Acetyltrimethylsilane mediated synthesis of dihydrophenanthrenes

An easy and efficient synthesis of phenanthrene derivatives through base catalyzed ring transformation of 4-sec-amino-2-oxo-5,6-dihydro-2H-benzo[h]chromene-3-carbonitriles with acetyltrimethylsilane is described in good yields. The advantage of this reaction is the direct transformation of 2-oxobenzo[h]chromene into phenanthrene via C-C insertion from acetyltrimethylsilane.     

Iodocyclization/base-induced hydrodeiodination reaction of 5-substituted 4-alkenols. The influence of substituent on the stereoselective pathway

The electrophilic iodocyclization reaction of (Z)- and (E)-5-n-alkylsubstituted 4-alken-1-ols followed by base-induced hydrodeiodination reaction stereoselectively gave, respectively, (Z)- and (E)-alkylidentetrahydrofurans in high yield. Completely different outcomes were observed with (Z)- and (E)-6,6-dimethylhept-4-en-1-ol: their iodocyclization furnished, respectively, threo- and erythro-2-(1-iodo-2,2-dimetylpropyl)tetrahydrofuran with high stereoselectivity. The threo isomer gave clean formation of 6-tert-butyl-3,4-dihydro-2H-pyran by base-induced ring expansion, while erythro isomer underwent a base-induced ring contraction to 1-cyclopropyl-3,3-dimethylbutan-1-one. Moreover, (Z)- and (E)-5-cyclopropylpent-4-en-1-ol underwent a 6-endo-iodocyclization to threo- and erythro-2-cyclopropyl-3-iodotetrahydro-2H-pyran, respectively, that under the same basic treatment, gave two isomeric 6-cyclopropyldihydro-2H-pyrans in a stereoselective fashion.     

Untersuchungen von Reaktionsmechanismen durch Isotopenmarkierung,IX Zum Ringverengungsmechanismus von 1,4-Benzthiazin-2,3-4H-dion

By¹⁴C-labeling it is shown that the ring contraction reaction of 1,4-benzothiazin-2,3-4H-dione (1), leading via benzthiazol-2-carbonic acid (2) finally to benzthiazole (3), proceeds via hydrolytic opening of the thiolactone-bond in1, irrespectively of H⁺ or OH^– catalysis.

     

Lewis acid mediated SN2-type nucleophilic ring opening followed by [4+2] cycloaddition of N-tosylazetidines with aldehydes and ketones: synthesis of chiral 1,3-oxazinanes and 1,3-amino alcohols

A highly efficient strategy for Cu(OTf)₂ mediated S_N2-type nucleophilic ring opening followed by [4+2] cycloaddition reactions of enantiopure 2-phenyl-N-tosylazetidines with various aldehydes and ketones afforded a variety of substituted 1,3-oxazinanes and 1,3-amino alcohols in excellent yields, excellent de and good to excellent ee. The proposed S_N2-type mechanism of the cycloaddition reaction is supported by experimental evidence.     

Synthetic studies toward macrocidins: an RCM approach for the construction of the central cyclic core

The central macrocyclic core of the macrocidins was constructed using RCM as the key reaction. A preliminary investigation dealing with the key reactions, that is, the Dieckmann cyclization and the RCM, revealed that RCM of the β-ketoamide is better than RCM of the corresponding acyltetramic acid.     

Enantioselective synthesis of (+)-anatoxin-a via enyne metathesis

A concise synthesis of the potent nAChR agonist (+)-anatoxin-a (1) has been completed by a series of nine chemical operations and in 27% overall yield from commercially available d-methyl pyroglutamate (12). The strategy featured the application of a new protocol for the diastereoselective synthesis of cis-2,5-disubstituted pyrrolidines bearing unsaturated side chains and an intramolecular enyne metathesis to provide the bridged bicyclic framework of 1. Thus, d-methyl pyroglutamate (12) was converted in five steps to 32, which underwent facile enyne metathesis to deliver the bicyclic diene 33. Selective oxidative cleavage of the less substituted carbon-carbon double bond in 33 followed by deprotection furnished (+)-anatoxin-a (1).     

