普朗克常量测定系统中实验数据的采集和处理

介绍了在光电效应实验系统改造中,关于实验数据的采集和处理方法。     

钙钛矿锰氧化物La0.7Sr0.3MxMn1-xO3(M=Cr,Fe)的巨磁电阻效应与磁性

研究了溶胶 -凝胶法制备氧化物巨磁电阻材料的工艺 ,制备了La0 .7Sr0 .3 CrxMn1-xO3 (x =0 ,0 .10 ,0 .15 )和La0 .7Sr0 .3 FexMn1-xO3 (x =0 .0 5 ,0 .10 ,0 .16 )两系列的单相钙钛矿锰氧化物多晶样品 ,并研究了Cr ,Fe替代La0 .7Sr0 .3 MnO3 中部分Mn后对其结构、磁性和巨磁电阻性质的影响 .观察到La0 .7Sr0 .3 Cr0 .15Mn0 .85O3 和La0 .7Sr0 .3 Fe0 .0 5Mn0 .95O3 两个样品的电阻 温度曲线都出现了双峰 .定性讨论了可能产生双峰的机制 .随Cr(或Fe)替代量的增加 ,材料的居里温度很快下降 ,铁磁性减弱 ,导电性降低 ,巨磁电阻效应增强 .但与Fe掺杂相比 ,相同数量的Cr掺杂对材料的影响要小 .     

Equation of state of solids from high-pressure isotherm

A new variant of the method of finding the equation of state in the Mie–Grüneisen form is presented. It is based only on high-pressure isotherms of solids. Using this procedure, the semiempirical equation of state and shock adiabats of solids may be found at high pressures and high temperatures. The method is tested on periclase MgO within the range of shock pressures up to 300–500 GPa.     

Experimental gravity induced coexistence curve of methyl fluoride near the critical point

Abstract

The top part of the coexistence curve of methyl fluoride in the critical region has been determined first by direct observation of the disappearance of the meniscus of the fluid situated in a high-pressure light scattering cell and subsequently from the measured maximum depolarization ratio of an appreciable number of isochores close to the critical point. The experimental data obtained from direct observations yield a coexistence curve which nearly coincides with that found recently from pVT measurements. However, the data obtained from light scattering experiments describe a gravity induced coexistence curve which lies above the previous one and which shows a minimum at the critical point. The complete experimental data have been used to evaluate the critical parameters p_c, ρ_c and T_c and the critical exponent β.     

Fast Neutron Sensitivity of TL Detectors using Proton Radiator Techniques

TL materials have a small intrinsic sensitivity for fast neutrons. In order to increase this sensitivity one uses hydrogen containing radiators giving recoil protons as a result of the neutron interaction. By combining the proton radiator technique with the use of TL detectors having various glow peaks with a different response to recoil protons an additional sensitivity yield can be reached. The paper deals with the calculation procedure for the (radiator) sensitivity component. For the LiF phosphors TLD-600 and TLD-700 calculated and experimentally determined fast neutron sensitivities are presented for the glow peaks V and VII. The results show that for accident dosimetry a sufficient agreement of the dedector response with the dose-to-fluence conversion factors is obtained.     

A critique of the unsaturable trap model of radiation damage in metals

The unsaturable trap model, which attributes the increase of the electrical resistivity of fcc metals during electron irradiation in the temperature regime of Stage-II recovery to the trapping of Stage-I_E interstitials at impurity atoms, is shown to be in serious disagreement with the experiments, contrary to opposite statements in the literature. As shown recently, the predictions of the unsaturable trap model are independent of the dimensionality of the diffusion of the Stage-I_E interstitials. Previous attempts to rule out a one-dimensional migration of the Stage-I_E interstitials (and hence the two-interstitial model) on the basis of the alleged agreement of the unsaturable trap model with Stage-II damage curves are thus meaningless. On the contrary, it is demonstrated that the two-interstitial model accounts for minute details of the measured Stage-II damage curves in a natural way.     

一维光子晶体结构参数对禁带带隙的影响研究

采用平面波法(PWM)计算一维光子晶体的带隙结构。分别就构造一维光子晶体结构的高低折射膜层的介电常数及填充比(高折射膜层的厚度与晶体周期长度的比值)对禁带带隙宽度的影响作出分析。通过最小二乘曲线和曲面拟合得到带宽与介电常数或带宽与填充比的函数关系图，以确定最佳的禁带带宽，从而设计一维光子晶体的周期结构。对高低折射膜层为GaAs/空气组成的一维光子晶体，介电常数比约为13/1，当填充比为0.16时，计算得禁带带宽为0.2564×2πc/Λ，禁带的中心频率为0.3478×2πc/Λ，与实验数据吻合。     

激光诱导击穿光谱技术对火成岩岩性的高精度识别

在石油勘探领域,细碎岩屑样品的岩性识别,特别是物性接近的火成岩的高精度识别是地质学的难题之一。针对这一问题,提出了一种基于激光诱导击穿光谱技术(LIBS)元素分析和全碱-硅(TAS)图版的新方法。利用自主搭建的LIBS系统,首先通过对比实验,系统的研究了脉冲能量、采集延时、采集方式、预燃对光谱信号的影响,确定了对火成岩样品元素分析的最佳条件：脉冲能量50 mJ,采集延时2 μs,采集同一样品表面20个不同点的光谱积分平均,并通过实验证明了预燃的样品处理方式不适合火成岩样品,有效提高了样品检测光谱数据的重复性。随后确定了火成岩岩性识别常用7种元素(钠镁铝硅钾钙铁)的特征谱线,定性分析和比较了不同岩性的火成岩样品;利用已知元素含量的国标系列岩石样品信息,生成了钠、硅、钾的定标曲线,线性相关系数均大于0.9,并利用国标岩石样品考察了定量分析的准确性;利用定标曲线法定量分析了火成岩样品的元素含量,并采用TAS图版法识别火成岩的岩性,准确率达90.7%。研究表明,LIBS技术能够有效实现火成岩岩性的高精度识别。     

一个通用的记忆器件模拟器

本文根据惠普忆阻器模型提出了一个新的接地忆阻器模拟等效电路.并以此为基础,采用常规的电子元件构建了一个通用的记忆器件模拟器.该模拟器能在电路拓扑结构不变的情况下,通过改变接入元件的性质能将接地忆阻器分别转化为浮地忆阻器、浮地忆感器和浮地忆容器.由于该模拟器是浮地的,因而可以方便的与其他电子器件实现灵活的连接形式.Pspice仿真实验验证了模拟器的真确性和有效性.