Thermal behaviour of polyacrylamidoxime-copper chelates

The purpose of this work was to investigate the effect of several factors (anion type in the copper salt, pH and concentration of the salt solution) on the structure and thermo-oxidative degradation of the polyacrylamidoxime-copper chelates, by using elemental analysis, IR spectroscopy and dynamic thermogravimetry. The chelates containing copper ions as sulphate exhibit a better initial thermal stability than the polyacrylamidoxime fibre presumably due to the crosslinking generated by the intermolecular complexation of the ions; the removal of the sulphate anions takes place concomitantly with the second step of polymeric chain decomposition. The initial thermal decomposition of the chelates formed by copper ions as nitrate begins at lower temperatures as compared to the polyacrylamidoxime fibre, probably by the nitrate anion release, which partly overlaps the initial decomposition of the copper ion-crosslinked polymeric chains. Copper ions as either sulphate or nitrate catalyse the reactions involved in the main step of polyacrylamidoxime fibre decomposition; the higher the copper amount, the stronger the catalytic effect.     

A procedure for measuring the flexibility of single wood-pulp fibres

A way of determining the flexibility of wood-pulp fibres is developed, which involves i) a precise measurement of the topology of single-fibres by using a confocal laser scanning microscope and ii) the measurement of the elastic modulus of the fibres by using a single-fibre fatigue cell. Reported in this paper are the initial results of tests carried out on black spruce fibres, which have been subjected to three different levels of mechanical refining energy, namely ∼1100, 2300, and 3500 kWh/t. It is found that the fibre flexibility rises significantly between the first and second energy levels, but it does not change to the same degree between the second and third ones. The described procedure of measuring the flexibility of fibres may be used to establish the appropriate refiner energy necessary for the production of a specific grade of paper. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 42, No. 1, pp. 115–128, January–February, 2006.     

ENSTAR detector forη- mesic studies

We have initiated a search for a new type of nuclear matter, theη-mesic nucleus, using beams from the multi-GeV hadron facility, COSY at Juelich, Germany. A large acceptance scintillator detector, ENSTAR has been designed and built at BARC, Mumbai and fully assembled and tested at COSY. A test run for calibration and evaluation has been completed. In this contribution we present the design and technical details of the ENSTAR detector and how it will be used to detect protons and pions (the decay products ofη-mesic bound state). The detector is made of plastic scintillators arranged in three concentric cylindrical layers. The readout of the detectors is by means of optical fibres. The layers are used to generate ΔE –E spectra for particle identification and total energy information of stopped particles. The granularity of the detector allows for position (θ and ?ø determination making the event reconstruction kinematically complete     

亚麻等麻类纤维与乙烯基类单体接枝共聚反应的研究进展

近年来,乙烯基类单体与亚麻、大麻、苧麻等麻类纤维的接枝共聚反应已得到关注。本文着重总结接枝的引发方法,包括:1.辐射引发接枝;2.光引发接枝;3.Ce(Ⅳ)离子引发接枝;4.锰盐引发接枝;5.V(Ⅴ)离子引发接枝;6.Fenton's 试剂(Fe~(2+)-H_2O_2)引发接枝;7.过硫酸盐氧化还原引发体系接枝。上述各类引发体系及接枝纤维的结构与性能表征均在本文中作了述评。     

Thermal Oxidative Stability of Heat-Stabilised Polyamide 66 by Differential Scanning Calorimetry

The thermal stability of heat-stabilised polyamide 66 in an oxidative environment is evaluated by DSC. The oxidative stability of the polyamide decreases as a result of repeated injection moulding. The results also indicate that the presence of glass fibres in the polyamide has a negative influence on the oxidative stability. Both isothermal and dynamic DSC measurements seem to be useful tools for assessing the stability of polyamides and there is a relationship between data determined using both procedures. This revised version was published online in July 2006 with corrections to the Cover Date.     

5-羟色胺在碳纤维微电极上的电化学测定及伏安行为研究

本文研究了5 羟色胺在Na2HPO4 KH2PO4(pH6.0)缓冲溶液中,于自制的碳纤维微电极上的伏安行为。在此缓冲溶液中5 羟色胺有一对氧化还原峰,峰电位分别为0.2V和0.4V。峰电流与5 羟色胺的浓度分别在4.0×10-6～4.0×10-5mol/L和5.0×10-6～5.0×10-5mol/L范围内呈良好的线性关系,检出限分别为4.70×10-6mol/L和1.76×10-6mol/L。同时利用多种电化学方法求出了动力学参数。     

Some microrheological aspects of wood-pulp fibres subjected to fatigue loading

Wood-pulp fibres are recognized as concentrically-layered, laminated composite tubes of structural reinforcing material, the cellulose microfibrils, embedded in a cementing matrix of hemicellulose and lignin. When the single fibres are subjected to cyclic mechanical action, their morphological behaviour is characterized by the fatigue growth of micro-voids and surface damage which individually and collectively give rise to stress concentrations, and eventually crack development. The progressive damage phenomena, evinced by the surface imaging and optical sectioning techniques through utilizing confocal laser scanning microscopy, are understood to be consequences of the cumulative material micromechanical degradation and subsequent microstructural breakdown of the cellulose microfibrillar framework. This structural breakdown is believed to effect the fibrillation and flexibilization of the fibres This revised version was published online in August 2006 with corrections to the Cover Date.     

A new multi analytical approach for the identification of synthetic and natural dyes mixtures. The case of orcein-mauveine mixture in a historical dress of a Sicilian noblewoman of nineteenth century

Abstract

In this paper, the application of a multi-analytical approach for the characterisation of synthetic and natural dyes in a historical textile is presented. The work is focused on a historical dress of a Sicilian noblewoman, dating from about 1865–1870. Firstly, SERS on fibre was performed, in order to individuate the classes of dyes employed. The SERS spectra suggested the presence of two main dyes: mauveine and orcein. In order to confirm these preliminary results, two different extraction protocols were applied. The extracts obtained were analysed by ESI-MS, MALDI-ToF and UHPCL-MS analyses, confirming the SERS results. In particular, the application of the ammonia mild extraction technique allowed to selectively extract the phenoxazonic dyes, separating them already in the extraction step from the synthetic ones. Thanks to this multi-analytical approach, this dress could be considered as one of the first examples of employment of synthetic dyes in association with natural ones.