Aspects of thermal conductivity relative to heat flow

Summary The various techniques and methodologies of thermal conductivity measurement have been conventionally based on the determination of the rate of directional heat flow through a material having a unit temperature differential between its opposing faces. The constancy of this rate depends on the material density, its thermal resistance and the heat flow path itself. The last of these variables contributes most significantly to the true value of steady-state axial and radial heat dissipation depending on the magnitude of transient thermal diffusivity along these directions. The purpose of this paper is to exemplify the above features by defined parameters of heat flow measurement by existing methodologies. No new method is proposed here. Importantly, the relationship between the rate of heat transfer, total heat transferred and thermal conductivity at a given temperature under steady-state conditions for a fixed heat flow path will be illustrated.     

反向流动注射化学发光法测定痕量铁

基于邻菲别名林对高碘酸钾－碱性鲁米诺－铁体系发光强度的增敏作用建立了水体中总铁的反向流动性化学发光检测方法。该法线性范围在１×１０＾－４－１０ｍｇ／Ｌ，检测限为３×１０＾－６ｍｇ／Ｌ，对于５×１０＾－３ｍｇ／Ｌ Ｆｅ测定９次的相对标准偏差为０．９％。此方法已用在水处理中总铁的监测。     

Isoperichoric focusing field-flow fractionation and thin layer isoperichoric focusing based on coupling of gradient generated by primary field with secondary field action: general principles and performances

The primary field forces can generate spatially oriented gradient of the effective property of a continuum or pseudo-continuum fluid (carrier liquid). When this gradient is coupled with the action of a secondary field of identical or different nature the isoperichoric focused zones of the dispersed species can appear. Consequently, they can be separated according to differences responding to the property gradient of the carrier liquid. This concept can be applied under static (non-flow) conditions in thin layer focusing as well as under dynamic conditions with the elution due to the carrier liquid flow in focusing field-flow fractionation. The gradient established by the action of the primary field and the concentration distribution of the isoperichoric focused zone formed by the coupled effect of the gradient and of the primary or secondary field are described theoretically. The rigorous relationship describing the shape of the focused zone is compared with the approximate solutions. The performances of the proposed principle were evaluated by model calculations. Potential experimental configurations considering the implementation of the static and dynamic conditions are discussed. The generalized isoperichoric focusing theory can be applied to describe the particular processes operating in analytical and preparative focusing separations of the particles of various, but especially of biological origin.     

Synthesis and thermal decomposition of lanthanide hexacyanochromate(iii) complexes,Ln[Cr(CN)6]·nH2O (Ln=La-Lu; n=3, 4)

New solid complex of nitrilotriacetic acid and bismuth trichloride was synthesized by a solid phase reaction of nitrilotriacetic acid and bismuth trichloride at room temperature. The composition of the sample is BiCl₃[N(CH₂COOH)₃]_2.5. The crystal structure of the complex belongs to triclinic system with the lattice parameters: α=0.7849 nm, β=0.9821 nm, χ=2.0021 nm, α=96.50°, β=98.76° and γ=90.49°. The far-infrared spectra show the bonding between the Bi ion and N atom of nitrilotriacetic acid. The thermal analysis also demonstrates the complex formation between the bismuth ion and nitrilotriacetic acid. The gaseous pyrolysis product and the final residue in the thermal decomposition process are determined to check the thermal decomposition reaction. This revised version was published online in August 2006 with corrections to the Cover Date.     

分子诱导效应指数与链烷烃的沸点

利用基团的诱导效应指数，首次提出了分子的诱导效应指数的概念，并定义了 链烷烃的有效碳链长度NC＝（MIs,N/MIb,N)·N，式中MIs,N,MIb,N分别为直链和支 链异构体的分子诱导效应指数。研究结果表明，链烷烃的沸点Tb(℃）与NC关系是 ：1n(806.5-Tb)=6.9824-0.11431NC^2/3     

Borchelate und Bormetallchelate, 4. Mitt.

The i.r., u. v.,¹H n.m.r.,¹³C n.m.r., and¹¹B n.m.r. spectra of several substituted diphenylboron chelates derived from salicylaldehyde azomethines were compared with respect to the influence of the amine substituentR. O–B–N-6-ring constitution of the chelates29–32 [R=OH, NH₂, NHC₆H₅, N(CH₃)₂] can be deduced from the spectra.

Als 3. Mitt. gilt:F. Umland undE. Hohaus mit Beiträgen vonW. Riepe, K. Brodte, C. Schleyerbach undD. Szonn. Untersuchungen über borhaltige Ringsysteme vom Chelattyp. Forschungsbericht des Landes Nordrhein-Westfalen Nr. 2538. Opladen: Westdeutscher Verlag. 1976.     

Determination of phenol and catechol concentrations with oxygen probes coated with immobilized enzymes or immobilized cells

The enzyme phenol 2-hydroxylase was immobilized on Sepharose and used in conjunction with an O₂ electrode for quantitating phenol. Similarly, catechol 1,2-oxygenase was used for quantitating catechol. A third probe was prepared by immobilization ofTrichosporon cutaneum cells rather than purified phenol 2-hydroxylase for phenol quantitation. The whole cell system gave results comparable to the immobilized enzyme system.     

Conformational energies of cyclenes

An universal function for non-bonded interactions, which takes into account the relative orientation of the bonds is considered in calculating the conformational energies of cycloalkenes and cycloalkadienes. A comparison is made with previous results obtained by using usual 6-exp functions for non-bonded interactions.     

Substituenteneffekte auf die C–C-Bindungsstärke, 8. Standardbildungsenthalpien und Spannungsenthalpien von 1,1,2,2-Tetraethylethylenglykol-dimethylether und D,L-1,2-Dimethyl-1,2-diphenylethylenglykol-dimethylether

Effects of Substituents on the Strength of C - C Bonds, 8¹. - Heats of Formation and Strain of 1,1,2,2-Tetraethylethylene Glycol Dimethyl Ether and D,L .-1,2-Dimethyl-l,2-diphenylethylene Glycol Dimethyl Ether The heats of combustion of the title compounds 1 and 2 were measured calorimetrically with the result (kcal mol ^-1, s. d. in parentheses) ΔH°_c = − 1880.1 (± 0.6) and − 2373.3 (± 1.4). The heat of vaporisation of 1 ΔH^v = 14.3 (± 0.3) and the heat of sublimation of 2 ΔH^sub = 27.2 (± 0.5) were derived from their temperature dependance of the vapor pressure. The latter were determined between 30 and 80°C using a flow method. The resulting standard heats of formation ΔH°_t(g) = −122.4 (± 0.7) and −43.8 (±1.5) for 1 and 2 correspond to a strain enthalpy (_s) of 15.9 and 8.0 kcal mol^-1, respectively. The steric strain of the dimethoxyethanes 1 and 2 is about one fourth lower than the strain of the corresponding dimethylethanes 3 and 4 bearing the same substituents. Thus, a methoxy group causes less steric stress than a methyl group.     

Multipole expansion of diatomic overlap

A systematic extension of Ruedenberg's expansion formula is applied to evaluate two-electron integrals occurring in calculations on molecular structure. Minimum STO basis sets are used for all SCF-calculations within the framework of the MEDO-method (Multipole Expansion of Diatomic Overlap). The errors due to this approximation scheme are almost negligible compared to those introduced by the truncated basis set: LiH, Li₂ and N₂ are chosen as examples.