Measurement of wire diameter by optical diffraction

A combined interference and diffraction pattern, in the form of equidistant interference fringes, resulting from illuminating a vertical metallic wire by a laser beam is analyzed to measure the diameter of four standard wires. The diameters range from 170 to 450 μm. It is found that the error in the diameter measurements increases for small metallic wires and for small distances between the wire and the screen due to scattering effects. The intensity of the incident laser beam was controlled by a pair of sheet polaroids to minimize the scattered radiation. The used technique is highly sensitive, but requires controlled environmental conditions and absence of vibration effects. The expanded uncertainty for k=2 is calculated and found to decrease from U(D)=±1.45 μm for the wire of nominal diameter 170 μm to ±0.57 μm for the diameter 450 μm.     

Heat Kernel and Hardy’s Theorem for Jacobi Transform

In this paper, the authors obtain sharp upper and lower hounds for the heat kernel associated with Jacobi transform, and get some analogues of Hardy‘s Theorem for Jacobi transform by using the sharp estimate of the heat kernel.     

Robust H∞ control for linear Markovian jump systems with unknown nonlinearities

This paper studies the problem of stochastic stability and disturbance attenuation for a class of linear continuous-time uncertain systems with Markovian jumping parameters. The uncertainties are assumed to be nonlinear and state, control and external disturbance dependent. A sufficient condition is provided to solve the above problem. An H_∞ controller is designed such that the resulting closed-loop system is stochastically stable and has a disturbance attenuation γ for all admissible uncertainties. It is shown that the control law is in terms of the solutions of a set of coupled Riccati inequalities. A numerical example is included to demonstrate the potential of the proposed technique.     

置换环上的稳定矩阵

本文证明了置换环上的正则稳定矩阵是幂等矩阵和可逆矩阵的积,进一步证明了置换环上的正则稳定矩阵可以对角化。     

Instrumental neutron activation analysis of mass fractions of toxic metals in plastic

It is very challenging to decompose a plastic product for the purpose of analysis of hazardous elements contained. To circumvent such technical problem, it is imperative that an analyst employ a nondestructive analytical method free of any pretreatments. The analytical results of the concentrations of toxic metals such as Cd and Cr in polypropylene for seven samples at two different levels were obtained using the instrumental neutron activation analysis. This work was intended ultimately to establish certified reference materials (CRMs) of these metals in the polypropylene, traceable to the SI. The uncertainties associated with the analytical procedures were estimated in accordance with the ISO guideline. The results were subsequently validated by a comparison with those for CRM-680 and −681 of the Bureau Communautaire de Reference (BCR), which demonstrated acceptable agreement within their uncertainty ranges.     

价格波动对进出初级产品行业的影响

初级产品生产行业有两大特点：一是其初级投资有较大的不可逆转性，二是其产品价格具有较大的随机性（不确定性）。这两点的同时存在，给进入和退出初级产品行业造成壁垒。     

低场脉冲核磁共振测定二醋酸纤维素丝束中油剂

研究了采用低场脉冲核磁共振(NMR)测定二醋酸纤维素丝束油剂的新方法，给出NMR法测定二醋酸纤维素丝束油荆含量的标准曲线。同时对NMR法测量二醋酸纤维素丝束油荆不确定度进行了评估。结果表明，NMR法具有分析速度快、无污染、无损伤和准确度高的优点，适合于二醋酸纤维素丝束油荆的分析。     

Schedule-an expert-like system for machine scheduling

The construction of an expert-like system for machine scheduling called SCHEDULE is presented. Essential parts of SCHEDULE were developed by students in a laboratory course Operations Research on Microcomputers at the University of Karlsruhe, Germany. SCHEDULE consists of the components data base, knowledge base, inference engine, explanation facility, dialog component, and knowledge acquisition component. The knowledge base contains an algorithm base for solving different types of scheduling problems. To establish the rules of the knowledge base the well-known three-field classification of deterministic machine scheduling problems and the concept of the reduction digraph are exploited. Experiences gained during building and demonstrating SCHEDULE are reported.     

苯部分加氢制环己烯的非晶态Ru-M-B/ZrO2催化剂的表征

采用化学还原法，制备了高活性，高选择性非晶态RU-M-B/ZRO2催化剂，并将其用于催化苯部分加氢制环己烯，在140℃、5.0Mpa氢压下，苯转化40%时，环己烯选择性达到85%左右。环己烯最高收率达到52.1%，用XRD、SEM、BET比表面积测定等手段对摧化剂进行表征，XRD和SEM测试表明，RU-U-B/ZRO2属于非晶态，活性组分高度分散，XRD结果证实，在加氢过程中，非晶分解，RU晶化；温度愈高，RU晶化愈快，催化剂的活性、选择性与RU微晶的粒径有关，RU微晶粒径应控制在5nm左右，BET比表面积测定表明，ZRO2的负载提高了催化剂的比表面积，从而有利于活性组分的高度分散，并可阻止RU微晶的长大，讨论了B和ZRO2对提高选择性的作用。     

溶剂热还原合成Cr2O3纳米管(英)

Cr₂O₃ nanotubes with diameters of 80 nm and lengths of 550 nm were synthesized in a solvothermal reduction system at 180 ℃. The acetyl acetone (AcAc) and ethylene glycol (EG) were used as the chelate agent and the reductant respectively in the system. An intermediate compound-Cr(Ⅲ)(C₅H₇O₂)₃ was formed to force Cr₂O₃to crystallize along one direction.