Modeling and simulation of free radical polymerization of styrene under semibatch reactor conditions

The first part of this approach is concerned with the elaboration of a radical polymerization model of styrenne, based on a kinetic diagram that includes chemical and thermal initiation, propagation, termination by recombination and chain transfer to the monomer. Furthermore, volume contraction during polymerization is considered, as well as the gel and glass effects. The mathematical formalism that describes the model in terms of moments is explored in detail. The model was then used to predict the changes in monomer conversion and molecular weight after intermediate addition of initiator and monomer. The results of this operation are dependent on the conditions of the reaction mass, quantity, and moment of substance addition. Therefore, the simulations were performed at different times with respect to the gel effect; before, during and after this phenomenon, and also with respect to different temperatures and initiators. Increasing the initiator concentration before the gel effect leads to an earlier appearance of the phenomenon and to a decrease in molecular weight. The ratio reveals a polydispersity index smaller for the intermediate addition of initiator. No significant changes take place during or after the gel effect. If along with the initiator, unreacted monomver (used to dissolve the initiator) enters the reactor, a small dip in conversion is observed. The general conclusion of this paper reveals the intermediate addition of initiator as a method to control polymer properties and to prevent the “dead-end” polymerization of styrene.     

On the statistical independence of various column contributions to band broadening. Part 1: Second moment contributions from statistically independent,longitudinal diffusion in both phases

The total length-based second moment contribution from longitudinal sample diffusion in both phases on a column, σD , is derived by adding individual partial differential contributions to a partial differential equation accounting for the longitudinal diffusion processes only. Although each diffusion-dispersed sample part is equilibrated between two phases, the resulting σ,D (= 2D _mt _m + 2D _st _s) can be interpreted as the sum of two independent contributions in accordance with the variance addition rule. (D _m and D _s are the mean diffusion coefficients and t _mand t _s the mean residence times of the sample in the mobile and stationary phases, respectively.) The same σD expression is derived from the random walk model of Giddings by treating the diffusional process in each phase as statistically independent of the other processes. Under these conditions the broadening contribution from longitudinal diffusion in the mobile phase is shown to be independent of the velocity profile.     

Diastereoselective synthesis of 2-oxiranyl and 2-aziridinyl thiazoles

2-Chloroalkylthiazolyllithiums, prepared by deprotonating the 2-chloroalkylthiazoles with n-BuLi at −78°C in THF, add to ketones or imines affording in ‘one-pot’ oxiranes and aziridines in a Z stereoselective manner.     

Radical addition reactions: factors determining the transition-state geometry

Interatomic distances in the reaction centers of the addition reactions of (i) H^· to the C=C, C=O, N≡C, and C≡C bonds, (ii) ^·CH₃ radical to the C=C, C=O, and C≡C bonds, and (iii) alkyl, aminyl, and alkoxyl radicals to olefin C=C bonds were determined using a new semiempirical method for calculating transition-state geometries of radical reactions. For all reactions of the type X^· + Y=Z → X— Y—Z^· the r ^# _X...Y distance in the transition state is a linear function of the enthalpy of reaction. Parameters of this dependence were determined for seventeen classes of radical addition reactions. The bond elongation, Δr ^# _X...Y, in the transition state decreases as the triplet repulsion, electronegativity difference between the atoms X and Y in the reaction center, and the force constant of the attacked multiple bond increase. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 894–902, April, 2005.     

Investigations on the use of pneumatic cross-flow nebulizers with dual solution loading including the correction of matrix effects in elemental determinations by inductively coupled plasma optical emission spectrometry

The use of a so-called trihedral and a T-shaped cross-flow pneumatic nebulizer with dual solution loading for inductively coupled plasma optical emission spectrometry has been studied. By these devices analyte clouds from two solutions can be mixed during the aerosol generation step. For both nebulizers the correction of matrix effects using internal standardization and standard addition calibration in an on-line way was investigated and compared to elemental determinations using a conventional cross-flow nebulizer and calibration with synthetic standard solutions without matrix matching. A significant improvement of accuracy, both for calibration with internal standardization and standard addition, was obtained in the case of four synthetic solutions containing each 40 mmol L^− 1 Na, K, Rb and Ba as matrix elements and 300 μg L^− 1 Cd, Co, Cr, Cu, Fe, Mn, Ni and Pb as analytes. Calibration by standard addition in the case of dual solution loading has been shown to be very useful in the determination of elements at minor and trace levels in steel and alumina reference materials. The results of analysis for minor concentrations of Cr, Cu and Ni in steel as well as for Ca, Fe, Ga, Li, Mg, Mn, Na, Si and Zn in alumina powder certified reference materials subsequent to sample dissolution were found to be in good agreement with the certificates. Limits of detection were found to be only slightly above those for a conventional cross-flow nebulizer and a precision better than 3% was realized with both novel nebulizers.     

