The reactivity of 3-methyl- and 5-methyl-1-vinylpyrazoles in free-radical polymerization

3-Methyl-l-vinylpyrazole (M3VP) and 5-methyl-1-vinylpyrazole (M5VP) were isolated as individual substances by vacuum rectification of their mixture (M3VP: M5VP 60 40). For each of them the kinetics of free-radical polymerization in MeOH were measured at low conversions. In both cases the rate of polymerization is proportional to 0.5 order with respect to the initiator (AIBN) concentration. On the other hand, a first order of reaction with respect to monomer concentration is observed only when the latter is relatively low (3M). At higher initial concentrations of monomers the order of reaction becomes less than unity. The overall rate of polymerization for M5VP was higher than for M3VP, whereas the initiation rate remained constant in the whole range of monomer concentrations and did not depend on the exact structure of the monomer. The difference in the rates of polymerization observed for M3VP and M5VP is probably connected with the difference in the key parameterk _p/k _t ^1/2 for each of the two isomers. It is concluded that the correct kinetic information about homo- and co-polymerization of M3VP and M5VP cannot be obtained without their adequate separation.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 413–415, February, 1993.     

Mammalian cell growth studiedin situ by fourier transform infrared spectroscopy

Fourier transform infrared techniques were used to monitor mammalian cell growth plated on attenuated total reflection (ATR) crystals. Consistently, the growth kinetics plots generated from the obtained spectra demonstrated a sigmoidal curve representing a sequence of slow, rapid, then tapering cell growth which correlated well with non-spectral cell growth determinations. Significant advantages over traditional methods of measuring cell growth kinetics are demonstrated. The technique has promising potential to be used to study events in areas such as toxicology and cell biology.     

A simple isotherm equation for describing gas adsorption on heterogeneous microporous solids

A simple isotherm equation for describing gas adsorption on solids showing heterogeneity of microporous structure is proposed. It is shown that this equation gives a good representation of the experimental data of argon, nitrogen and benzene adsorption on different types of activated carbons. Its parameters may be used to characterize heterogeneity of microporous structure of the solids.

---

Eine einfache Isotherme zur Beschreibung der Gas-Adsorption an heterogenen mikroporösen Feststoffen

Zusammenfassung Es wird eine einfache Isotherme zur Beschreibung der Gasadsorption an Feststoffen mit heterogener mikroporöser Struktur vorgeschlagen. Es wird gezeigt, daß diese Gleichung die experimentellen Daten für die Adsorption von Argon, Stickstoff und Benzol an verschiedenen Typen von Aktivkohle gut beschreibt. Die Parameter der Isotherme können zur Charakterisierung der Heterogenität der mikroporösen Struktur von Festkörpern herangezogen werden.

     

Bestimmung der Trichloressigs?ure durch Absorptions- und Fluorescenzmessung

Zusammenfassung Für die Rückstandsanalyse der als Herbicid verwendeten Trichloressigsäure (TCA) wurde eine Methode sowohl für die Absorption- sals auch für die Fluorescenzmessung entwickelt. TCA wird im stark alkalischen Milieu zu Chloroform abgebaut und mit Pyridin zu einer Schiffchen Base umgesetzt (Fujiwara-Reaktion). Diese rote instabile Verbindung wird mit Barbitursäure in einen beständigen Pentamethinfarbstoff überführt, dessen Absorptionsmaximum bei 594 nm liegt. Als Untersuchungsmaterial dienten Bodenproben. Bei einer Einwaage von 100 g Boden lassen sich noch 0,1 ppm TCA nachweisen. Durch Fluorescenzmessung (Anregungsmaximum 588 nm, Emissionsmaximum 611 nm) werden bei gleichen Versuchsbedingungen noch 0,01 ppm erfaßt.

---

Determination of trichloroacetic acid by absorption spectrometry and fluorometry

Summary A method for absorption and fluorescence measuring of the residues of trichloroacetic acid (TCA) used as herbicide was developed. TCA was decarboxylated with strong alkali and converted with pyridine to a Schiff's base (Fujiwara reaction). After the reaction of the Schiff's base with barbituric acid a stable pentamethin dyestuff was formed. The maximum absorbance occurs at 594 nm. Samples of soil were analysed. In a sample of at least 100 g 0.1 ppm of TCA are still detectable. By fluorometry (excitation maximum 588 nm, emission maximum 611 nm) the detection limit is at 0.01 ppm under the same conditions.

