SHAPE MEMORY EFFECT OF PU IONOMERS WITH IONIC GROUPS ON HARD-SEGMENTS

SMPU （shape memory polyurethane） non-ionomers and ionomers, synthesized with poly（c-caprolactone） （PCL）, 4, 4＇-diphenylmethane diisocyanate （MDI）, 1,4-butanediol （BDO）, dimethylolpropionic acid （DMPA） were measured with cyclic tensile test and strain recovery test. The relations between the structure and shape memory effect of these two series were studied with respect to the ionic group content and the effect of neutralization. The resulting data indicate that, with the introduction of asymmetrical extender, the stress at 100% elongation is decreased for PU non-ionomer and ionomer series, especially lowered sharply for non-ionomer series; the fixation ratio of ionomer series is not affected obviously by the ionic group content; the total recovery ratio of ionomer series is decreased greatly. After sufficient relaxation time for samples stretched beforehand, the switching temperature is raised slightly, whereas the recovery ratio measured with strain recovery test method is lowered with increased DMPA content. The characterization with FT-IR, DSC, DMA elucidated that, the ordered hard domain of the two series is disrupted with the introduction of DMPA which causes more hard segments to dissolve in soft phase; ionic groups on hard segment enhance the cohesion between hard segments especially at high ionic group content and significantly facilitate the phase separation compared with the corresponding non-ionomer at moderate ionic group content.     

POLYMER NETWORK-POLY(ETHYLENE GLYCOL)COMPLEXES WITH SHAPE MEMORY EFFECT

The complexes of poly(methacrylic acid-co-methyl methacrylate) network with poly(ethylene glycol) stabilized byhydrogen bonds were prepared. By introducing the poly(ethylene glycol), a large difference in storage modulus below andabove the glass transition temperature occurred and the complexes exhibited shape memory behaviors. The morphology ofcomplexes was studied by using DSC, WAXD, and DMA. The results indicate that the fixed phase of this kind of novelshape memory materials is the network, and the reversible phase is the amorphous state of PEG:PMAA complex phase. Theshape recoverability almost reaches 100%. This type of complexes can be regarded as a novel shape memory network.     

形状记忆高分子材料

作为一种新型的功能材料,形状记忆高分子不仅具有形变量大、赋形容易、形状恢复温度便于调整、加工方便的优点,而且种类丰富、质轻价廉.按形状记忆的方式,它可分为热致感应型、光致感应型和化学物质感应型等,能满足不同的应用需求.     

可变色形状记忆材料

以聚乙烯醇和单宁酸为原料制备出了形状记忆水凝胶,以乙二胺四乙酸、二水合氯化铜、六水合氯化镁、氧化铝为原料制备出了无机热致变色材料,以结晶紫内酯、硼酸、十六醇为原料制备出了有机热致变色材料,并将形状记忆材料与热致变色材料结合,成功制备出了两种既能记忆形状又能变色的新型复合高分子材料。本实验原料简单易得,方法简便,并与本科阶段有机化学、无机化学、仪器分析、精细化学品化学等课程中所学习的自由基聚合反应、化学交联、络合反应等知识结合,可作为本科教学的一个综合实验,提高学生的动手能力,激发学生学习化学的兴趣和热情。     

Characterization of colloidal hematite particle shape and dispersion behavior

An elliptically polarized light scattering (EPLS) technique for the size and shape characterization of ellipsoidal hematite particles is presented. The hematite particles are synthesized by aging aqueous FeCl(3) or Fe(NO(3))(3) solutions at 100 degrees C. Different reaction conditions create particles of aspect ratios between 1 (spherical) and 8 (elongated). Cross-sectional diameter and aspect ratio are observed as a function of reaction (aging) time. Growth of the elongated particles, as well as their fractal aggregation behavior, is characterized using EPLS and comparisons are made with photon correlation spectroscopy and TEM measurements.     

