A Branched Pore Model Analysis for the Adsorption of Acid Dyes on Activated Carbon

A new branched-pore adsorption model has been developed using an external mass transfer coefficient, K _f, an effective diffusivity, D _eff, a lumped micropore diffusion rate parameter, K _b, and the fraction of macropores, f, to describe sorption kinetic data from initial adsorbent-adsorbate contact to the long-term adsorption phase. This model has been applied to an environmental pollution problem—the removal of two dyes, Acid Blue 80 (AB80) and Acid Red 114 (AR114), by sorption on activated carbon. A computer program has been used to generate theoretical concentration-time curves and the four mass transfer kinetic parameters adjusted so that the model achieves a close fit to the experimental data. The best fit values of the parameters have been determined for different initial dye concentrations and carbon masses. Since the model is specifically applicable to fixed constant values of these four parameters, a further and key application of this project is to see if single constant values of these parameters can be used to describe all the experimental concentration-time decay curves for one dye-carbon system.The error analysis and best fit approach to modeling the decay curves for both dye systems show that the correlation between experimental and theoretical data is good for the fixed values of the four fitted parameters. A significantly better fit of the model predictions is obtained when K _f, K _b and f are maintained constant but D _eff is varied. This indicates that the surface diffusivity may vary as a function of surface coverage.     

离散小波变换-遗传算法-交互检验法用于近红外光谱数据的高倍压缩与变量筛选

用遗传算法(GA)与交互检验(CV)相结合建立了一种用于对近红外光谱(NIR)数据及其离散小波变换(DWT)系数进行变量筛选的方法，并应用于烟草样品中总挥发碱和总氮的同时测定。结果表明：NIR数据经DWT压缩为原始大小的3．3％时基本没有光谱信息的丢失；有效的变量筛选可以极大地减少模型中的变量个数，降低模型的复杂程度，改善预测的准确度。     

Distributed Gaussian discrete variable representation

A discrete variable representation (DVR) made from distributed Gaussians g_n(x) = e, (n = ?∞, …, ∞) and its infinite grid limit is described. The infinite grid limit of the distributed Gaussian DVR (DGDVR) reduces to the sinc function DVR of Colbert and Miller in the limit c → 0. The numerical performance of both finite and infinite grid DGDVRs and the sinc function DVR is compared. If a small number of quadrature points are taken, the finite grid DGDVR performs much better than both infinite grid DGDVR and sinc function DVR. The infinite grid DVRs lose accuracy due to the truncation error. In contrast, the sinc function DVR is found to be superior to both finite and infinite grid DGDVRs if enough grid points are taken to eliminate the truncation error. In particular, the accuracy of DGDVRs does not get better than some limit when the distance between Gaussians d goes to zero with fixed c, whereas the accuracy of the sinc function DVR improves very quickly as d becomes smaller, and the results are exact in the limit d → 0. An analysis of the performance of distributed basis functions to represent a given function is presented in a recent publication. With this analysis, we explain why the sinc function DVR performs better than the infinite grid DGDVR. The analysis also traces the inability of Gaussians to yield exact results in the limit d → 0 to the incompleteness of this basis in this limit. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Determination of binding constants and stoichiometries for platinum anticancer drugs and serum transport proteins by capillary electrophoresis using the Hummel-Dreyer method

A CE method has been developed to evidence and quantitatively characterize the interaction between platinum-based antitumor drugs and human serum proteins. This method is a variant of affinity CE modified regarding both experimental setup and data treatment so as to measure the peaks (or vacancies) that correspond to the bound drug when it slowly binds to the protein. Using the formalism of the Hummel-Dreyer method and cisplatin and oxaliplatin as test compounds, a protocol for determining albumin and transferrin binding constants and stoichiometries, including (and distinguished by) 48 hours of incubation of the reaction mixture, was elaborated. Relative affinities of drugs toward different proteins in aqueous solution at physiological pH, chloride concentration, and temperature were compared in terms of overall binding constants and numbers of drug molecules attached to the protein. The results indicate that both platinum drugs bind to albumin more strongly than to transferrin, supporting the concept that the albumin fraction is a major drug supply route for chemotherapeutical needs. From a comparison with the binding parameters measured previously for cisplatin by other methods, conclusions were drawn about the validity of CE as a simple and convenient method for assaying protein-drug reactions with slow kinetics.     

