Separation of carbon nanotubes by frit inlet asymmetrical flow field-flow fractionation

Flow field-flow fractionation (flow FFF), a separation technique for particles and macromolecules, has been used to separate carbon nanotubes (CNT). The carbon nanotube ropes that were purified from a raw carbon nanotube mixture by acidic reflux followed by cross-flow filtration using a hollow fiber module were cut into shorter lengths by sonication under a concentrated acid mixture. The cut carbon nanotubes were separated by using a modified flow FFF channel system, frit inlet asymmetrical flow FFF (FI AFIFFF) channel, which was useful in the continuous flow operation during injection and separation. Carbon nanotubes, before and after the cutting process, were clearly distinguished by their retention profiles. The narrow volume fractions of CNT collected during flow FFF runs were confirmed by field emission scanning electron microscopy and Raman spectroscopy. Experimentally, it was found that retention of carbon nanotubes in flow FFF was dependent on the use of surfactant for CNT dispersion and for the carrier solution in flow FFF. In this work, the use of flow FFF for the size differentiation of carbon nanotubes in the process of preparation or purification was demonstrated.     

压力流驱动电色谱分析方法及其若干色谱行为

压力流驱动电色谱分析方法是一种新型色谱技术。它组合了ＨＰＬＣ和电泳两种技术，为分离提供了更多可控制的因素。介绍了压力流驱动电色谱的装置和毛细管电色谱柱的装置方法，从理论上讨论了影响电色谱分离的因素并用实验数据加以证明。最后尝试性地将电色谱法用于测定香蕉样品中萨索啉（Ｓａｌｓｏｌｉｎｏｌ）等的含量。     

Use of intermittent jets to enhance flux in crossflow filtration

This paper deals with the influence of a new flow unsteadiness on the permeate fluxes in crossflow filtration. A pneumatically controlled valve generates intermittent jets from the main flow, causing the formation of large vortices moving downstream along the tubular membrane. The main results of the numerical calculation of such flows are given. The experimental study was carried out by filtering a bentonite suspension through an ultrafiltration mineral membrane. Time evolutions of flux were achieved in steady and unsteady operating conditions. Results concerning the influence and limits of the nozzle to tube diameter ratio and the jet velocities are discussed. The applicability of such an unsteady flow is examined with a view to effects on energy consumption and possible viscosity effects.     

Enthalpies of dilution of electrolyte solutions by flow microcalorimetry

The enthalpies of dilution of NaCl, Me₄NBr, andn-Bu₄NBr were measured in water at 25°C with a new flow microcalorimeter. The data were analyzed with a polynomial equation, and the derived relative apparent molal enthalpies _L are in good agreement with literature values. Provided care is taken that mixing is complete, flow calorimeters are as reliable and much less time-consuming than cell-type instruments for enthalpies of dilution measurements.     

流动注射—化学发光法测定苯甲醛

依据苯甲醛增强没食子酸－过氧化氢－氢氧化钠体系化学发光的性质，建立了苯甲醛的流动注射化学发光分析法。     

Some observations on the automation by flow injection analysis of the spectrophotometric determination of amino acids and proteins witho-phthalaldehyde

Automation by flow injection analysis with Spectrophotometric detection of the determination of total amino acids and proteins witho-phthalaldehyde is not straightforward. The use of spectrophotometry, instead of spectrofluorimetry, and of N-acetyl-L-cysteine, instead of the conventional mercaptoethanol is advantageous because of the lower variability of absorptivities with respect to fluorescence yields, and the larger stability of the derivatives. Under adequate working conditions and with leucine as reference, the procedure can be used for the evaluation of total amino acids. A similar procedure is proposed for the analysis of proteins in a sample. Limits of detection are 1 × 10^–5 M for amino acids, and 1 × 10^–6 M for proteins, respectively.     

Electrochemical response of ascorbic acid at conducting and electrogenerated polymer modified electrodes for electroanalytical applications: a review

The present short review deals with electroanalytical aspects of electrochemical response of ascorbic acid (Vitamin C) at conducting and electrogenerated polymer modified electrodes. Two main topics are considered: (i) electrocatalytic oxidation of ascorbate at conducting polymer modified electrodes, leading to electroanalytical techniques for ascorbate assay, and (ii) retardation of ascorbate penetration through a layer of electrogenerated polymers, leading to permselective coatings and their diverse uses, especially for biosensing devices.     

静脉血流动力学模型基本波的相互作用北大核心CSCD

静脉系统是心血管系统的重要组成部分.脉搏波在血液流动中有着突出的重要性.本文主要研究静脉血流动力学模型基本波的相互作用.血流动力学模型是2×2严格双曲型方程组,其基本波包括疏散波和激波,属于血液流动中的脉搏波.基本波相互作用后血管截面面积和血流速度发生相应的变化.     

Analytical solutions of the lattice Boltzmann BGK model

Analytical solutions of the two-dimensional triangular and square lattice Boltzmann BGK models have been obtained for the plane Poiseuille flow and the plane Couette flow. The analytical solutions are written in terms of the characteristic velocity of the flow, the single relaxation time , and the lattice spacing. The analytic solutions are the exact representation of these two flows without any approximation. Using the analytical solution, it is shown that in Poiseuille flow the bounce-back boundary condition introduces an error of first order in the lattice spacing. The boundary condition used by Kadanoffet al. in lattice gas automata to simulate Poiseuille flow is also considered for the triangular lattice Boltzmann BGK model. An analytical solution is obtained and used to show that the boundary condition introduces an error of second order in the lattice spacing.     

Quantitative determination of chloride by means of flow injection analysis with spectrophotometric detection in the UV/VIS range

Chloride is determined indirectly by Spectrophotometric flow injection analysis. Two systems are compared, both based on the principle of ion exchange of easily detectable anions versus chloride from suitable mercury salts. The first method is based on the exchange of chloride with chloranilate which is detected at 332 nm or at 306 nm in neutral or in acidic medium respectively. In the second case, chloride reacts with Hg(SCN)₂. The liberated thiocyanate forms a strongly coloured complex with Fe(III) in acidic solution with an absorption maximum at 460 nm. Both methods have a detection limit of about 5 mol Cl^–/l (175 ng/ml). In the case of the thiocyanate method, the relative standard deviation is about 2% (7 measurements) in the range of 5 to 150 mol/l and decreases significantly to a value of approximately 0.2% at higher concentrations; for the chloranilate method it is 10% for lower and about 1% for higher concentrations respectively.