Strength of cylinder joint adhesively bonded by coupling

Summary A method of joining two metal cylindrical shafts with adhesive coupling is proposed. Two cylindrical shafts with the same diameter are connected by bonding through a cylindrical coupling with epoxy resin. The strength of the shaft joint under tensile loading and torsional loading is investigated analytically and experimentally. The stress and strain distributions of the shaft joint is analyzed by the finite element method. The analyzed strain distributions in the joint are compared with experimental values. The joint strength is predicted by applying the strength laws of shafts, coupling, adhesive layer and adhesive interface between shaft and adhesive coupling. The effects of the coupling dimension on the joint strength are examined. It is shown that the adhesive shaft joint can transfer the load by which the cylindrical shafts are plastically deformed.This paper was refined by the author, K. Ikegami, during statying at Technische Universität München under the support of Deutscher Akademischer Austauschdients. The author is grateful to Professor Lippmann of Technische Universität München who is the host professor of the support.     

Stability of bars made of linear elastic materials with voids

Summary Dynamic stability of an elastic bar with voids is considered. Using the Lyapunov approach some new sufficient stability conditions are obtained and explicit expressions for the critical load are derived.     

Identification of nonstationary axisymmetric load distributed along a cylindrical shell

The paper outlines a procedure to identify the space-and time-dependent external nonstationary load acting on a closed circular cylindrical shell of medium thickness. Time-dependent deflections at several points of the shell are used as input data to solve the inverse problem. Examples of numerical identification of various nonstationary loads, including moving ones are presented. The relationship between the external load and the stress-strain state of the shell is described by the Volterra equation of the first kind. The identification problem is solved using Tikhonov's regularization method and Apartsin's h-regularization method __________ Translated from Prikladnaya Mekhanika, Vol. 44, No. 7, pp. 91–100, July 2008.     

Antiplane time-harmonic green’s functions for a circular inhomogeneity with an imperfect interface

Two-dimensional antiplane time-harmonic Green’s functions for a circular inhomogeneity with an imperfect interface are derived. Here the linear spring model with vanishing thickness is employed to characterize the imperfect interface. Explicit expressions for the displacement and the stress fields induced by time-harmonic antiplane line forces located both in the unbounded matrix and in the circular inhomogeneity are presented. When the circular frequency approaches zero, our results reduce to those for the static case. Numerical results are presented to show the influence of the frequency and the imperfection of the interface on the stress and displacement fields.     

Relationships between characteristics in periodic Poisson queues

We study single server periodic queues in the day equilibrium conditions. The following characteristics of interest are considered at time of dayt: V^p(t)-the work load, L^p(t)-the number of customers and u^p(t)-the departure rate. We give relationships between E[V^p(t)], E[L^p(t)] and u^p(t). We also prove that E[V^p(t)] < and E[L^p(t)] < provided the second moment of the service time is finite.     

划痕试验法对特殊薄膜系结合力的检测与评价

简要介绍了划痕试验法测量表面薄膜与基体结合力的测试原理和实验方法，讨论了影响临界载荷Lc测量值准确性的主要因素，通过对薄膜系的分类以及大量实际测量数据的总结和分析，认为被测薄膜以及基体的物理化学特性对临界载荷的测量具有重要的影响，单纯从声发射信号的变化来确定临界载荷的方法有可能存在较大误差，分析和讨论了某些特殊薄膜系的声发射信号与其实际临界载荷值之间存在较大偏差的现象和原因，并提出了针对不同膜系，合理利用声发射曲线，摩擦力斜率以及显微观测来正确判定临界载荷的必要性。     

GEOENVIRONMENTAL CHARACTERS OF YELLOW (HUANGHE) RIVER SUSPENDED LOAD

Three important characters of the suspended load of the Yellow (Huanghe) River are discussed, i.e. its temporal fluctuation as a function of solar activity, its uneven spatial distribution along the main course and the inevitability of these phenomena as a natural earth process rather than a result of disturbed ecological system caused by human activity. Implications of this understanding with regard to the control of the Yellow River are also discussed.     

Radial sample load distribution under overload conditions: Analytical scale columns

The homogeneity of the sample load across the radial cross section of analytical scale columns was determined when operating under overload conditions. The study was performed using active flow technology columns operating in parallel segmentation mode. The outlet segmentation ratio was varied to enable different volume fractions of mobile phase, and thus sample, to elute from the peripheral and central flow regions of the column. The amount of solute exiting the peripheral and radial central exit ports was determined as a function of the flow segmentation ratio. The experimental data using an analytical scale column with dimensions, 100?×?4.6?mm, indicated that the sample load distribution was essentially uniform as a function of the column radial cross section.     

水面舰艇编队的最佳防空队形探讨

最佳防御队形以编队对来袭导弹的可探测面积尽可能大为前提,并以"抗饱和攻击能力"为衡量标准.各方向的可拦截批次受两方面因素限制:一是来袭导弹被发现时其与指挥舰的距离,一般距离越大,防御准备就越充分,可拦截批次就越大;二是护卫舰到来袭导弹轨迹的距离,一般距离越小,单次拦截时间就越短,可拦截批次就越大.定义以概率1可拦截批次最小的方向为最危险方向,经计算初始队形各方向可拦截的批次不等,通过"削峰补谷"的方式予以均衡和优化.若以拦截批次的期望为标准,最危险方向与以概率1可拦截的批次为标准的结果相同.如果得到空中预警机的信息支援,在最危险方向上编队就可更早地对距离指挥舰148.4km远的导弹发起拦截,增大编队的抗饱和攻击能力,但由于防空导弹射程限制,预警机提供的信,息支援无法得到充分利用,此时限制编队抗饱和攻击能力的主要矛盾转向防空导弹的射程.     

Performance of a silicon monochromator under high heat load

The performance of a cryogenically cooled double‐crystal silicon monochromator was studied under high‐heat‐load conditions with total absorbed powers and power densities ranging from 8 to 780 W and from 8 to 240 W mm^?2, respectively. When the temperature of the first crystal is maintained close to the temperature of zero thermal expansion of silicon, the monochromator shows nearly ideal performance with a thermal slope error of 0.6 µrad. By tuning the size of the first slit, the regime of the ideal performance can be maintained over a wide range of heat loads, i.e. from power densities of 110 W mm^?2 (at total absorbed power of 510 W) to 240 W mm^?2 (at total absorbed power of 240 W).