数值模拟激光加载L_2铝板材高速成形瞬态响应

采用ABAQUS有限元仿真软件对激光加载L2铝板材高速成形进行数值模拟,研究了单脉冲激光冲击下成形的瞬态响应过程,获得了激光加载冲击成形过程中位移、速度、应变及应变率等特征量的变化特点.模拟表明,冲击后靶材中心区域发生明显塑性变形,变形截面呈锥形.高速成形过程中,金属板材首先发生振荡幅度非常大的快速弹性变形,其后进入减幅振荡直至静态,激光冲击成形时间在毫秒量级.板材不同节点的位移变化趋势相同,靠近中心区域位移大,边界区域位移小.成形中板材的中心区域速度最大达3 700m/s,变形过程前2μs内应变率急剧变化,最大达104~105 s-1量级.     

Characterization of transient cavitation activity during sonochemical modification of magnesium particles

Investigation of the cavitation activity during ultrasonic treatment of magnesium particles during nanostructuring has been performed. Cavitation activity is recorded in the continuous mode after switching the ultrasound on with the use of ICA-5DM cavitometer. It has been demonstrated that this characteristic of the cavitation zone may be varied in a wide range of constant output parameters of the generator. The speed and nature of the cavitation activity alteration depended on the concentration of Mg particles in the suspension and the properties of the medium in which the sonochemical treatment has been performed. Three stages of the cavitation area evolution can be distinguished: 1 – the initial increase in cavitation activity, 2 – reaching a maximum with a subsequent decrease, and 3 – reaching the plateau (or the repeated cycles with feedback loops of enlargement/reduction of the cavitation activity).The ultrasonically treated magnesium particles have been characterized by scanning electron microscopy, X-ray diffraction analysis and thermal analysis. Depending on the nature of the dispersed medium the particles can be characterized by the presence of magnesium hydroxide (brucite) and magnesium hydride. It is possible to reach the incorporation of magnesium hydride in the magnesium hydroxide/magnesium matrix by varying the conditions of ultrasonic treatment (duration of treatment, amplitude, dispersed medium etc.). The influence of the magnesium reactivity is also confirmed by the measurements of cavitation activity in organic dispersed media (ethanol, ethylene glycol) and their aqueous mixtures.     

Temporal reflectance from a light pulse irradiated medium embedded with highly scattering cores

This paper presents a new approach to utilize ultrashort pulsed laser for optical diagnostics with numerical simulations. The method is based on the use of ultrafast pulses with a pulsewidth selected according to the probed medium's radiative property and/or size. Our previous work in nonhomogeneous media has shown that the resulting time-resolved reflectance signal will have a unique characteristic: it will show a direct correlation of ballistic photon travel time and interface location, which is in between different layers or nonhomogeneous regions. The premise is based on utilizing the medium's structural information carried by the ballistic and snake photons without being masked by the diffuse photons. In this study, the space-time correlation is further explored in the case of minimally scattered photons from a large scattering coefficient core region embedded within a less-scattering medium. Time-resolved reflectance signals of the single scattering core and multiple scattering cores within a three-dimensional medium demonstrate the concept and illustrate the additional effect due to the scattered photons from the core region. A unique temporal signal profile's correlation at various detector positions with respect to the scattering core is explained in detail. The result has important implications. This approach will lead to a much simpler and more precise determination of the probed medium's composition or structure. Due to the large computational requirement to obtain the physical details of the light pulse propagation inside highly scattering multi-dimensional media, the reverse Monte-Carlo method is used. The potential applications of the method include non-destructive diagnostics, optical imaging, and remote sensing of underwater objects.     

Photo-degradation of imidazolium ionic liquids

Degradation of imidazolium ionic liquid, [bmim⁺][TFSA⁻] and iodide solution of [bmim⁺][TFSA⁻] by UV-laser irradiation has been studied through ground-state absorption and transient absorption spectroscopy. We found that excited state [bmim⁺]* undergoes degradation efficiently.     

Transient Characteristics of the Yield Surface of Electrorheological Clutch

The characteristic of transient yield surface in electrorheological clutch has been studied. It shows that the characteristics of clutch are dependent on the parameterβ, which is in the yield stress formula of ERF, when extra electric field was applied suddenly. In the case ofβ>2, the yield surface generates from the inner cylinder. In the case ofβ<2, the yield surface generates from the outer cylinder. The direct numerical results deriving from the Crank-Nicoson finite difference method with the regulation parameter model are also presented.     

PHYSICAL STRUCTURE AND PHASE PROPERTIES OF AQUEOUS SYSTEMS OF LIPIDS FROM RYE AND TRITICALE IN RELATION TO WHEAT LIPIDS

In connection with studies of technical functionality of lipids in cereals, the aqueous systems of lipids from rye and tri-ticale flour are described and compared to different wheat culti-vars. Rye lipids give a lamellar liquid-crystalline phase with very small ordered regions, and this phase is continuously changed into an L2-phase with increasing water content. Triticale lipids exhibit phase equilibria in between lipids of wheat and of rye. Evidence is given for a significant role of the lamellar liquid--crystalline phase with regard to technical functionality when the cereal flour is worked in water to give a dough.     

Palladium-catalyzed ortho-C(sp2)H bromination of benzaldehydes via a monodentate transient directing group strategy

A facile and efficient monodentate transient directing group strategy was developed to enable the palladium-catalyzed ortho-C(sp²)H bromination of benzaldehydes. A broad scope of benzaldehydes were transformed into the desired products by employing 2-amino-5-chlorobenzotrifluoride as a monodentate transient directing group, demonstrating good functional group tolerance. Mild reaction conditions and no requirement for a silver salt are also features of this strategy.     

Reaction Kinetics between Thiobases and Singlet Oxygen Studied by Direct Detection of the 1O2 Luminescence Decay

Thiobase derivatives have received important investigations due to their wide usage as phototherapeutic agents and their potential carcinogenic side effects as immunosuppressants. The substitution of oxygen atom by the sulfur atom makes the ultraviolet absorption of thiobases redshifted and absorbs UVA light (>300 nm), resulting in unusual high quantum yield of triplet state to generate the singlet oxygen (¹O₂) through photosensitization. As a type of reactive oxygen species, ¹O₂ is highly reactive toward thiobases. Herein, we report the measurements of reaction rate constants between di erent thiobases and ¹O₂ in different solvents through the direct detection of ¹O₂ luminescence decay kinetics at 1270 nm. The rate constants of thiouracils with ¹O₂ are five times smaller than that of thioguanine with ¹O₂, which suggests that thiopurines are more reactive than thiopyrimidines and thus less suitable to be a photosensitive drug on the application of photodynamic therapy. Additionally, the rate constants of thiobases and ¹O₂ were found to be obviously influenced by the solvent polarity. With the increase of solvent polarity, the rate constants of thiobases and ¹O₂ decrease.     

脉冲电势调制型电化学气体传感器

根据暂态电化学原理 ,使用微电极并融合计算机控制的快速电势调制技术和数据采集、处理功能 ,提出并建立了一类全新的集信号提取、处理与结果显示等功能于一体的“脉冲电势调制型气体传感器” .在优化传感器性能及其新的功能开发和集成方面取得了重要进展 ,是一类为常规电化学气体传感器无法比拟而有发展前景的暂态电化学多组份气体传感器 .