Novelties of solid-liquid phase transfer catalysed synthesis of p-toluenesulfonyl fluoride from p-toluenesulfonyl chloride

Organic sulfonyl fluorides are of interest owing to their insecticidal, germicidal and enzyme inhibitory properties. In the current work, synthesis of p-toluenesufonyl fluoride was accomplished by reacting p-toluenesulfonyl chloride with solid potassium fluoride using PEG-400 as a catalyst under solid-liquid phase transfer catalysis (S-L PTC) at 30 °C. p-Toluenesulfonyl fluoride is used as peroxygen bleach activator. It also finds use in the treatment of Alzheimer's disease. The mechanism is based on homogeneous solubilization of solid. PEG forms a complex with metal cation which associates with the nucleophile and it participates in SN₂ type reactions. The reaction is intrinsically kinetically controlled. A complete theoretical analysis is done to determine both the rate constant and equilibrium constant from the same set of data. The activation energy and Gibbs free energy are also calculated.     

Effect of the polyethylene confinement and topology on its crystallisation within semicrystalline ABC triblock copolymers

The isothermal crystallisation behaviour of the polyethylene block within polystyrene-b-polyethylene-b-poly(ε-caprolactone), SEC, triblock copolymers was studied by differential scanning calorimetry. The morphology was observed by transmission electron microscopy. Melting scans after isothermal crystallisation performed at different times were employed to determine the crystallisation kinetics one step at a time (“isothermal step crystallisation”). Double melting endotherms were observed after isothermal crystallisation and they were interpreted as a result of the melting of two lamellar populations. These arise from the intrinsic short chain branching distribution within the hydrogenated polybutadiene chains that conform the PE blocks and from their location within the copolymer microdomains. The Hoffman-Weeks procedure failed to yield reasonable values for the equilibrium melting point of the PE blocks as a result of the distribution of linear sequences present in these blocks. The results indicate that as the degree of PE confinement increases the Avrami index decreases to values that are even lower than 1, a result that can be explained by the nature of the homogeneous nucleation process that is in between sporadic and instantaneous.     

Thermodynamic quantities for the interaction of SO 4 2− with H+ and Na+ in aqueous solution from 150 to 320°C

The aqueous reactions,

Analysis of Equilibrium and Kinetics of Chromium-Fluoride Complexation from Spectroscopic Data via Chemometrics Methods

IntroductionStudies on reversible kinetic systems are consi-dered as a hotspot of chemical and biochemical kineticresearches[1,2]. Of late, some researches have been fo-cused on the simultaneous optimization of the obverseand reverse rate constants[3,4].H…     

从溶胀平衡研究玻璃态高聚物的凝聚缠结网络

在13~15℃室温条件下对聚苯乙烯(PS)颗粒在二氧六环/水混合溶剂中的溶胀情况进行目视观察,可以看到,当减小混合溶剂二氧六环/水中的水含量时,PS颗粒从玻璃态到溶胀的玻璃态、溶胀的高弹态、流体态的转变,与PS颗粒升温时从玻璃态到高弹态、流体态的转变相对应.选定混合溶剂二氧六环/水(水6·8wt%)对一个单分散PS试样(Mw=1·68×105)在30℃进行分相平衡和溶胀平衡的测定.分相平衡是先将PS/二氧六环/水(混合溶剂水含量6·8wt%)体系加热到130℃使PS溶解成一均相溶液,然后在冷却过程中分相,在30℃达分相平衡(30天)时,浓相高分子体积浓度p″=0·304,稀相几乎为纯溶剂.从Flory-Huggins相平衡理论得出此体系的高分子-溶剂相互作用参数χ=0·63.本工作使用的单分散PS试样在选定的混合溶剂,即二氧六环/水(水6·8wt%)中,30℃时不能溶解只能溶胀,单分散PS颗粒淬冷试样(密度ρp=1·0451g/mL)到达溶胀平衡(80天)时浓相高分子体积浓度p″=0·308.而此淬冷试样经在80℃热处理100h后的老化试样(ρp=1·0470g/mL)达溶胀平衡(70天)时p″=0·312.从溶胀过程中浓相体积变化曲线可知试样经在80℃热处理过程中凝聚网络趋向于更均一,更接近热处理温度下的平衡态,试样密度增大,网络产生了新的链间凝聚,物理交联密度增大(凝聚点间分子量减小).从溶胀平衡理论并取χ=0·63(分相平衡)可得到淬冷试样的物理交联点间分子量Mc=11·6×104,老化试样的物理交联点间分子量Mc=6·9×104.实验结果说明溶胀过程及溶胀平衡的测定可以反映玻璃态高聚物中的凝聚网络结构的细节,而且非常敏感.     