     

Volumes,heat capacities and solubilities of amyl compounds in decyltrimethylammonium bromide aqueous solutions

Apparent molar heat capacities and volumes of amylamine (PentNH₂) 0.02m, capronitrile (PentCN) 0.02m and nitropentane (PentNO₂) 0.009m in decyltrimethylammonium bromide (DeTAB) micellar solutions, in water and in octane were measured at 25°C. By assuming that their concentration approaches the standard infinite dilution state, heat capacities and volumes were rationalized by means of previously reported equations following which the distribution constant between the aqueous and the micellar phase and heat capacity and volume of the additives in both phases are simultaneously derived. The present results are compared to those we have previously obtained for pentanol (PentOH). The thermodynamic properties of PentNH₂ in water and in micellar phase are substantially identical to those of PentOH but different from those of PentCN and PentNO₂ whereas the opposite behavior was observed in their pure liquid state and in octane. The nature of the solvent medium seems to affect the thermodynamic behavior of PentNH₂. Also, the study of the apparent molar heat capacities of the amyl compounds investigated here in micellar solutions as a function of surfactant concentration shows evidence of a maximum at about 0.4m DeTAB, which can be attributed to a micellar structural transition. Accordingly, the solubilities of PentCN and PentNO₂ as a function of the DeTAB concentration drop in the neighborhood of the concentration where heat capacities display the maximum.     

Application of a micro carbon rod atomizer as Br-spezific gas-chromatographic detector

Summary A micro carbon rod atomizer has been employed for specific and quantitative bromine determinations. This Br-specific gas-chromatographic detector works by help of InBr-bands and measurement at 372.7 nm. The performance of this flame band emission detector (FBD) is demonstrated by calibration curves and the detection limits of 2 examples (ethyl bromide, ethylene dibromide), the latter being 5 and 36 ng of bromine, respectively. The reproducibility has been found to be 4.3%. An example of this detector in comparison with a thermoconductivity detector (TCD) is presented.

---

Verwendung einer Mikro-Graphitküvette als Br-spezifischer Detektor für die Gas-Chromatographie

Zusammenfassung Eine Mikro-Graphit-Küvette wird für spezifische quantitative Brombestimmungen nach der Indium-Methode bei 372,7 nm benützt und in Verbindung mit einem Gas-Chromatographen als Br-spezifischer Detektor eingesetzt. Die Leistungsfähigkeit dieses Detektors wird an 2 Beispielen (Äthylbromid, Dibromäthan) mit Hilfe von Eichkurven, Bestimmung von Nachweisgrenzen u. ä. demonstriert. Die Nachweisgrenzen liegen bei 5 bzw. 36 ng Brom für die 2 genannten Substanzen. Die Reproduzierbarkeit der Messungen liegt bei 4,3%. Ein Beispiel für die Registrierung eines Gemisches verschiedener Substanzen, gemessen mit dem GC + Flammen-Banden-emissions-Detektor (FBD) und zum Vergleich mit einem Wärmeleitfähigkeitsdetektor (TCD), wird dargestellt.

This research work was supported by financial help of the Bundesminister für Forschung und Technologie in Bonn (GFR).     

Some developments in reaction and solution microcalorimetry,with particular reference to its use in biochemistry and cellular biology

The field of isothermal microcalorimetry as applied to systems of interest for aqueous solution chemistry, biochemistry and in cellular biology is briefly reviewed. Some techniques recently developed in the author's laboratory are described.     

应用反向传播神经网络预测化合物脑血分配系数

选用27种三维结构性质描述符对脑血分配系数预测建立神经网络模型.网络模型选用典型的适合函数逼近的两层结构神经网络对脑血分配系数(lgBB,BB为脑血浓度比)进行预测,计算中采用的模型具有一个双曲正切型激活函数的隐含层和一个线性激活函数的输出层.计算表明,使用小心选择的反向传播神经网络模型对化合物脑血分配系数具有较好的预测能力.     

Thermodynamics of molecular interactions in ethyl iodide+toluene mixtures

The excess Gibb's free energy of mixing, G^E, for ethyl iodide+toluene at 25°C have been obtained from the measured vapor pressuure data. The H^E and G^E values for ethyl iodide+toluene are positive throughout the ethyl iodide concentration range and G^E>H^E. The results have been analyzed in terms of Flory and ideal associated model theory of nonelectrolyte solutions. It has been observed that the ideal associated model approach which assumes the presence of AN and A₂B molecular species describes well (within±10 J-mol^–1 in the worst case) the general dependence of H^E on X_A (mole fraction of ethyl iodide) over the whole composition range for ethyl iodide+toluene mixtures. The equilibrium constants for A+A AB and 2A+BA₂B reactions along with the enthalpies of formation of AB and A₂B molecular species have been calculated.     

Esterification of C1−C8 carboxylic acids to n-butyl esters in aqueous solutions for their gas chromatographic analysis

Summary The esterification of C₁–C₈ fatty acid in aqueous solutions and in the presence of sulfuric or hydrochloric acid and with n-butanol is described. It has been established that the esterification can be used for the quantitative determination of these fatty acids in the concentration ratio range of [H₂O]/[n-BuOH]=0.01–5.3. In the concentration ratio range of 0.01–0.8 the water present does not interfere. In the concentration range of above 0.8 anhydrous sodium sulfate is used for binding the water, in the amount of [Na₂SO₄.anh.]/[H₂O]0.2.