Electron Paramagnetic Resonance and Proton Nuclear Magnetic Resonance Relaxations in Polyanilines

Magnetic resonance measurements, including nuclear magnetic resonance T₁ and T₁ and electron paramagnetic resonance T₁ and T_2e relaxation times are presented for polyanilines prepared according to a modification of the conventional synthesis and doping methods, showing a conductivity higher than that of standard HCl-polyaniline polymers. The results, obtained as a function of the doping rate, are interpreted in terms of one-dimensional diffusive motions of spin and charge carriers. High anisotropy in the spin diffusion rate is found. In the framework of the model of single metallic polymer chains, this leads to the conclusion that in our polyanilines the mechanism of conduction is more markedly one-dimensional. © 1997 John Wiley & Sons, Ltd.     

Dielectric relaxation of LC-thermotropic poly(ester imide)s

Two different series of poly(ester imide)s, which are distinguished from each other in the orientation of the ester linkages and show well-differentiated thermotropic behavior, are investigated by means of model calculations and dielectric relaxation spectroscopy. Model calculations show that the orientation of the ester linkages has a strong influence on the rotational energy barriers. The dielectric relaxation spectra of both series shows three relaxation regions in the temperature range between 100 and 400 K that have been identified as the α-, β- and γ-relaxation processes. A difference of about two orders of magnitude between the characteristic rates of the γ-relaxation is the main feature observed in the dielectric response. However, the β-relaxation shows very similar behavior for both series. The differences in the relaxation behavior in the solid state are interpreted on the basis of the rotational barriers deduced from the model calculation results. © 1997 John Wiley & Sons, Inc.     

Molecular probe techniques for studying diffusion and relaxation in thin and ultrathin polymer films

Two optically based, molecular probe techniques are employed to study relaxation and small-molecule translational diffusion in thin and ultrathin (thicknesses < ∼200 nm) polymer films. Second harmonic generation (SHG) is used to study the reorientational dynamics of a nonlinear optical chromophore, Disperse Red 1 (DR1) (previously shown to be an effective probe of α-relaxation dynamics) either covalently attached or freely doped in polymer films. Our studies on films ranging in thickness from 7 nm to 1 μm show little change in T_g with film thickness; however, a substantial broadening of the relaxation distribution is observed as film thickness decreases below approximately 150 nm. Experimental guidelines are given for using fluorescence nonradiative energy transfer (NRET) to study translational diffusion in ultrathin polymer films. Appropriate choice of a fluorescence donor species is important along with ensuring that diffusion is slow enough to be measured appropriately. Initial results on the diffusion of a small-molecule probe, lophine, in poly(isobutyl methacrylate) indicates that there is little change in probe diffusion coefficients in films as thin as 90 nm as compared to bulk films. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 2795–2802, 1997     

Structural relaxation of glass-forming polymers based on an equation for configurational entropy, 4. Structural relaxation in styrene-acrylonitrile copolymer

The structural relaxation process in styrene-acrylonitrile copolymer has been characterized by means of differential scanning calorimetry (DSC) experiments. The results in the form of heat capacity, c_p(T), curves are analyzed using a model for the evolution of the configurational entropy during the process recently proposed by the authors.^11,12 The model simulation allows one to determine the enthalpy (or entropy) structural relaxation times and the β parameter of the Kohlrausch-Williams-Watts equation characterizing the width of the distribution of relaxation times. This material parameters are compared with their analogues determined from the dielectric and dynamic-mechanical relaxation processes. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 2201–2217, 1997     

A rigorous comparison of theoretical autocorrelation functions with dielectric relaxation parameters for the alpha process of polymers

Recently, tables of parameters used to represent experimental dielectric relaxation data as well as autocorrelation functions have become available. The experimental and autocorrelation function data were represented with the Havriliak–Negami function using rigorous statistical techniques. These tables include not only parameters and their temperature dependencies, but also the confidence intervals for all of the parameters. The important parameters for this work are the two shape parameters, α and β, which represent the width and skewness of the relaxation process, respectively. A comparison is made between the experimental data and several autocorrelation functions by calculating the minimum distance (in units of standard deviations) between the experimental values of αβ parameters for a specific polymer and the αβ parameters corresponding to the autocorrelation functions reported in these tables. Quantities derived from these minimum distances (a distribution function and an error function) are reported for each of the autocorrelation functions. These results are discussed in terms of the basic assumptions of the mode coupling theory. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 1887–1897, 1997     

