工质对微通道沸腾液膜瞬态变化的影响

本文采用去离子水和无水乙醇两种工质,利用微通道流动沸腾同步测量实验系统,研究了液膜厚度的瞬态变化规律,实验发现流动沸腾形成的初始液膜厚度在毛细数Ca很宽的范围内都遵循Taylor流动原理;液膜形成后,在蒸发和蒸汽流动携带的耦合作用下,厚度迅速减薄直至蒸干;由于水的汽液黏度比小,速度梯度小,剪切作用带来的液膜厚度减少量小,且水的汽化潜热大,吸收相同热量时蒸发量小,导致水的液膜厚度变化斜率较小,通过理论分析提出了沸腾液膜厚度变化的计算模型,计算结果与实验结果的误差小于20%。     

Er_xY_(1-x)Al_3(BO_3)_4晶体的生长和光谱性质

采用助熔剂法生长出了掺杂均匀的Er_xY_(1-X)Al_3(BO_3)_4厘米级优质单晶.测定了晶体的吸收、激发光谱.用Judd_Ofelt理论计算了晶体中Er~(3+)的十一条谱带的振子强度(ρ_(ad)和ρ_(md)以及Er~(3+)的强度参数Q_λ(λ-2、4、6).并由此计算了Er~(3+)不同能级之间跃迁的爱因斯坦自发辐射系数A_r、辐射寿命r、荧光分支比β_3以及积分发射截面Σ.根据这些参数讨论了在EYAB晶体中可能实现激光输出的通道.     

非晶态Fe40Ni38Mo4B18（2826MB）合金粉末的高压压结与磁性研究

 本文研究了非晶态软磁材料Fe₄₀Ni₃₈Mo₄B₁₈（2826MB）合金粉末在高压下加温压结成三维大尺寸产品的可行性，并通过压结样品的复数导磁率在弱交变磁场中的行为，探讨了压结条件对压结样品的软磁性能的影响。结果表明，在本实验所采用的压力范围内，压结温度对压结样品的性能的影响大于压结压力的影响。     

The optical properties of the laser beam passed through a turbulent shear layer

The related fluid dynamic theory, experimental device and some preliminary results of the study of the optical properties of a laser beam passed through a turbulent shear layer are presented. The method of image processing for the determination of the optical density from a interferogram by means of a Microneye Bullet and a Microcomputer is also described.     

Simultaneous measurement of transient stress and flow birefringence in one-sided compression (biaxial extension) of a polymer melt

Summary Investigation of time dependent behaviour of a polystyrene melt is carried out with the aid of a new apparatus for biaxial extension. Use is made of the method of two impinging fluid streams guided by lubricated trumpet shaped metal walls. The flow birefringence is measured in the plane of symmetry and, at the same time, the force is measured which tends to separate the trumpets. The linear stress-optical relation turns out to be valid in this new flow geometry. An accurate value for the stress-optical coefficient can be determined from the relaxation experiments. The stress build-up as calculated from the optical measurements, is compared with the pertinent result of the theory of linear viscoelasticity. For the desired interconversion of dynamic moduli use is made of the approximation by Schwarzl and Struik. The steady state measurements are checked by the results of the non-linear model of Acierno et al.With 16 figures and 2 tables     

q-Stancu算子的保形性及收敛定理

给出了基于q-整数的Stancu算子Ln（·,q）,同时研究了该算子的一些基本性质．首先,利用q-Stancu算子作用于某一函数f（x）以后Ln（f,q;x）与f（x）变号数的关系,得到了该算子的保形性定理．其次,通过精细的不等式放缩,该算子作用于一般的连续函数后收敛于一极限算子,而不像一般算子那样收敛于函数本身,并用光滑模刻画了其收敛速度．     

The mean spherical model in a random external field and the replica method

We provide a quick elementary solution of the mean spherical model in a random external field. This also allows an immediate proof of the self-averaging property of the free energy. We calculate the free energy by means of the replica method, i.e., for any (not necessarily integer) replica numbern, and show that when a phase transition occurs the limits andn 0 are not interchangeable.     

自控液晶光阀组式光刻快门研究

通过理论推导,构建了抗蚀剂的感光特性、光源的光效与曝光量之间的数学模型,为液晶光阀代替穿孔带提供了理论依据.结合液晶光阀的工作原理和光刻快门的控制原理,对液晶光阀组的控制进行了研究并给出了其控制电路图.通过实际光刻试验,自控液晶光阀组光刻快门机构可以完成编码图案的控制,通光控制达到了预计要求,刻出的图案清晰,线条陡直.证明液晶光阀组替代穿孔带用作光刻快门是完全可行的.     

纳米颗粒悬浮液池内泡状沸腾的实验研究

本文对纳米颗粒悬浮液在平壁面上池内沸腾进行了实验研究。实验用的纳米粒子为26 nm的铁粉和13 nm的三氧化二铝纳米粉末,基液为去离子水。分别配成体积浓度为0．1％, 1％和2％的悬浮液。实验结果表明,纳米悬浮颗粒对液体沸腾换热过程的影响会随着纳米颗粒性质,颗粒浓度及热流密度大小的不同而出现不同的效果;加入纳米颗粒后, 对基液沸腾换热的影响存在着两个相反的作用机制,它们分别为:纳米颗粒增强了液体内部的热量迁移能力(热物性的影响)和改变了加热面的表面结构特性(加热面特性的影响)。     

q变形对相干态的相位概率分布特性

通过推广Pegg和Barnett的相位算符和相位态到q变形的双模情况, 应用数值计算 研究了q变形对相干态的相位概率分布特性. 结果表明, q变形对相干态的相位概率分布受到相位参数、q参数和参数│ξ│的调节, 从而反映出不同的量子相干特性.