Model studies of the chemisorption of hydrogen and oxygen on nickel surfaces

Atomic chemisorption of hydrogen and oxygen on the Ni(100) surface has been studied using an Effective Core Potential (ECP) approach described in a previous paper. Clusters of up to 50 nickel atoms have been used to model the surface. The computed chemisorption energies are 62 kcal/mol (exp. 63 kcal/mol) for hydrogen and 106 kcal/mol (exp. 115–130 kcal/mol) for oxygen. Correlating the adsorbate and the cluster-adsorbate bonds is extremely important for obtaining accceptable results, particularly for oxygen. Reasonable convergence of chemisorption energies is obtained with 40–50 cluster atoms for both hydrogen and oxygen. For hydrogen the addition of a third cluster layer stabilizes the results considerably. Both hydrogen and oxygen are adsorbed at (or close to) the four-fold hollow site. The calculated barriers for surface migration are also in good agreement with the experimental estimates. The calculated equilibrium heights above the surface are on the other hand too high compared with experiments. This disagreement is believed to be due to core-valence correlation effects, which are not incorporated in the present ECP. The cluster convergence for the height above the surface is much slower than for the chemisorption energy.     

Fourier transform infrared reflection-absorption spectroscopy of amino acids adsorbed on metal surfaces

Fourier transform infrared reflection-absorption spectroscopy (FT-IRAS) has been used to study the orientation and coordination of glycine, L-phenylalanine and L-histidine on gold and copper surfaces. It was found that glycine and L-histidine were weakly adsorbed (physisorbed) in the zwitterionic form on gold. The surface chemical bonding of L-histidine and L-phenylalanine to copper were chemical rather than physical by nature. Conclusive evidence was obtained for coordination to copper through both the amino-nitrogen and carboxylate-oxygen atoms.     

Surface modification of soft-glass capillaries for gas chromatography by treatment with water vapour

“Leaching” or “etching” by strong mineral acids seems to be a necessary pretreatment step for the most commonly used deactivation procedures of glass capillaries by reaction with either polyethylene glycol or silylation reagents. The acidic sites which are formed on the surface during this acid treatment cannot be completely removed by the subsequent deactivation process. This drawback can be overcome by performing the leaching with water vapour, resulting in an accumulation of cations at the surface and a decrease in the number of silanol groups. Capillaries of this type show excellent properties for the chromatography of strongly basic compounds. After the wash-out of the alkaline surface layer, the acidity of the support is suited for the chromatography of strongly basic as well as strongly acidic compounds. Due to a lack of reactive acidic sites, special deactivation procedures have to be applied to capillaries produced in this way.     

Nonideal mixing of 16-(9-anthroyloxy) palmitic acid and fatty acid in monolayer

The surface pressure-molecular area curve of the mixed monolayer of 16-(9-anthroyloxy) palmitic acid (16AP) and fatty acid (palmitic or stearic acids) showed various kink points which indicated the phase transitions of the monolayer. On the basis of the surface phase rule, the phase diagrams of the mixed monolayer were elucidated. The bifunctional molecule, 16AP, takes two orientations in a monolayer state, that is, horizontal and vertical ones. Horizontally oriented 16AP and vertically oriented fatty acid form a mixed monolayer but this exhibits deviation from the ideal mixing, which was interpreted in terms of the surface regular solution theory. On the other hand, the 16AP molecule in the vertical state was found to be immiscible with the fatty acid molecule in a monolayer de spite both molecules being vertical to the surface and parallel to each other. This was caused by the participation of the 9-anthroyloxy moiety of 16AP in the interaction of 16AP and fatty acid in the hydrophobic region of the monolayer.     

Platinum(II)‐Crosslinked Single‐Chain Nanoparticles: An Approach towards Recyclable Homogeneous Catalysts

We introduce the synthesis and in‐depth characterization of platinum(II)‐crosslinked single‐chain nanoparticles (Pt^II‐SCNPs) to demonstrate their application as a recyclable homogeneous catalyst. Specifically, a linear precursor copolymer of styrene and 4‐(diphenylphosphino)styrene was synthesized via nitroxide‐mediated polymerization. The triarylphosphine ligand moieties along the backbone allowed for the intramolecular crosslinking of single chains via the addition of [Pt(1,5‐cyclooctadiene)Cl₂] in dilute solution. The successful formation of well‐defined Pt^II‐SCNPs was evidenced by size exclusion chromatography, dynamic light scattering, nuclear magnetic resonance (¹H, ³¹P{¹H}, ¹⁹⁵Pt), and diffusion‐ordered spectroscopy. Finally, the activity of the Pt^II‐SCNPs as homogeneous, yet recyclable catalyst was successfully demonstrated using the example of the amination of allyl alcohol.     