Evaluation of the surface tension measurement of axisymmetric drop shape analysis (ADSA) using a shape parameter

A quantitative criterion called “shape parameter” to evaluate the quality of surface tension measurement of Axisymmetric Drop Shape Analysis (ADSA) is presented. ADSA is a powerful technique for the measurement of interfacial tensions and contact angles of pendant drops, sessile drops, and bubbles. Despite the general success of ADSA, deficient results may be obtained for drops close to spherical shape. Therefore, the “shape parameter” was used to determine the range of drop shapes in which ADSA succeeds or fails. The “shape parameter” is a dimensionless parameter that expresses quantitatively the difference in shape between a given experimental profile and an inscribed circle. The surface tension measurements of ADSA were evaluated for both pendant drop and constrained sessile drop configurations using the shape parameter. Different shapes of the pendant drop were studied using different sizes and materials of holders. For each drop configuration, a “critical shape parameter” was defined based on the minimum value of the shape parameter that guarantees an error of less than ±0.1 mJ/m². Furthermore, the effects of the type of liquid and constellation on the “critical shape parameter” were studied.     

Design,Synthesis, and Optical/Electronic Properties of a Series of Sphere-Rod Shape Amphiphiles Based on the C60-oligofluorene Conjugates

A series of sphere-rod shape amphiphiles were designed and synthesized by connecting the rod-like oligofluorenes with different lengths(OF_n) to the different positions of the spherical [60]fullerene(C_(60)) through a rigid linkage. The conjugates were characterized by ~1H-NMR, ~(13)C-NMR, FTIR, EA and MALDI-TOF mass spectrometry. The optical and electronic properties of the conjugates were studied by UV-Vis absorption spectroscopy, fluorescence spectrometry, and cyclic voltammetry. The results from UV-Vis absorption spectroscopy and cyclic voltammetry indicated that the energy profiles of C_(60) and OF_n remained unchanged when different lengths of OF_n were attached to C_(60). The electron affinities of the OF_n-C_(60) conjugates were close to that of C_(60), while slight electronic interaction was found between the two individual chromophores(C_(60) and OF_n) in their ground states. The fluorescence spectra exhibited a complete fluorescence quenching in the toluene solution, suggesting an effective energy transfer from OF_n to C_(60). It presents a systematic study on the selfassembly, structure-property relationship, and potential technical applications of the conjugates.     

聚甲基丙烯酸甲酯/星形聚乙二醇半互穿聚合物网络的形状记忆性能和分子机理

采用非共价复合方法,设计并合成了具有星形结构的聚甲基丙烯酸甲酯/星形聚乙二醇半互穿聚合物网络(PMMA/SPEG)和聚甲基丙烯酸甲酯/线性聚乙二醇半互穿聚合物网络(PMMA/LPEG).研究了PEG分子量对PMMA/SPEG和PMMA/LPEG的热性能、机械性能、动态机械性能和形状记忆性能的影响.结果表明,与PMMA/LPEG相比,星形结构的嵌入显著提高了PMMA/SPEG复合物的机械性能、形状回复率和回复速度.采用Edwards管道模型理论对其形状记忆效应的分子机理进行了阐释,利用材料的应力松弛特性对机理分析进行了验证.     

Stress-Strain Behavior of Shape Memory Polymers by 1WE Method: Application to Tecoflex®

Thermomechanical cycles including programming, cooling, unloading and heating to trigger the 1WE were examined for a shape memory polymer (SMP), Tecoflex® (TFX EG-72D). Cycles were performed at 60°C with 50% and 225% strains and the recovery time of 10 min. Strains evolving with time were estimated during the thermomechanical treatments for the total 44 cycles using 50% strains and the total 50 cycles using 225% strains. Recovery ratios for 50% strains and 225% were also estimated. It turns out that programming, cooling, unloading and heating to trigger the 1WE causes an increase of irreversible strain and is associated with a corresponding decrease of the intensity of the 1WE in particular during the first thermomechanical cycles. In parallel scanning electron microscopic study using secondary electron imaging shows a very slight wavy surface structure evolved during cycling.     

Existence analysis of an optimal shape design problem with non coercive state equation

In this paper, a shape optimization problem, modelling a welding process, governed by a second order non coercive PDE is considered. The well posedness of the shape optimal design problem is showed using the degree of Leray–Schauder. Then the existence of an optimal solution is proved.