A novel synthesis, including asymmetric synthesis, of 2,4,4-trisubstituted 2-cyclopentenones based on the reaction of 1-chlorovinyl p-tolyl sulfoxides with acetonitrile and its homologues

Reaction of 1-chlorovinyl p-tolyl sulfoxides, which were synthesized from chloromethyl p-tolyl sulfoxide and ketones in high overall yields, with cyanomethyllithium (lithium α-carbanion of acetonitrile) gave adducts in high to quantitative yields. The adducts were treated with LDA followed by lithium α-carbanion of the homologues of acetonitrile to give 3,5,5-trisubstituted enaminonitriles in good to high yields. Hydrolysis of the enaminonitriles under acidic conditions gave 2,4,4-trisubstituted 2-cyclopentenones in good yields. By using the optically active chloromethyl p-tolyl sulfoxide and unsymmetrical ketones, this procedure gave the optically pure 2,4,4-trisubstituted 2-cyclopentenones. The scope and limitations of this method and the mechanism of the reactions are also discussed. These procedures offer a new and effective method for the synthesis of 2,4,4-trisubstituted 2-cyclopentenones from four components, ketones, chloromethyl p-tolyl sulfoxide, acetonitrile, and its homologues.     

A sequential reaction process to assemble polysubstituted indolizidines, quinolizidines and quinolizidine analogues

The ω-iodo-α,β-alkynoates and their ketone, sulfone or phosphonate analogues react with δ-chloropropylamines in MeCN assisted with K₂CO₃ to undergo a sequential S_N2/Michael addition/S_N2/S_N2 reaction process, giving polysubstituted indolizidines or quinolizidines in good to excellent yields. This sequential reaction process is also compatible with three other substituted α,β-alkynoates, affording quinolizidine analogues in moderate to good yields.     

AIBN-initiated radical addition of gem-difluorinated alkyl iodides to alkynes and the Pd-catalyzed Sonogashira coupling reaction of E-phenyl difluoromethylene vinylic iodides with terminal alkynes

The addition of gem-difluorinated alkyl iodides to alkynes initiated by AIBN neatly gave the corresponding difluoromethylene vinyl iodides among which the stereoselectivity of aromatic acetylenes was high. The further coupling reaction of E-phenyl difluoromethylene vinyl iodides with terminal alkynes in the presence of catalytic palladium afforded the substituted difluorinated enynes.     

Ni添加对0.4Zr0.1V1.1Mn0.5Cr0.1合金的相结构和电化学性能的影响

本文通过XRD、SEM、EDS研究了Ti_0.4Zr_0.1V_1.1Mn_0.5Cr_0.1Ni_x(x=0，0.2，0.4，0.6，0.8)合金的相结构和电化学性能。该合金系由BCC结构的V基固溶体主相和六方结构的C14 Laves第二相组成，Ni能够促进第二相的生成，Ni含量的增加导致了各相中的化学组成和晶格参数的变化，并通过电化学方法研究了Ni含量对_0.4Zr_0.1V_1.1Mn_0.5Cr_0.1合金电极的最大放电容量、自放电性能、高倍率放电性能、循环稳定性能等的影响。     

Synthesis of Novel Nucleoside Analog （3R）-2,3-Dideoxy-3-（N-hydroxy-N-methylamino）-L-arabinofuranosyl Uracil

The synthesis of novel nucleoside analog (3R)-2,3-dideoxy-3-(N-hydroxy-N-methylamino)-L-arabinofuranosyl uracil was studied. A twelve-step synthetic route, started from L-ascorbic acid, was designed, and the final product was obtained in 20.8% yield.