Shock-wave equation-of-state studies at Los Alamos

A history of the shock-wave equation-of-state (EOS) studies at Los Alamos is given. Particular emphasis is placed on the pioneering research in the 1950s where many of the experimental techniques and methods of analysis were developed, which we now take for granted. A brief review of shock-wave physics is given, which illustrates important hydrodynamic and thermodynamic concepts. Recent studies on the EOS of Ti are presented with emphasis on the-to- phase transition. VISAR wave profiles for polycrystalline Ni and singlecrystal Ni are presented to determine the strengths of these materials under pressure. Low-density polystyrene foam Hugoniot experiments are described and results analyzed.This article was processed using Springer-Verlag T_EX Shock Waves macro package 1990.     

Transport phenomena in a plane shock wave

With the use of the nonpolynomial closure 1/ _z in the Mott-Smith approximation of the solution of the Boltzmann equation, we obtain a value of the density gradient in the limit of a very weak shock wave that is close to the correct value. For the determination of the transverse temperature gradient we calculated the _x ² / _z moment of the Mott-Smith collision integral. The effective values of viscosity and thermal conductivity in the limit of a very weak shock wave were calculated for inverse-power potentials and found to agree almost exactly with the Chapman-Enskog values. Such a comparison can serve as a criterion for the evaluation of different bimodal theories. Various bimodal theories give different values of viscosity and thermal conductivity, but all of them give 33 % too high a value of the Eucken ratio.     

Shock cooling of liquid nitrogen and superfluid helium

Abstract

Superfluid Helium (11) and liquid nitrogen are the only liquids which have been shown experimentally, to exhibit shock cooling. In the present paper we use the Landau model to demonstrate theoretically that the roton gap, which decreases with increasing density, plays the same role leading to shock cooling in liquid helium as the dissociation energy does in liquid nitrogen.     

Shock wave research for engineering physics

Abstract

In this paper, several recent activities on shock wave research for engineering physics performed in China will be presented as the supplement of author's previous report of Ref. 1.     

Ignition delay times of methane and hydrogen highly diluted in carbon dioxide at high pressures up to 300 atm

The need for more efficient power cycles has attracted interest in super-critical CO₂ (sCO₂) cycles. However, the effects of high CO₂ dilution on auto-ignition at extremely high pressures has not been studied in depth. As part of the effort to understand oxy-fuel combustion with massive CO₂ dilution, we have measured shock tube ignition delay times (IDT) for methane/O₂/CO₂ mixtures and hydrogen/O₂/CO₂ mixtures using sidewall pressure and OH* emission near 306?nm. Ignition delay time was measured in two different facilities behind reflected shock waves over a range of temperatures, 1045–1578?K, in different pressures and mixture regimes, i.e., CH₄/O₂/CO₂ mixtures at 27–286 atm and H₂/O₂/CO₂ mixtures at 37–311 atm. The measured data were compared with the predictions of two recent kinetics models. Fair agreement was found between model and experiment over most of the operating conditions studied. For those conditions where kinetic models fail, the current ignition delay time measurements provide useful target data for development and validation of the mechanisms.     

LABVIEW下冲击试验测试信号分析模块的设计

根据GJB冲击环境试验测试要求,介绍LABVIEW平台下两类典型冲击信号分析模块的设计方法,主要讲述利用多图层叠加编程技术实现GJB150.18-1986标准规定的半正弦波与后峰锯齿波动态套容差曲线分析模块的设计以及利用递归算法实现冲击响应谱分析模块的设计。其次,采用资源DLL封装技术对LABVIEW编程实现的冲击信号分析模块进行封装,在其他编程语言中调用DLL实现冲击信号分析模块在其他编程语言中的功能链接。实践表明,LABVIEW图形化编程技术可快速实现两类冲击信号分析模块的设计,将高速数据采集模块与冲击信号分析模块集成,可有效完成冲击试验测试与信号分析处理任务。     

High-temperature measurements of the rates of the reactions CH2O + Ar → Products and CH2O + O2 → Products

The two-channel thermal decomposition of formaldehyde [CH₂O], (1a) CH₂O + Ar → HCO + H + Ar, and (1b) CH₂O + Ar → H₂ + CO + Ar, was studied in shock tube experiments in the 2258-2687 K temperature range, at an average total pressure of 1.6 atm. OH radicals, generated on shock heating trioxane-O₂-Ar mixtures, were monitored behind the reflected shock front using narrow-linewidth laser absorption. 1,3,5 trioxane [C₃H₆O₃] was used as the CH₂O precursor in the current experiments. H-atoms formed upon CH₂O and HCO decomposition rapidly react with O₂ to produce OH via H + O₂ → O + OH. The recorded OH time-histories show dominant sensitivity to the formaldehyde decomposition pathways. The second-order reaction rate coefficients were inferred by matching measured and modeled OH profiles behind the reflected shock. Two-parameter fits for k_1a and k_1b, applicable in this temperature range, are:

     

动态加载过程中石英玻璃诱导水的快速结晶相变

在气炮加载试验中利用弹载光源原位测试技术,观测了夹于石英玻璃之间的水在动态压缩过程中的透光特性. 通过其光透射特性研究了水的冲击相变. 实验结果发现液态水在动态冲击压缩过程中, 其压力低于2 GPa 就出现透明性变差的现象,而且水的透明性下降与石英玻璃的存在有关,是一种石英诱导水的结晶相变现象.     

Wave-based analysis of dual acoustic black holes for anechoic termination of shock testing devices

Shock testing is an important issue for the survivability of an equipment under shock environment in aerospace and military industries. One of the problems faced in conventional shock testing devices is the need for redesigning of the geometry whenever the responses to different shock environments are tested. To circumvent the redesigning processes, a structure with two ‘acoustic black holes (ABHs)’ on both ends, referred to as the beam with dual ABHs, is proposed as a shock testing device. The beam with dual ABHs is capable of simulating diverse shock environments by controlling the applied force because it can be regarded as an infinite beam at high frequency range with the aid of the anechoic terminations by the ABHs. To systematically investigate the beam with dual ABHs, we develop a wave-based method that uses the reflection matrix of an ABH to perform free and forced vibration analyses. From the analyses on frequency response function and shock response spectrum of the beam with dual ABH, it is suggested that the beam with dual ABHs is feasible as a semi-permanent shock testing device.     

Jordan–Cattaneo waves: Analogues of compressible flow

We review work of Jordan on a hyperbolic variant of the Fisher–KPP equation, where a shock solution is found and the amplitude is calculated exactly. The Jordan procedure is extended to a hyperbolic variant of the Chafee–Infante equation. Extension of Jordan’s ideas to a model for traffic flow are also mentioned. We also examine a diffusive susceptible–infected (SI) model, and generalizations of diffusive Lotka–Volterra equations, including a Lotka–Volterra–Bass competition model with diffusion. For all cases we show how a Jordan–Cattaneo wave may be analysed and we indicate how to find the wavespeeds and the amplitudes. Finally we present details of a fully nonlinear analysis of acceleration waves in a Cattaneo–Christov poroacoustic model.