定分量集中分布在频谱图中重力波模态密集的低频区域;不考虑母线对体系的影响,增大槽的长宽比,有利于提高磁流体的稳定性。     

个人住房抵押贷款模式及应用

提出了等比还贷,等差还贷,基于等额的灵活还贷和混合还贷4种模式,举例分析并指出了各模式适合的客户类型,最后对贷款利率调整时各模式的有关变化作了进一步的探讨,各种还贷模式可根据具体情况在实践中推广应用。     

An interpretation of COVID-19 in Tokyo using a combination of SIR models

A year and a half has passed since the outbreak of the COVID-19 pandemic. Mathematical models to predict infection are expected and many studies have been conducted. In this study, a new interpretation was created that could reproduce the daily positive cases in Tokyo using only a simple SIR model. In addition, the data on the ratio of transfer to delta variants could also be simulated. It is anticipated that this interpretation will be a basis for the development of forecasting methods.