Optical time-resolved study of the excitation dynamics*

Transient behaviour of the excited states originated from the neutral and the charged species is discussed using data from time-resolved experiments. Complex transient characteristics obtained for the slightly charged poly-(bithiophene) film during electrochemical doping were explained in terms of sequential molar fraction changes of the neutral species, the radical cation and the π-dimerized radical cations. Femtosecond transient absorption measurement carried out in time range of 0-4 ns for a two-photon excited dye reveals a multi-exponent decay with well separated relaxation times and the distinct relaxation mechanisms. At high irradiance and a sufficient fluence, the multi-photon excitation processes affect the subpicosecond response and lead to formation of the photo-products.     

Wavelength selection of bidirectional laser transmission based on Monte Carlo method

The laser detection technology in uncertain and dynamic environments is of utmost importance in many fields. A model of transient radiative transfer of bidirectional path laser based on Monte Carlo method is developed to investigate the optimum wavelength of active detector at complex atmospheric conditions. The radiative parameters of atmosphere are calculated by HITRAN database and Mie theory at several typical atmospheric conditions including the standard atmosphere, urban aerosol, and radiation fog. Transmission characteristics for five spectral bands at the above atmospheric conditions are calculated by this model. The optimal transmission ability occurred in bands 0.2–0.5, 1.4–1.6, and 0.75–1.25 μm on the condition of standard atmosphere, urban aerosol, and radiation fog, respectively. All results provide effective reference and basic support for choosing the optimal spectral band for active detection.     

�й�ITER��̬��ֳ��ʵ�����ģ���һ��˲̬�ȷ���

利用通用有限元程序ANSYS对中国氦冷固态氚增殖剂实验包层模块(CH HCSB TBM)第一壁进行了稳态热分析。结果表明,第一壁铍保护板和RAFM钢的最高温度符合热工安全设计要求。对第一壁表面热流密度随时间变化的瞬态情况进行了分析,给出了随时间变化的结果。对第一壁两种典型的事故情形开展了初步分析,并对分析结果和事故影响进行了相应讨论。     

基于Matlab/Simulink的电压型超导储能功率调节控制仿真

本文首先对电压型超导储能（Voltage-Superconducting-Magnet-Energy-Storage,简称VSMES）功率调节系统（Power-Conditioning-System,简称PCS）的原理进行介绍,并运用Matlab/Simulink仿真分析软件,针对三相电压型超导储能功率调节系统的控制过...     

使用超声研究关节软骨的深度依赖瞬态膨胀行为

关节软骨是覆盖关节表面的一层承载生物重量的组织，关节软骨在正常状态下，软骨蛋白多糖的弹性和胶原纤维的张力保持平衡。这种平衡的微小变化会引起关节软骨的退化。量化关节软骨，特别是在表层区域的膨胀影响，可以表征骨关节炎的退化变化。本文的主要目的是使用一种新的实时超声膨胀测量系统来研究在改变浸泡关节软骨的盐水浓度，以及改用胰岛素溶液时的关节软骨的深度依赖瞬态膨胀行为。     

用传输线和时域有限差分法计算电缆X射线响应

 介绍了时域传输线和时域有限差分两种计算电缆X射线瞬态响应的方法,并利用电缆芯线总电荷以及介质层的电荷分布,结合实验结果,分别给出了时域传输线模型中的电流源和时域有限差分模型中电流密度的计算方法。作为例子,在60 keV单能X射线垂直于电缆轴向辐照的条件下,采用两种方法计算了电缆两端接匹配负载时负载上的电流响应;采用传输线方法计算了不同能量X射线辐照电缆时的芯线负载电流响应。计算结果表明,两种方法计算的电缆X射线瞬态响应是一致的;电缆介质层中存在静电场;X射线能量不同时,电缆芯线负载电流存在最大值。计算中,电缆与X射线的作用采用蒙特卡罗方法计算。     

Tunable subnanosecond laser pulse generation using an active mirror concept

We report (theory, experimental check) an improved approach for generation of a tunable, subnanosecond pulse (0.1–0.4 ns), based on a single pulsation (“spike”) separation from the transient oscillations in a dye laser with active mirror (AMIR). A pumping by 20–50 ns pulses from Q-switched Nd:YAG laser is considered. The separation is in original, two-spectral selective channels cavity, where the forced by AMIR quenched generation at one of the wavelength stops initially started spiking generation at the other wavelength after the first spike development. The AMIR quickly starts the quenching generation at a precisely controlled moment and with necessary intensity thus assuring the desired separation. An advantage is a high reproducibility of the separation for high (~250%) pump power fluctuations combined with tuning in large range (~20 nm). To obtain such an operation we form ~1 ns leading front pump pulse by electrooptical temporal cutting of the input pump pulse and use an optical delay line. This increases also a few times the power in the separated spike (to be ~100 kW). Our approach widens the combinations of lasers for effective applications of spike separation technique (dye lasers excited by Q-switched solid-state or Cu-vapor lasers).     

Transient stationary waves and angular momentum

We report new transient stationary spherical waves generated by the time evolution of wave functions with angular momentum. In the study the 3D problem of the sudden release of a particle which initially was inside a spherical trap, the exact solution for the particle's time evolution is described by expected traveling incoming and outgoing spherical waves. However, unexpected transient stationary spherical waves are also present. The traveling waves have amplitudes describing diffraction in time, in a way similar to the optical diffraction by a single slit. In striking contrast with the similar 1D problem, the angular momentum generates unexpected transient stationary spherical waves which have their main contribution at points inside the sphere but only for very short times.     

脉冲功率传输线磁绝缘的建立与特性分析

 分析了脉冲功率传输线建立磁绝缘的暂态过程,对暂态过程中传输线的击穿与磁绝缘关系、电子的分布规律及其与建立磁绝缘的关系进行了阐述。分析了磁绝缘传输线电极间的电子分布改变传输线工作阻抗值的现象,给出了传输线稳态工作阻抗的求解方法和用稳态工作阻抗计算传输线暂态工作阻抗的方法。研究了截面尺寸变化时传输线中电子的分布和电磁波传播的折反射情况。结果表明:传输线在建立磁绝缘的过程中损失电子是必然的,损失电子是建立磁绝缘的必要条件。截面半径沿轴向变化时,其工作特性与极间距的变化有关。极间距增大时,后半段的电子电流增大,使其工作阻抗增大并与前半段相等,因而在尺寸变化处不产生反射波。极间距减小时,由于后半段提前产生损失电子,因而尺寸变化处产生反射波。