疏水相互作用对阳离子聚电解质与染料键合的影响

用平衡渗析法研究了阳离子聚电解质PAm·MG 和P(St-Am·MG)与甲基橙(MO)及P(St-Am·MG)与MO的同系物乙基橙(EO)、橙武Ⅳ(O-Ⅳ)在25、35、45和55 ℃下相互作用的热力学. 由K1otz方程, 求得键合常数K_1和热力学参数ΔG、ΔH及ΔS. 含疏水基的P(St-Am·MG)与MO的键合能力比不含疏水基的PAm·MG 强. P(St-Am·MG)与不同染料作用时, 键合程度为O-Ⅳ>EO>MO, 即染料的疏水性越强, 与高聚物的作用程度越大.键合体系加入脲或甲醇, 疏水相互作用受到破坏, 导致高聚物与染料之间的键合受到削弱.     

A stable carbonyl-pyrazine-metal(0) complex: Synthesis and characterization of cis-tetracarbonylpyrazinetrimethylphosphitetungsten(0)

Pentacarbonylpyrazinetungsten(0), (CO)₅W(pyz), is not stable in solution in polar solvents such as acetone or dichloromethane and undergoes conversion to a bimetallic complex, (CO)₅W(pyz)W(CO)₅ plus free pyrazine. These three species exist at equilibrium. Using the quantitative ¹H NMR spectroscopy, the equilibrium constant could be determined to be K_eq = (5.9 ± 0.8) × 10⁻² at 25 °C. Introducing a second pyrazine ligand into the molecule does not stabilize the complex, as cis-W(CO)₄(pyz)₂ was found to be less stable than W(CO)₅(pyz) and, therefore, could not be isolated. However, introducing trimethylphosphite as a donor ligand into the complex leads to the stabilization of the carbonyl-pyrazine-metal(0) complexes, as shown by the synthesis of cis-W(CO)₄[P(OCH₃)₃](pyz). This complex could be isolated from the reaction of the photogenerated W(CO)₄[P(OCH₃)₃](tetrahydrofuran) with trimethylphosphite upon mixing for 2 h at 10 °C in tetrahydrofuran and characterized by elemental analysis, IR, MS, ¹H, ¹³C, and ³¹P NMR spectroscopy.     

Equilibrium,pseudoequilibrium and sliding-mode heteroclinic orbit in a Filippov-type plant disease model

Plant diseases have caused tremendous crop losses and have massive impacts on food security and environment. Modeling the spread of plant diseases and understanding the dynamics of the resulting plant disease models may provide practical insights on designing effective control measures. In this paper, by incorporating cultural strategies and economic threshold policy, we present a Filippov-type plant disease model. The resulting model has state dependent discontinuous right-hand side and thus non-smooth analysis and generalized Lyapunov approach are employed for model analysis. We show that the model exhibits the phenomena of stable equilibrium, unstable pseudoequilibrium as well as sliding-mode heteroclinic orbit. Biological implications of our results in implementing control strategies for plant diseases are also discussed.     

An improved cellular automaton model with the consideration of a multi-point tollbooth

Based on the classical Nagel–Schreckenberg model, we in this paper propose an improved cellular automaton (CA) model to study the influences of a multi-point tollbooth on traffic flow. The numerical results show that the multi-point tollbooth can be looked at as a bottleneck and that it can improve the road capacity compared with other tolling stations, which shows that the proposed model is more effective than other traffic flow models. In addition, the results can help readers to better understand the effects of a multi-point tollbooth on traffic flow and help traffic engineers to reasonably design the tolling station.