Synthesis of (+)-zeylenone from shikimic acid

Starting from shikimic acid, the total synthesis of zeylenone was studied. The product was proved to be the (+)antipode of zeylenone through analysis and comparison of their respective spectra (including NMR, MS, IR and CD) and optical data. The absolute configuration of the natural product was thus determined to be (1S,2S,3R).     

Topological effect on MO energies,IV. The total π-electron energy ofS- andT-isomers

A novel general property of theS- andT-isomers (a concept which has been introduced and elaborated elsewhere^{1, 2}) of alternant hydrocarbons is demonstrated, namely that due to the HMO total -electron energy theS-isomer should always be more stable than theT-isomer. Some other classes of conjugated isomers are also constructed, for which similar inequalities are derived.

---

Topologischer Effekt bei MO-Energien, 4. Mitt.: Die -Elektronen-Gesamtenergie vonS- undT-Isomeren

Zusammenfassung Es wird allgemein gezeigt, daß bei einemS-T-Isomerenpaar (beschrieben in^{1, 2}) eines alternierenden Kohlenwasserstoffes infolge der HMO -Elektronen-Gesamtenergie dasS-Isomere stets stabiler sein sollte als dasT-Isomere. Weitere Klassen konjugierter Isomere werden konstruiert und ähnliche Ungleichungen angegeben.

     

Quo Vadis total reflection X-ray fluorescence?

The multielement trace analytical method ‘total reflection X-ray fluorescence’ (TXRF) has become a successfully established method in the semiconductor industry, particularly, in the ultra trace element analysis of silicon wafer surfaces. TXRF applications can fulfill general industrial requirements on daily routine of monitoring wafer cleanliness up to 300 mm diameter under cleanroom conditions. Nowadays, TXRF and hyphenated TXRF methods such as ‘vapor phase decomposition (VPD)-TXRF’, i.e. TXRF with a preceding surface and acid digestion and preconcentration procedure, are automated routine techniques (‘wafer surface preparation system’, WSPS). A linear range from 10⁸ to 10¹⁴ [atoms/cm²] for some elements is regularly controlled. Instrument uptime is higher than 90%. The method is not tedious and can automatically be operated for 24 h/7 days. Elements such as S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Br, Sn, Sb, Ba and Pb are included in the software for standard peak search. The detection limits of recovered elements are between 1×10¹¹ and 1×10⁷ [atoms/cm²] depending upon X-ray excitation energy and the element of interest. For the determination of low Z elements, i.e. Na, Al and Mg, TXRF has also been extended but its implementation for routine analysis needs further research. At present, VPD-TXRF determination of light elements is viable in a range of 10⁹ [atoms/cm²]. Novel detectors such as silicon drift detectors (SDD) with an active area of 5 mm², 10 mm² or 20 mm², respectively, and multi-array detectors forming up to 70 mm² are commercially available. The first SDD with 100 mm² (!) area and integrated backside FET is working under laboratory conditions. Applications of and comparison with ICP-MS, HR-ICP-MS and SR-TXRF, an extension of TXRF capabilities with an extremely powerful energy source, are also reported.     

The American (USA) perspective six years after implementation of CLIA'88 (Federal) regulations

 On September 1, 1992 all testing sites in the United States were required to comply with the Clinical Laboratory Improvement Amendments of 1988 (CLIA'88). These regulations, based on both total quality management (TQM) and continuous quality improvement (CQI) principles, reshaped the environment for more than 90% of laboratories. CLIA'88 represented a revolutionary change by imposing universal, uniform regulations based on test complexity for all sites examining materials derived from the human body for the purpose of providing information for the diagnosis, prevention, or treatment of disease. CLIA'88 specifies minimum requirements for personnel, quality control, and proficiency testing (PT). In addition, laboratories are required to follow manufacturers' directions and comply with other specified good laboratory practices. PT is mandated for most of the frequently run analyses and quality assurance requirements integrate the principles of CQI as well as TQM into the regulatory process. Biannual inspection is integral to CLIA'88, however, laboratories can choose other federally approved ("deemed") professional organizations, such as the Commission on Office Laboratory Accreditation, the College of American Pathologists, or the Joint Commission on Accreditation of Healthcare Organization, having standards that meet or exceed those of CLIA'88. CLIA'88 has still not been finalized. This article discusses the impact and changes since CLIA's implementation in 1992. Received: 5 October 1998 · Accepted: 20 October 1998     

An iterative acetylene-epoxide coupling strategy for the total synthesis of longimicin C

Longimicin C, a naturally occurring annonaceous acetogenin possessing a C₂-symmetrical bis-THF moiety and a short hydrocarbon chain between its THF-containing region and a terminal γ-lactone, was synthesized for the first time. The total synthesis was successfully achieved by an iterative acetylene-epoxide coupling strategy. d-Mannitol was used to establish the bis-THF-containing segment, in which the additional stereochemistries were introduced by Sharpless dihydroxylations and intramolecular Williamson etherifications. Regioselective epoxide-openings by the appropriate terminal acetylenes allowed coupling and elaboration of all four fragments including the introduction of three essential hydroxyls into the proper sites of the target skeleton.     

细胞呼吸爆发的微量量热学研究

The heat production of Wistar rat polymorphonuclear leukocytes (PMN) was measured by an LKB 2277 Thermal Activity Monitor. When PMN were activited with phorbol-12-myristate13-acetate (PMA), the respiratory burst was recorded by greatly incr eased heat production. Experiment was also carred out in the present of the inhibitor, Total Flavonoids of Lycium Barbarum L. (TFL). The respiratory burst heat production peak was disappeared, but the heat production curve was higher than that of PMA because TFL increased the metabolic activities of PMN.     

