Surface recombination in breakdown time delay experiments: Effect of different cathode materials

The late afterglow in nitrogen with iron electrode is studied by the breakdown time delay method, i.e., by measuring the breakdown time delay t_d as a function of the afterglow time . It is proposed that the cause of the secondary electrons initiating the breakdown is the energy of the surface recombination of nitrogen atoms on the iron electrode. The gas-phase and macrokinetic diffusive models are used to describe the experimental breakdown time delay data. By fitting the theoretical curve to the experimental data: (1) it has been confirmed that the recombination on the molybdenum glass is of the second order and the value of the surface recombination coefficient is determined at 4 mbar; (2) it has been shown that the surface recombination on the iron electrode is of the second order, and the effective recombination coefficients are determined; (3) the analytical form of the recombination coefficient as a function of the adsorption characteristics of surfaces and the pressure of the parent gas has been derived. In addition, the orders of surface recombination on the molybdenum-, aluminum-, and gold-plated electrode were determined by the same method.     

Dielectric Studies of Glycine–Ethylene Glycol–Water Solutions Using Time Domain Reflectometry

Time domain reflectometry (TDR) has been used for dielectric relaxation measurements on the glycine–ethylene glycol–water ternary system (TDR) at 25, 30, 35, and 40°C in the frequency range from 10 MHz to 10 GHz. Glycine–ethylene glycol–water solutions are prepared with different concentrations of ethylene glycol (0, 5, 10, 15, 20, and 30%) and also for different glycine molar concentrations (0, 0.2, 0.4, 0.6, 0.8, and 1 M). The dielectric relaxation parameters are measured for aqueous glycine solutions also to compare the results with those for the glycine–ethylene glycol–water ternary system. For all the solutions considered, only one relaxation peak was observed in this frequency range. The complex permittivity spectra for the aqueous glycine solutions can be well described by the Cole–Davidson expression, whereas that for the ternary system can be well described by the Havriliak–Negami expression. The logarithm of the relaxation time log() shows a nonlinear relation with the glycine molar concentration that implies a change in the relaxation mechanism with glycine concentration. The dielectric strength increases with an increase in glycine molar concentration, whereas it decreases with an increase in ethylene glycol concentration.     

Evaluation of dead time calculation in liquid chromatography using a linearization procedure for homologous series

A mathematical method for the calculation of the dead time (t_m) in HPLC was evaluated using a computer simulation approach, in which artificial perturbations were introduced to Simulated homolog retention times. The calculation was based on a modified and extended Grobler and Bálisz (GB) method. Investigated wav how the precision of the calculated t_M is affected by: statistical fluctuations in retention times and which, and how many homolog retention times are used. Based on these simulations a two-step procedure for the t_M calculation is proposed: In the first step the linearity of log t_{R, n} vs carbon number n is checked using as many homolog retention times as possible. The slope value b^o of the first linear regression in the GB method is used for the selection of homolog retention times in the final t_M calculation. In the second step the optimal selection of homologs is made and the final t_M calculation is carried out. Guidelines for homolog selection are given.     

The influence of methacryloxypropyltrimethoxysilane on the sol-gel process of TEOS

The influence of MPS on the hydrolysis and condensation process of TEOS is studied by means of hydrolysis time (t _H) and gelation time (t _G) curves. The addition of MPS to a mixture of TEOS, ethanol and water results in a substantial increase in t _G. The increase is most pronounced when adding takes place in the acid step of the sol-gel process of TEOS.In acid environment hydrolysis of MPS will be dominant compared to hydrolysis of TEOS. This results in an effective decrease of the amount of water available for the hydrolysis of TEOS. However, this decrease in water concentration cannot explain the complete effect of the addition of MPS. The hydrolysed MPS will also be incorporated in the gel network and will strongly influence the cross-linking ability. The lesser functionality of MPS compared to TEOS and the steric hindrance of the acrylate group results in a large increase in t _G.     

Optimal dynamic advertising policies for hereditary processes

In this paper, the Nerlove-Arrow model of optimal dynamic advertising policies is generalized by assuming a general probability distribution of the forgetting time, rather than the exponential one. A control problem with integrodifferential equations of motion is defined for which the transitory and steady-state properties of the optimal advertising policy are examined. The effects of assumptions like IHR-distributions and DHR-distributions, the existence of an upper bound for the forgetting time, etc., are explained. It is shown that there are two (in the case of an exponential distribution even three) different current-value adjoint functions associated with the problem, and relations between the two (three) are established. Also provided is a sensitivity analysis.Thanks are due to G. Feichtinger and S. Jorgensen for useful discussions.     

On the minimal time function for distributed control systems in Banach spaces

In this paper, it is shown that the minimal time function is locally Lipschitz continuous for the control systemx=Ax+u in a Banach spadeE, under either of two conditions:A is linear and generates aC ₀-semigroup of bounded linear operators; orA is nonlinear, possibly multivalued, and dissipative. The main tool used for the nonlinear case is a result of Barbu concerning the null controllability of the system.     

Mechanical properties and molecular mobility in oriented polyolefines

The static modulus of elasticity (E) and the correlation time of rotation ( _c ) of 2,-2,6,6-tetramethylpiperidine-1-oxyl are studied as a function of the temperature (210<T <350°K) for oriented films of isotactic polypropylene and polyethylene of high and low density.E and _c change both upon heating and polymer orientation; this result indicates that sample properties are influenced by the microstructure of the amorphous phase where probes are localized.     

MALDI-TOF-MS法对重组人内皮抑素蛋白分子质量测定

肿瘤的生长依赖于血管的生成,新生血管不仅为肿瘤生长提供必需的营养物质,而且为肿瘤细胞扩散提供了重要的途径。1997年哈佛大学的O'Reilly等发现了一种内源性新血管生成抑制因子内皮抑素(Endoscatin),显示出特异抑制激活的血管内皮细胞增殖和肿瘤新血管生成的生物学活性,其抗肿瘤作用具有高效、低毒、无耐药性的优点。目前,内皮抑素的研究引起了国内外广泛的兴趣,在美国已进行以安全性为目的的I期临床实验,国内也有多家公司对内皮抑素进行了抗肿瘤研究并申报一类新药。内皮抑素有望成为医治肿瘤而又没有化疗和放疗的毒副作用的一种新的治疗方法,但是否能作为药物应用于临床,尚需对内皮抑素的结构特点及抑制肿瘤和内皮细胞的作用机制等方面进行许多深入的研究。     

基质辅助激光解吸附飞行时间质谱分析缩合单宁的阳离子化问题

以单价金属离子Cs 和Na 作为离子化试剂,对3种缩合单宁进行基质辅助激光解吸附飞行时间(MALD I-TOF)质谱分析。加入Na 作为阳离子化试剂,能得到较高质量的质谱图。但由于实验通道中几乎不可能完全去除的K 的干扰而会高估棓儿茶酚/表棓儿茶酚单元的组成比例,从而影响对棓儿茶酚/表棓儿茶酚单元存在与否的判断;选择Cs 作为阳离子化试剂可以避免此问题,但在复杂的缩合单宁分析中,同样因为杂质离子Na 和K 的干扰而使得质谱图变得更复杂;未去离子处理直接对缩合单宁进行MALD I-TOF质谱分析与去离子并加入Cs 的处理比去离子并加入Na 能检测到更高聚合度的高聚物,检测到离子峰强度最高的聚合物随离子不同而不同。