An efficient synthesis of 4,5-dihydronaphtho[2,1-b]furan through a novel ring transformation of 2H-pyran-2-one

An innovative route for the synthesis of substituted naphtho[2,1-b]furan has been delineated through a ring transformation reaction of suitably functionalized 2H-pyran-2-ones by reaction with 6,7-dihydro-5H-benzofuran-4-one, in good yield.     

Total Synthesis of (+)‐β‐Himachalene

An enantioselective synthesis of (+)‐β‐himachalene ( 2 ) was accomplished starting from (1S,2R)‐1,2‐epoxy‐p‐menth‐8‐ene ( 3 ) in 15 or 16 steps with an overall yield of ca. 6% (Schemes 3, 5, and 6). Key transformations include an Ireland–Claisen rearrangement, a Corey oxidative cyclization, and a ring expansion.     

Syntheses,Crystal Structures and Properties of the Tetrametaphosphimates MII2(PO2NH)4 · 8 H2O with MII = Mg,Mn, Co and Zn

Mg₂(PO₂NH)₄ · 8 H₂O ( 1 ), Mn₂(PO₂NH)₄ · 8 H₂O ( 2 ), Co₂(PO₂NH)₄ · 8 H₂O ( 3 ) and Zn₂(PO₂NH)₄ · 8 H₂O ( 4 ) were obtained as microcrystalline powders by combining aqueous solutions of K₄(PO₂NH)₄ · 4 H₂O and MX₂ · y H₂O (M = Mg, Mn, Co, Zn; X = Cl, NO₃). Single crystals were obtained by crystallization in gelatine gels in U‐tubes or test‐tubes. 2 and 4 were characterized by thermogravimetry and 4 was additionally characterized by temperature dependend in situ powder diffractometry. The structures of 1 , 2 , 3 and 4 were found to be isotypic and were solved by single‐crystal X‐ray methods: P 2₁/c, Z = 2 ( 1 : a = 645.4(2), b = 1050.1(2), c = 1283.3(3) pm, β = 104.66(3)°; 2 : a = 648.7(2), b = 1063.1(2), c = 1310.8(3) pm, β = 103.93(3)°; 3 : a = 643.3(2), b = 1049.0(2), c = 1286.7(3) pm, β = 104.28(3)°; 4 : a = 644.18(5), b = 1049.22(7), c = 1282.43(8) pm, β = 104.122(6)°). The structure is composed of MO₆ octahedra and (PO₂NH)₄^4— anions. The P₄N₄ rings of the (PO₂NH)₄^4— anions exhibit a slightly distorted chair conformation, which is supported by IR data and has been described by torsion angles, Displacement Asymmetry Parameters and Puckering Parameters. Via M²⁺ ions and hydrogen bonds, the tetrametaphosphimate anions are connected forming layers perpendicular to [100]. These layers are connected by hydrogen bonds.     

Residual stress in polyethylene pipes

This paper deals with residual stress in polyethylene (PE) pipes as an important factor that influences their lifetime. Residual hoop stress distribution in a PE pipe was determined using a methodology previously carried out by the authors on polypropylene pipes. Axial residual stress magnitude was determined by comparison of experimental data and finite element modelling. Based on the obtained results, a new simplified methodology for determining the residual hoop stress is proposed. The method needs only one circular specimen made of pipe, but, unlike older methods, provides a more precise estimation of residual hoop stress distribution taking into account its exponential shape. Some older results from literature are recalculated using this method and residual hoop stress of various PE pipe grades and dimensions are then compared. To provide an idea of residual hoop stress influence on lifetime of a pipe, a lifetime estimation is carried out for the examined pipe.