Comparative evaluation of Fe(III) reducing power-based antioxidant capacity assays in the presence of phenanthroline, batho-phenanthroline, tripyridyltriazine (FRAP), and ferricyanide reagents

The chemical diversity of antioxidants in complex matrices such as plant extracts makes it difficult to separate and quantify antioxidants from these solutions. Therefore it is desirable to establish methods that can measure the total antioxidant capacity (TAC) levels directly from plant extracts. Iron(III)-based TAC assays, especially the most widely used FRAP (ferric-reducing antioxidant power), play an important role in this regard. However, many problems have been reported in the application of the FRAP assay, the most serious one being the incomplete oxidation of a number of antioxidants during the time protocol of the assay. Thus, six different ferric ion-based total antioxidant capacity (TAC) assays have been comparatively tested, modified, and improved so as to obtain more sensitive and precise results for complex mixtures, namely: 1,10-phenanthroline (o-phen) method (with incubation), batho-phenanthroline method (with incubation), original FRAP method, modified FRAP method (with incubation), original ferricyanide method, and modified ferricyanide method (with incubation). Two new assays in this regard (i.e., o-phen and batho-phen) have been established, and the existing assays (FRAP and ferricyanide) have been modified so as to let the oxidation reactions of antioxidants reach completion. The molar absorptivity for a variety of antioxidants was highest for modified FRAP, batho-phen, and original FRAP methods. The absorption maximum wavelength shifted batochromically to a higher extent for modified ferricyanide, FRAP, and batho-phen procedures, decreasing the possibility of interferences due to organics absorbing in the near-UV range of the visible spectrum where most antioxidant assays are performed. The linear concentration ranges were shown to be further extended and linear correlation coefficients improved with respect to the most widely used ferric-based assay, FRAP. Of the six assays tested and developed, only the modified ferricyanide procedure gave high intercept values and low addivitity of TAC values of constituents in complex mixtures, requiring further attention of method optimization. Thus, it was shown that the most widely used FRAP could be effectively modified, and o-phen, batho-phen, and ferricyanide methods constitute cheaper alternatives to FRAP under certain conditions, with partly improved molar absorptivity (and thus sensitivity) for antioxidants, lower intercept values (and higher precision), broader linear range (and higher flexibility), and better additivity of TAC values of antioxidant constituents in mixtures.     

Degradation-fragmentation of marine plastic waste and their environmental implications: A critical review

This review critically evaluates the plastic accumulation challenges and their environmental (primarily) and human (secondarily) impacts. It also emphasizes on their degradation and fragmentation phenomena under marine conditions. In addition, it takes into account the leachability of the various chemical substances (additives) embedded in plastic products to improve their polymeric properties and extend their life. Regardless of their effectiveness in enhancing the polymeric function of plastic products, these additives can potentially contaminate air, soil, food, and water. Several findings have shown that, regardless of their types and sizes, plastics can be degraded and/or fragmented under marine conditions. Therefore, the estimation of fragmentation and degradation rates via a reliable developed model is required to better understand the marine environmental status. The main parameter, which is responsible for initiating the fragmentation of plastics, is sunlight/UV radiation. Yet, UV- radiation alone is not enough to fragment some plastic polymer types under marine conditions, additional factors are needed such as mechanical abrasion. It should be also mentioned that most current studies on plastic degradation and fragmentation centered on the primary stages of degradation. Thus, further studies are needed to better understand these phenomena and to identify their fate and environmental effects.     

Kinetics of epidermal growth factor/receptor binding on cells measured by total internal reflection/fluorescence recovery after photobleaching

Total internal reflection fluorescence (TIRF) microscopy is used to measure the dissociation kinetic rate of fluorescein-labeled epidermal growth factor from its specific receptors on the surface of intact but mildly fixed A431 human epidermoid cells in culture. Prior applications of TIRF microscopy have been limited to nonreceptor binding or to model membrane systems. The evanescent field excites fluorescence selectively at the surface of the cell proximal to the coverslip. Prismless epiillumination TIR is employed to avoid space limitations and is achieved by passing the excitation laser beam through a high (1.4)-aperture objective so that the light is incident at the glass/water interface beyond the critical angle. Long-term focus is maintained by a special feedback system. Of the possible effects that can influence the time course of the postbleach fluorescence recoveries—the EGF/receptor dissociation ratek ₂, the bulk solution diffusion rate of EGF, and the cell surface motion of the receptors—we infer that the dissociation ratek ₂ dominates. Several fitting schemes are compared and indicate the presence of a multiplicity of values fork ₂, ranging from about 0.05 to 0.004 s^–1, with an average value of about 0.012 s^–1. These results compare well with values previously obtained by radiolabel/washing techniques. The significance of the results in terms of kinetic models and the advantages of the TIRF technique for these sorts of measurements are discussed.     

Element determination in medieval soil samples by total reflection X-ray fluorescence analysis

An aqua regia extraction procedure for heavy metals in soils optimised for total reflection X-ray fluorescence analysis is presented. The procedure is applied to 92 soil samples of medieval layers from the city area of Dortmund. Sixteen elements (P, S, K, Ca, Ti, Cr, Mn, Fe, Ni, Cu, Zn, Rb, Sr, Ag, Sn, and Pb) were used to characterise 17 sample sites. The results are projected onto the medieval urban structure of Dortmund. Two sites loaded with non-ferrous heavy metal could be detected and correlated with archaeological data. The efficiency and repeatability of the proposed extraction procedure is discussed.