Thermal stability of shear-induced precursor structures in isotactic polypropylene by rheo-X-ray techniques with couette flow geometry

Combined in situ rheo-SAXS (small-angle X-ray scattering) and -WAXD (wide-angle X-ray diffraction) studies using couette flow geometry were carried out to probe thermal stabilty of shear-induced oriented precursor structure in isotactic polypropylene (iPP) at around its normal melting point (162 °C). Although SAXS results corroborated the emerging consensus about the formation of “long-living” metastable mesomorphic precursor structures in sheared iPP melts, these are the first quantitative measures of the limiting temperature at which no oriented structures survive. At the applied shear, rate = 60 s⁻¹ and duration t_s = 5 s, the oriented iPP structures survived a temperature of 185 °C for 1 h after shear, while no stable structures were detected at and above 195 °C. Following Keller's concepts of chain orientation in flow, it is proposed that the chains with highly oriented high molecular weight fraction are primarily responsible for their stability at high temperatures. Furthermore, the effects of flow condition, specifically the shear temperature, on the distributions of oriented and unoriented crystals were determined from rheo-WAXD results. As expected, at a constant flow intensity (i.e., rate = 30 s⁻¹ and duration, t_s = 5 s), the oriented crystal fraction decreased with the increase in temperature above 155 °C, below which the oriented fraction decreased with the decrease in temperature. As a result, a crystallinty “phase” diagram, i.e., temperature versus crystal fraction ratio, exhibited a peculiar “hourglass” shape, similar to that found in many two-phase polymer–polymer blends. This can be explained by the competition between the oriented and unoriented crystals in the available crystallizable species. Below the shear temperature (155 °C), the unoriented crystals crystallized so rapidly that they overwhelmed the crystallization of the oriented crystals, thus depleting a major portion of the crystallizable species and increasing their contribution in the final total crystalline phase. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3553–3570, 2006     

The application of Hölder exponent to traffic congestion warning

In this paper, we applied multifractal modeling techniques to analyze the traffic data collected from the Beijing Yuquanying. The results indicated that multifractal characteristics obviously exist in the traffic system; the degree of fractality of these traffic data tends to increase as the traffic system becomes congested; the Hölder exponent that measures the local rate of fractality may be used as indicators to predict the presence of the traffic congestion.     

Assessment of filtered gas–solid momentum transfer models via a linear wave propagation speed test

The propagation speeds of linear waves in gas–solid suspensions depend strongly on the solids volume fraction and the wave frequency. The latter is due to gas–solid momentum transfer and allows a simple test on filtered gas–solid momentum transfer models. Such models may predict linear wave propagation speeds different from those obtained with the non-filtered model at wave frequencies higher than the filter frequency, but not at wave frequencies lower than the filter frequency.     

Establishment of hybrid-derived offspring populations in the Ohomopterus ground beetles through unidirectional hybridization

An approach to deduce the mechanism of stabilization of the hybrid-derived populations in the Ohomopterus ground beetles has been made by comparative studies on the phylogenetic trees of the mitochondrial and nuclear DNA. A phylogenetic tree based on the internal transcribed spacer (ITS) of nuclear ribosomal gene roughly reflects the relations of morphological species group, while mitochondrial NADH dehydrogenase subunit 5 (ND5) gene shows a considerable different topology on the tree; there exist several geographically-linked lineages, most of which consist of more than one species. These results suggest that the replacement of mitochondria has occurred widely in the Ohomopterus species. In most cases, hybridization is unidirectional, i.e., the species A (♂) hybridized with another species B (♀) and not vice versa, with accompanied replacement of mitochondria of A by those of B. The results also suggest that partial or complete occupation of the distribution territory by a hybrid-derived morphological species. The morphological appearance of the resultant hybrid-derivatives are recognized as that of the original species A. Emergence of a morphological new species from a hybrid-derived population has been exemplified.     