Semi‐classical formulation of time‐dependent discrete variable representation method

In this article, we apply a novel time‐dependent discrete variable representation (TDDVR) method proposed by Barkakaty and Adhikari to investigate tunneling through an Eckart barrier. This semi‐classical method is theoretically rigorous and straightforward to implement. Among the TDDVR formulations, this report presents the first derivation of a rigorous form of quantum force (QF) for the present perspective. The validity of this semi‐classical approach is demanded based on the excellent agreement of the tunneling probability with the corresponding quantum results. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2004     

Fermentation characteristics and the dynamic trend of chemical components during fermentation of Massa Medicata Fermentata

As a representative of traditionally fermented Chinese medicine, Massa Medicata Fermentata (MMF) shows the functions of invigorating the spleen and stomach and promoting digestion, which plays an important role in the treatment of gastrointestinal diseases. The fermentation mechanism and the key factors that affect the quality of MMF have not been revealed yet, which has become an urgent issue that limits its clinical application. This article aims to systematically and comprehensively reveal the transformation of physical properties and the dynamic trend of chemical components including substrate components, volatile components, and lactic acid as anaerobic fermentation product during MMF fermentation. Along with obvious hyphae growth observed for MMF, the weight of MMF decreased, and the moisture and temperature increased. Through the quantified 14 components from substrate, ferulic acid increased from 45.53 ± 6.94 to 141.89 ± 78.40 μg/g, while glycosides and phenolic acids declined except caffeic acid. Also, within the 66 volatile components analyzed, alcohols and acids increased, while aldehydes and ketones decreased. Lactic acid was not detected in the fermentation substrate, but an apparent increase in lactic acid content was observed along with the increased fermentation days, resulting in 2.54 ± 0.15 mg/g on day 8. Based on the tested components, the fermentation process of MMF was discriminated into three distinct stages by principal component analysis, and an optimal fermentation time of four days was proposed. The results of this study will be of great significance to clarify the characteristics of fermentation and conduce to improving quality standards of MMF.     

A High-Order Finite Difference Scheme for 3D Unsteady Convection Diffusion Reaction Equations北大核心CSCD

针对三维非稳态对流扩散反应方程,构造了一种高精度紧致有限差分格式,对空间的离散采用四阶紧致差分方法,对时间的离散采用Taylor级数展开和余项修正技术,所提格式在时间上的精度为二阶、在空间上的精度为四阶。利用Fourier稳定性分析法证明了该格式是无条件稳定的。最后给出数值算例验证了理论结果。     

Investigation of electrochemical reactions on copper electrode in Cu4RbCl3I2 solid electrolyte

Investigations are carried out by potentiostatic method. It is found that at potentials ϕ less than 100 mV, a reaction rate of copper deposition is limited by the formation and the three-dimensional growth of copper nuclei and the rate of copper dissolution is limited by a two-dimensional growth of holes in the metal. The rate of nucleus growth was evaluated at 10⁻⁹...10⁻⁶ μm s⁻¹ depending on the potential. At ϕ>120 mV, the reaction rate is limited by charge transport at the exchange current density of 2.7 mA cm⁻² and the anodic transfer coefficient α_a≈ 0.45. The accumulation of a divalent copper phase on Cu/Cu₄RbCl₃I₂ interface at anodic polarization is explained by a parallel course of Cu⁺ − e → Cu²⁺ reaction.     

Intercalation assembly of kojic acid into Zn-Ti layered double hydroxide with antibacterial and whitening performances

The inhibitor of melanin and the bacteriostatic agent kojic acid was inserted into Zn-Ti layered double hydroxide (LDH) by anion-exchange reaction. The structure, slow release, antibacterial and skin whitening activity were studied.