Formation of β‐iPP in isotactic polypropylene/ethylene–propylene rubber blends: Effects of preparation method,composition, and thermal condition

The effects of preparation method, composition, and thermal condition on formation of β‐iPP in isotactic polypropylene/ethylene–propylene rubber (iPP/EPR) blends were studied using modulated differential scanning calorimeter (MDSC), wide angle X‐ray diffraction (WAXD), and phase contrast microscopy (PCM). It was found that the α‐iPP and β‐iPP can simultaneity form in the melt‐blended samples, whereas only α‐iPP exists in the solution‐blended samples. The results show that the formation of β‐iPP in the melt‐blended samples is related to the crystallization temperature and the β‐iPP generally diminishes and finally vanishes when the crystallization temperature moves far from 125 °C. The phenomena that the lower critical temperature of β‐iPP in iPP/EPR obviously increases to 114 °C and the upper critical temperature decreases to 134 °C indicate the narrowing of temperature interval, facilitating the formation of β‐iPP in iPP/EPR. Furthermore, it was found that the amount of β‐iPP in melt‐blended iPP/EPR samples is dependent on the composition and the maximum amount of β‐iPP formed when the composition of iPP/EPR blends is 85:15 in weight. The results through examining the effect of annealing for iPP/EPR samples at melt state indicate that this annealing may eliminate the susceptibility to β‐crystallization of iPP. However, only α‐iPP can be observed in solution‐blended samples subjected to annealing for different time. The PCM images demonstrate that an obvious phase‐separation happens in both melt‐blended and solution‐blended iPP/EPR samples, implying that compared with the disperse degree of EPR in iPP, the preparation method plays a dominant role in formation of β‐iPP. It is suggested that the origin of formation of β‐iPP results from the thermomechanical history of the EPR component in iPP/EPR. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1704–1712, 2007     

The influence of hard‐segments on two‐phase structure and shape memory properties of PCL‐based segmented polyurethanes

Poly(ε‐caprolactone)‐based segmented polyurethanes (PCLUs) were prepared from poly(ε‐caprolactone) diol, diisocyanates (DI), and 1,4‐butanediol. The DIs used were 4,4′‐diphenylmethane diisocyanate (MDI), 2,4‐toluenediisocyanate (TDI), isophorone diisocyanate (IPDI), and hexamethylene diisocyanate (HDI). Differential scanning calorimetry, small‐angle X‐ray scattering, and dynamic mechanical analysis were employed to characterize the two‐phase structures of all PCLUs. It was found that HDI‐ and MDI‐based PCLUs had higher degree of microphase separation than did IPDI‐ and TDI‐based PCLUs, which was primarily due to the crystallization of HDI‐ and MDI‐based hard‐segments. As a result, the HDI‐based PCLU exhibited the highest recovery force up to 6 MPa and slowest stress relaxation with increasing temperature. Besides, it was found that the partial damage in hard‐segment domains during the sample deformation was responsible for the incomplete shape‐recovery of PCLUs after the first deformation, but the damage did not develop during the subsequent deformation. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 557–570, 2007     

X波段五腔渡越管振荡器的理论与实验研究

 提出了一种新结构的X波段五腔渡越管振荡器，进行了理论和实验研究。根据场分布进行了一维非线性分析，结果表明该结构可以产生高功率微波，并判断了工作模式，为TM₀₁模的3π/5模。采用粒子模拟验证了一维非线性分析的结论，并优化设计出五腔渡越管振荡器,优化结果为：输出功率约1 GW， 工作频率9.3 GHz，束波转换效率约22%。实验中，通过参数调节，得到频率约9.25 GHz，峰值功率约780 MW，脉宽（半高宽）21 ns的输出微波，束波转换效率约为16%。实验结果与模拟结果基本符合。     

Synthesis, morphology and random laser action of ZnO nanostructures

Three-dimensional (3-D) ZnO random-wall nanostructures and one-dimensional (1-D) ZnO nanorods were prepared on silicon substrates by a simple solid-vapour phase thermal sublimation technique. Optical pumped random lasing has been observed in the ZnO random-wall arrays with a threshold intensity of 0.38 MW/cm² in the emission wavelength from 380 to 395 nm. The optical gain was attributed to the closed-loop scattering and light amplification of the ZnO random-wall. The experimental result suggests that the morphology of nanostructure is the key factor to effect random lasing.     

A two step algorithm for solving a large scale semi-definite logit model

This paper proposes a two step algorithm for solving a large scale semi-definite logit model, which is appreciated as a powerful model in failure discriminant analysis. This problem has been successfully solved by a cutting plane (outer approximation) algorithm. However, it requires much more computation time than the corresponding linear logit model. A two step algorithm to be proposed in this paper is intended to reduce the amount of computation time by eliminating a certain portion of the data based on the information obtained by solving an associated linear logit model. It will be shown that this algorithm can generate a solution with almost the same quality as the solution obtained by solving the original large scale semi-definite model within a fraction of computation time.     

Thermal behavior of the maleic anhydride modified poly(3-hydroxybutyrate)

Poly(3-hydroxybutyrate), PHB has been structurally modified through reaction with maleic anhydride, MA. Transesterification reaction was carried out fixing the PHB and MA and besides time and temperature the concentration of the triethylamine (used as catalyst) was changed. Glass transition, melting and crystallization temperature obtained from DSC curves and thermal degradation temperatures obtained from TG traces were used to evaluate the influence of the reaction conditions on the modification of PHB according to factorial design. On the base of the results the optimum conditions are to perform the PHB modification reaction with MA reaction at 110°C for 1 h with 5% v/v triethylamine.     

Oxidative Coupling of Thiols to Disulfides with Ti(IV) in the Presence of NaI under Air Atmosphere

Ti(IV) as TiCl₃(O₃SCF₃) and TiO(O₂CCF₃)₂ are used as efficient catalysts for oxidative coupling of aliphatic, aromatic and heteroaromatic thiols to their disulfides in the presence of NaI under air atmosphere.     

非终身免疫传染病模型解的适定性

本文将讨论非终生免疫性传染病模型解的适定性及正则性；同时证明了整体解的存在，以及解对初值的连续依赖。     

Courants caractéristiques et analyse de SEREigen currents and RCS analysis

In this Note, we return to the theory of characteristic modes which was introduced 30 years ago for electromagnetic scattering problems. A simple mathematical framework is proposed and complete definitions are given. The potential interest of this theory in terms of Radar Cross Section (RCS) analysis is then discussed, especially in the low frequency case. Finally, a 3-D example is presented to illustrate the efficiency of this decomposition. To cite this article: Y. Morel et al., C. R. Mecanique 332 (2004).     

中子俘获瞬发γ射线数据评价(英文)

简要地介绍了中子俘获瞬发γ射线数据及其衰变纲图的评价方法技术、主要程序及其功能、数据评价流程、强度平衡检验，以及对A=1-44的稳定核素和A>190的部分稳定核素的热中子俘获瞬发γ射线数据及其衰变纲图评价的具体应用.The method of prompt γ-ray data evaluation for neutron capture and how to calculate the prompt γ-ray intensities of neutron capture have been briefly presented. The prompt γ-ray data of thermal-neutron capture of some stable nuclei for A=1-44 and A>190 have been evaluated. The ENSDF format has been adopted. The checks of intensity balance and format have been made. The examples are given to illustrate its application.