膜/液界面浓度极化现象的介电解析

对由强、弱荷电膜和溶液构成的膜／液非均匀体系，在10－107Hz频率范围进行了介电测量，在直流偏压下，该体系显示了二个显著的介电弛豫．利用具有电导率分布相，即浓度极化相的介电理论对强行电的离子交换膜的结果进行了介电解析，从实验上测得的介电参数求出了反映膜／液界面浓度极化层构造的参数，讨论了该体系产生介电弛像的原因、说明了介电理论的合理性，并提出了膜／液界面体系产生介电弛豫现象的可能机理．     

冲击加载下20钢中弹性前驱波衰减与应力松弛行为实验研究

 通过改变样品厚度，对平面冲击加载下20钢的弹性前驱波的波幅衰减和应力松弛进行了实验研究。采用激光速度干涉测速仪（VISAR）实测了样品后自由面速度历史，采样频率达到1 ns，保证了实验结果的准确性。实验结果显示：Hugoniot弹性极限随着传播距离呈指数衰减，在所研究的样品厚度范围内，Hugoniot弹性极限减小了44%；应力松弛行为和弹性前驱波的上升沿时间也依赖于传播距离；冲击加载的强度对材料动态屈服行为的影响很小。     

Characterization and degradation of the poly(methylphenylsiloxane)–poly(methyl methacrylate) graft copolymer

Poly(methylphenylsiloxane)–poly(methyl methacrylate) graft copolymers (PSXE-g-PMMA) were prepared by condensation reaction of poly(methylphenylsiloxane)-containing epoxy resin (PSXE) with carboxyl-terminated poly(methyl methacrylate) (PMMA), and they were characterized by gel permeation chromatography (GPC), infrared (IR), and ²⁹Si and ¹³C nuclear magnetic resonance (NMR). The microstructure of the PSXE-g-PMMA graft copolymer was investigated by proton spin–spin relaxation T₂ measurements. The thermal stability and apparent activation energy for thermal degradation of these copolymers were studied by thermogravimetry and compared with unmodified PMMA. The incorporation of poly(methylphenylsiloxane) segments in graft copolymers improved thermal stability of PMMA and enhanced the activation energy for thermal degradation of PMMA. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2521–2530, 1998     

Dielectric and dynamic mechanical relaxation studies on poly(aryl ether ketone)s

The relaxation behavior of four amorphous poly(aryl ether ketone)s was investigated using dielectric relaxation spectroscopy and dynamic mechanical analysis. The temperature dependence of the relaxation times of the glass transition process and the cooperative nature of this process were unaffected by changes in polymer structure. The temperature location of the loss peaks for all polymers progressed smoothly between the low frequency of the mechanical measurements and the higher frequencies of the dielectric probe. Differences were observed in mechanical activation energy and dielectric relaxation strength for one polymer which contained a significant concentration of meta linkages, compared with the para-linked polymers, while relaxation broadness was generally greater in the dynamic mechanical mode. Changes in chemical structure had little effect on the shape, intensity, and location of the β-relaxation peak, the main observation being that the Arrhenius activation energy measured by dynamic mechanical analysis was significantly higher than that calculated from the dielectric data. The dielectric β-relaxation was sensitive to absorbed moisture. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 851–859, 1998     

Cooperative motions in PVC studied by thermally stimulated currents: Comparison with A.C. dielectric derivative analysis

The thermally stimulated current–thermal sampling (TSC–TS) technique was used to study the broadened glass transition in conventional “atactic” poly(vinyl chloride), PVC. The activated parameters obtained from the TSC–TS data, mainly the apparent activation energy (E_a), characterize the breadth of glass transitions in a very sensitive way. These results are compared with those values of E_a obtained from the literature, using a recently proposed method of analyzing a.c. dielectric constants and their derivatives, over the temperature range of −100–130°C. Both techniques detect weak cooperative glass transition-like relaxations well below the main glass transition of ca. 80°C. As is the case with “atactic” PMMA, the data suggest that compositional heterogeneity related to a small fraction of predominantly isotactic sequences contribute to the broad glass transition extending ca. 60°C below the main glass transition in atactic PVC. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 913–918, 1998