Formation of long range ordered arrangement of quantum dots with the help of lateral centripetal flow

A simple “chimney” method was used to eliminate the voids in an arrangement of quantum dots sized 2 nm on a solid substrate, which resulted in a large well ordered superlattice of area in the order more than 1 μm². Based on the principle of speeding up the interparticle interaction of nanoparticles to overcome the particle-substrate one, a lateral centripetal force originated from a glass tube acting as a chimney in a simple evaporation device is imposed. This method allows the packing process to be controlled in a mechanical force field, that is, with the same nanogold dispersion different patterns on a substrate—from separate dots to an ordered compact monolayer or even a multilayer structure—could be easily obtained.     

绕圆柱体自由表面磁流体流动和传热的研究

本文对在不同雷诺数下,绕圆柱体的磁流体自由表面流动及传热进行了模拟,分析了磁场对绕流圆柱尾迹和涡分离的影响,获得了两种雷诺数下的电磁力密度、流场和温度场分布。结果表明,磁场不仅影响了流动的形态,而且对湍流有抑制作用,降低了自由表面的更新机制,从而减少了传热能力;在相同的Hartmann数下,相比低雷诺数下的流动换热情况,高雷诺数下的湍流不能被完全抑制,自由表面与尾迹的相互作用也较强,因而自由表面换热也较强。     

Discrete storage processes and their Poisson flow and fluid flow approximations

Consider discrete storage processes that are modulated by environmental processes. Environmental processes cause interruptions in the input and/or output processes of the discrete storage processes. Due to the difficulties encountered in the exact analysis of such discrete storage systems, often Poisson flow and/or fluid flow models with the same modulating environmental processes are proposed as approximations for these systems. The analysis of Poisson flow and fluid flow models is much easier than that of the discrete storage processes. In this paper we give sufficient conditions under which the content of the discrete storage processes can be bounded by the Poisson flow and the fluid flow models. For example, we show that Poisson flow models and the fluid flow models developed by Kosten (and by Anick, Mitra and Sondhi) can be used to bound the performance of infinite (finite) source packetized voice/data communication systems. We also show that a Poisson flow model and the fluid flow model developed by Mitra can be used to bound the buffer content of a two stage automatic transfer line. The potential use of the bounding techniques presented in this paper, of course, transcends well beyond these examples.Supported in part by NSF grant DMS-9308149.     

Minimum concave cost production system: A further generalization of multi-echelon model

We will consider a concave minimization problem associated with a series production system in which raw material is processed inm consecutive facilities. The products at some facility are either sent to the next facility or stocked in the warehouse. The amount of demand for the final products during periodi, i = 1,,n, are known in advance. Our problem is to minimize the sum of processing, holding and backlogging cost, all of which are assumed to be concave.The origin of this model is the classical economic lot size problem of Wagner and Whitin and was extensively studied by Zangwill. This model is very important from the theoretical as well as practical point of view and this is one of the very rare instances in which polynomial time algorithm has been constructed for concave minimization problems.The purpose of this paper is to extend the model further to the situation in which time lag is associated with processing at each facility. We will propose an efficient O(n ⁴ m) algorithm for this class of problems.     

Stochastic flows on a countable set: Convergence in distribution

Consider a sequenceF ₁,F ₂,... of i.i.d. random transformations from a countable setV toV. Such a sequence describes a discrete-time stochastic flow onV, in which the position at timen of a particle that started at sitex isM _n(x), whereM _n =F _n F _n–1 F ₁. We give conditions on the law ofF ₁ for the sequence (M _n) to be tight, and describe the possible limiting law. an example called the block charge model is introduced. The results can be formulated as a statement about the convergence in distribution of products of infinite-dimensional random stochastic matrices. In practical terms, they describe the possible equilibria for random motions of systems of particles on a countable set, without births or deaths, where each site may be occupied by any number of particles, and all particles at a particular site move together.     

Turbulence without strange attractor

It is shown that pipe-flow turbulence consists of transients. The fractal dimensions of the dynamical process are thus all zero. Nevertheless, this is compatible with Grassberger-Procaccia analyses suggesting the existence of a high-dimensional strange attractor. The usefulness of the Grassberger-Procaccia method to detect the aging of transients is demonstrated.