银胶体系中吖啶橙、吡啶共吸附竞争的研究

本文利用光学多道分析仪,着重研究了吖啶橙—银胶—吡啶体系;观察了吖啶橙荧光的两次瞬间增强的时间效应荧光谱;分析了吖啶橙与吡啶在银表面上共吸附竞争以及氯化钾在这一竞争中所起的作用。对于表面与分子间相互作用的这一规律作了初步探讨。     

Particle sizing by time-resolved Mie calculations—A numerical study

If a small transparent particle is illuminated with a short laser pulse, the signals of the individual scattering light orders appear temporally successively. Since to each scattered light order belongs a specific optical path through the particle, the particle size can be determined from the time difference between the detected scattered light signals. For the case of a detector position within the backscatter region, which especially is important in measuring practice, the time difference between the specular reflection signal and the signal after a single internal reflection (refraction of second order) must to be evaluated. In the numerical simulation we generate the concerned scattered light signals by using time-resolved Mie calculations and in this paper we present the geometrical models, which permit a correct interpretation of the temporal behavior of these pulse-induced scattered light signals.     

Analysis on surface charging of insulator prior to flashover in vacuum

Prior to the flashover across an insulator in vacuum, the insulator surface is usually charged. It is of great importance to investigate the charging phenomena for better understanding the flashover characteristics. It is considered that there are two kinds of mechanisms closely related to the surface charging of insulator i.e., the secondary electron emission occurred over an insulator, and while employing a perfect electrode contact ahead of electron emission into vacuum, the charge injection and accumulation occurred inside the surface layer of an insulator. Based on the rigorous analysis of the kinetic processes of both primary and secondary electrons, the related surface charges were theoretically deduced. Involving the detrapping of charges trapped and the recombination of charges injected, the charging process due to charge injection and accumulation was analyzed. Some formulas were given to express the density of surface charges.     

Band bending at the Si(1 1 1)–SiO2 interface induced by low-energy ion bombardment

Experiments employing photoreflectance spectroscopy have uncovered band bending due to electrically active defects at the Si(1 1 1)–SiO₂ interface after sub-keV Ar⁺ ion bombardment. The band bending of about 0.5 eV resembles that for Si(1 0 0)–SiO₂, and both interfaces exhibit two kinetic regimes for the evolution of band bending upon annealing due to defects healing. The healing takes place about an order of magnitude more quickly at the (1 1 1) interface, however, probably because of less fully saturated bonding and higher compressive stress.     

Beam bending through compound structure with two subwavelength metallic slits in each period

To provide a more practical, easy-to-implement method to achieve directional modulation with a plasmonic lens, beam manipulation method via compound metallic gratings with two subwavelength slits filled with different dielectrics inside each period is proposed and numerically investigated by finite-difference time-domain (FDTD) method. Compared with conventional metal-grating based structures, phase retardation is tuned by the Fabry-Pérot (FP) resonant condition and light bending is achieved by constructing a carefully designed, curved phase front for the plasmonic lenses. Our designs have advantages in ease of fabrication and capability to perform in the far field. With these advantages, the designs are expected to be valuable in applications such as plasmonic circuits and photonic communication.     

Densely-packed self-assembled monolayers on gold surfaces from a conformationally constrained helical hexapeptide

A novel hexapeptide was functionalized at the N-terminus by a lipoyl group for binding to gold substrates. Owing to the high content of α-aminoisobutyric acid residues, the peptide adopts a rigid helical conformation despite the shortness of its main chain. Binding of the peptide to gold was investigated by quartz crystal microbalance, cyclic voltammetry, X-ray photoelectron spectroscopy, and scanning tunneling microscopy under ultra-high vacuum conditions. Scanning tunneling microscopy experiments revealed that the peculiar self-assembly properties of this short helical peptide determine the complex morphology of the monolayer, showing ‘stripes’, i.e. peptide aggregates horizontally layered on the gold surface, and ‘holes’, i.e. Au vacancy islands coated by the peptide monolayer.     

Growth of epitaxial thin Pd(1 1 1) films on Pt(1 1 1) and oxygen-terminated FeO(1 1 1) surfaces

Thin Pd films (1-10 monolayers, ML) were deposited at 35 K on a Pt(1 1 1) single crystal and on an oxygen-terminated FeO(1 1 1) monolayer supported on Pt(1 1 1). Low energy electron diffraction, Auger electron spectroscopy, and Kr and CO temperature programmed desorption techniques were used to investigate the annealing induced changes in the film surface morphology. For growth on Pt(1 1 1), the films order upon annealing to 500 K and form epitaxial Pd(1 1 1). Further annealing above 900 K results in Pd diffusion into the Pt(1 1 1) bulk and Pt-Pd alloy formation. Chemisorption of CO shows that even the first ordered monolayer of Pd on Pt(1 1 1) has adsorption properties identical to bulk Pd(1 1 1). Similar experiments conducted on FeO(1 1 1) indicate that 500 K annealing of a 10 ML thick Pd deposit also yields ordered Pd(1 1 1). In contrast, annealing of 1 and 3 ML thick Pd films did not result in formation of continuous Pd(1 1 1). We speculate that for these thinner films Pd diffuses underneath the FeO(1 1 1).     

The structure of monolayer SiO2 on Mo(1 1 2): A 2-D [Si-O-Si] network or isolated [SiO4] units?

In this letter, atomically resolved scanning tunneling microscopic (STM) images obtained from monolayer SiO₂/Mo(1 1 2) are presented. The results are consistent with a previously proposed structural model of isolated [SiO₄] units based on vibrational features observed by high-resolution electron energy loss spectroscopy (HREELS) and infrared reflection-absorption spectroscopy (IRAS), and oxygen species identified by ultra-violet photoemission spectroscopy (UPS). These results are inconsistent with a structural model that assumes a two-dimensional (2-D) [Si-O-Si] network. These data illustrate that a metal substrate, although coated with an oxide thin layer, can be directly imaged at the atomic-scale with STM.     

维生素A酸在银溶胶液中的表面增强拉曼散射光谱

将水中不溶的药物维生素A酸(VAA)溶于氯仿中,然后与银溶胶液混合,振摇,取静置分层后的上层溶胶液测定表面增强拉曼光谱,氯仿在银溶胶中无表面增强效应,不干扰维生素A酸的测定。与固体粉末拉曼光谱相比较,对光谱峰归属进行了解释。通过分析CO伸缩振动带和ν(COO)振动峰明显增强的现象,讨论了维生素A酸分子在银颗粒表面可能的吸附取向,并推断维生素A酸在银表面的吸附发生在COO-基团。以维生素A酸表面增强拉曼光谱在1583cm-1处的峰强度对浓度进行线性回归,求得线性回归方程Y=10×108+95585,在10×10-6～50×10-5mol·L-1范围呈良好的线性关系,最小检测限为10×10-7mol·L-1。结果表明,维生素A酸表面增强拉曼光谱峰数量少,灵敏度高,是定量分析痕量维生素A酸的很好方法。