Copper‐Catalyzed Enantioselective Arylative Desymmetrization of Prochiral Cyclopentenes with Diaryliodonium Salts

A copper‐catalyzed enantioselective arylative desymmetrization of prochiral cyclopentenes with diaryliodonium salts was developed. In the presence of a catalytic amount of a chiral copper–bisoxazoline complex, which was generated in situ, the reaction of 4‐substituted or 4,4‐disubstituted cyclopent‐1‐enes with diaryliodonium hexafluoroarsenates afforded the chiral arylated products in good yields with excellent enantioselectivity. A cyclohexyl‐containing Box ligand was essential for the high enantioselectivity. Transformation of the enantiomerically enriched adducts into other chiral building blocks is also documented.     

Ruthenium‐Catalyzed Cascade Annulation of Indole with Propargyl Alcohols

Cascade transformations forming multiple bonds and one‐pot procedures provide rapid access to natural‐product‐like scaffolds from simple precursors. These atom‐economic processes are valuable tools in organic synthesis and drug discovery. Herein, we report on ruthenium‐catalyzed cascade annulations of indole with readily available propargyl alcohols. These provide rapid access to diverse carbazoles, cyclohepta[b]indoles, and further fused polycycles with high selectivity. A bifunctional ruthenium complex featuring a redox‐coupled cyclopentadienone ligand acts as a common catalyst for the different cascade processes.     

Steric Effect of Carboxylate Ligands on Pd‐Catalyzed Intramolecular C(sp2)–H and C(sp3)–H Arylation Reactions

A bulky carboxylic acid bearing three cyclohexylmethyl substituents at the α‐position, namely, tri(cyclohexylmethyl)acetic acid, is demonstrated to act as an efficient ligand source in Pd‐catalyzed intramolecular C(sp²)?H and C(sp³)?H arylation reactions. The reactions proceed smoothly under mild reaction conditions, even at room temperature due to the steric bulk of the carboxylate ligands, which accelerates the rate‐determining C?H bond activation step in the catalytic cycle.     

Recent Development of Durable and Self‐Healing Surfaces with Special Wettability

Artificial special wetting surfaces have drawn much interest due to their important applications in many fields. Nevertheless, tremendous challenges still remain for the fabrication of wetting surfaces with durable and self‐healing properties. Here, recent progress of durable, self‐healing wetting surfaces is highlighted by discussing the fabrications of several typical wetting surfaces including superhydrophobic surfaces, superamphiphobic surfaces, underwater superoleophobic surfaces, and high hydrophilic antifouling surfaces based on expertise and related research experience. To conclude, some perspectives on the future research and development of these special wetting surfaces are presented.

     

Effect of surface morphology on measurement and interpretation of boundary slip on superhydrophobic surfaces

Highly liquid repellent surfaces have been obtained by the combination of roughness and hydrophobicity. Studies have reported that the flow over such surfaces exhibits larger boundary slip as compared to the smooth hydrophobic surfaces. However, the surface roughness can also lead to apparent slip. Thus, the effect of the two factors, that is, wettability and roughness, needs to be segregated. In this study, we have measured the slippage of water on rough hydrophilic and hydrophobic surfaces using colloidal probe atomic force microscopy technique (CP‐AFM). Results showed that the effect of surface roughness on the measured slip is dominant over that of wettability. It was also found that slip on surfaces with sparsely distributed asperities is highly local and measurements on various locations give dissimilar results. The results suggested that the main reason of the larger slip, on rough hydrophobic surfaces, is likely to be the roughness and not the hydrophobicity. Moreover, it was also found that the slip does not vary considerably with the increase or decrease in the shear rate. Most likely, this kind of slip phenomena is caused by the apparent decrease of the drag force, because the nanoasperities on the surface restrict the probe from reaching the surface properly. Copyright © 2016 John Wiley & Sons, Ltd.