特种纤维素酶催化水解壳聚糖及壳寡糖的制备研究

用凝胶渗透色谱法研究了特种纤维素酶催化水解过程中的分子量及其分布,制备了不同低分子量的壳聚糖和壳寡糖,详细研究了水解温度、pH值、时间和酶的用量等因素对酶催化水解产物的分子量及其分布的影响,制备壳寡糖的反应条件为壳聚糖质量分数w=0．01,水解温度58℃,pH=5．3,特种纤维素酶w=0．10,反应时间3h。     

烷烃同系物气相色谱保留指数的分子拓扑研究

定义了分子中原子的平衡电负性,并用原子的平衡电负性对分子图进行着色,在距离矩阵的基础上结合分子中各原子的支化度构建了一种新的拓扑指数N1,N2和N3。该拓扑指数对分子结构实现惟一性表征,具有优良的结构选择性。将拓扑指数N1,N2和N3与烷烃在固定相角鲨烷(柱温50　℃)及SE-30(柱温80　℃)上的气相色谱保留指数进行多元线性回归,结果表明烷烃的气相色谱保留指数可分别定量描述为I(Squalane)=23.97842N1-3.86562N2+0.787379N3+42.33061,I(SE-30)=23.83937N1-3.5687N2+0.939876N3+22.11952。用上述回归方程对烷烃的气相色谱保留指数进行预测,结果表明预测值与实验值的平均相对误差均为1.31%,预测结果误差在实验误差范围内。     

利用凝胶渗透色谱示差-紫外检测器联用测定丁苯共聚物的组成分布

将凝胶渗透色谱(GPC)中的示差与紫外检测器联用,测定了无规共聚丁苯橡胶和SBS三元嵌段共聚物中各级分的组成变化.实验方法选择中对比了两种浓度参数的确定方法,发现通过改变注射量来实现浓度变化的方法优于使用系列浓度样品的方法.分别测定标准样品在紫外和示差检测器上信号产生的时间间隔可以确定两个检测器上信号的时间差.根据紫外-示差检测器联用可以看到SBR无规共聚物和三嵌段SBS共聚物样品中每一个级分中随着相对分子质量的变化,苯乙烯含量的变化.     

反相液相色谱作用指数温度效应的研究

本文研究了反相液相色谱作用指数C的温度效应对给定溶质、温度升高,C值降低;并符合近似的状态方程。在此基础上预测了不同温度、不同冲洗剂浓度的溶质下保留值、预测值与实测值基本一致。     

硫醇和硫醚的沸点与分子结构之间关系的拓扑化学研究

根据分子拓扑学原理, 用染色因子标识原子性质的差异, 发展了一种适用于含原子分子体系结构性能关系研究的新方法。据此探讨了硫醇和硫醚的沸点与分子结构之间的关系, 提出一个既能合理表征结构性能关系, 又能预测沸点的定量关系式。     

不饱和烃的理化性质与分子拓扑指数的关系研究

定义并分别求算了不饱和烃(烯烃、炔烃、烷基苯)的价键连通性指数和价键信息拓扑指数, 将拓扑指数分别与这些物质的标准生成热、标准熵、标准生成自由能等一系列理化性质相关联, 用计算机回归方法确定了不同性质的最佳函数形式。回归的复相关系数和重新计算的误差结果显示拓扑指数与理化性质具有优良的相关性。     

Topochemical models for anti-HIV activity of 1-alkoxy-5-alkyl-6-(arylthio)uracils

Relationship between topochemical indices and anti-HIV-1 (HTLV-III) inhibitory activity of 1-alkoxy-5-alkyl-6-(arylthio)uracils has been studied. Superadjacency, an adjacency-cum-distance-based, topochemical index and Wiener’s, a distance-based, topochemical index were calculated for a set of 36 1-alkoxy-5-alkyl-6-(arylthio)uracils. Resulting data were analyzed and suitable models were developed after identification of the active ranges. Subsequently, a biological activity was assigned to each of the compounds using these models and compared with the reported anti-HIV-1 activity. High accuracy of prediction was observed using these models. Statistical analysis revealed significance of the proposed models as well as a lack of correlation between the topochemical indices employed for the chosen data set.     

Magnetically Enhanced 15 kHz Glow Discharge of Methane

This work deals with the luminous chemical vapour deposition (plasma polymerization) of hydrocarbon polymeric thin films in a magnetic field enhanced discharge of methane. The films were deposited on 4″ <111> single crystal silicon substrates. We investigated the influence of the different glow discharge parameters (e.g. pressure, flow rate, power input, etc.) on the deposition rate of methane and the refractive index of the resulting polymeric films, as well as the distribution of these parameters across the wafer. We used a Shinko Seiki Plasma Polymerization equipment with a bell jar reactor comprising two electrodes connected to a symmetric AC power supply of 15 kHz. Two magnetrons were formed by placing two circular shaped concentric magnetic poles behind each electrode. The substrates were attached on both sides of a rotating wheel held at a floating potential in the middle of the two electrodes. This equipment allowed us to vary a single parameter and keep the other parameters constant over the whole process. We measured the thickness and the refractive index and their distribution over the wafer. The effect of the system pressure, decoupled from the effect of flow rate, is explained by the characteristic nature of luminous gas phase and by the polymerization/deposition mechanism of luminous chemical vapour deposition.     

Recent research progress in wettability of colloidal crystals

The wettability of solid surfaces has attracted extensive interest in both theoretical research and industrial applications. This paper reviews recent research progress in the fabrication and applications of the colloidal crystals with special wettability. Based on the modified equation of Wenzel and Cassie, the colloidal crystals with special wettability have been obtained by either application of the intrinsic rough structure or modification of the surface chemical composition. Some typical applications o...     

含磷聚酰亚胺纤维的制备及其力学与阻燃性能

采用廉价的三苯基氧膦和混酸合成了一种含磷二胺单体,二（3-氨基苯基）苯基膦氧(DAPPO)。在4,4′-二胺基二苯醚（ODA）、3,3′,4,4′-联苯四酸二酐（BPDA）和均苯四酸二酐（PMDA）聚合体系中引入该单体,制备含磷聚酰亚胺纤维。热失重分析（TGA）结果表明,聚酰亚胺纤维的热稳定性随含磷量的增加而明显提高。当n（DAPPO）：n（ODA）为7：93时,纤维的极限氧指数达到了43,说明纤维的阻燃性能显著提高。