Faster GC analyses performed by flow programming in short capillary columns

The technique of programming the carrier gas flow rate in gas chromatography, especially in connection with the use of capillary columns shorter than 10 m can significantly accelerate GC analyses. Equations for calculation of the parameters of the exponential flow function and retention data are described. The effects of flow programming in a short capillary column are shown in a few chromatograms. Different programming rates are tested and compared with temperature programming.     

Effect of chloride on heavy metal mobility of harbour sediments

To evaluate the environmental impact of polluted sediments, several operationally defined sequential extraction procedures (SEPs) have been described. Salinity has long been recognised as an important variable determining the physicochemical behaviour of heavy metals in marine sediments. Thus, in the present paper, the modified BCR-SEP has been applied to harbour sediments in order to assess to what extent trace metal mobility (Cd, Cr, Cu, Ni, Pb and Zn) could be influenced by chloride content in sediments. For this, washed (W) and non-washed (NW) sediments were compared. The relative mobility order observed for the six trace metals studied was not seen to be influenced by the presence of chloride in the sediments, but an increase of mobility was observed for Cd and Zn (the most mobile metals) when chloride was present in the sediments. Characterisation of the sediments and of the pseudo-total metal contents by means of an aqua regia extraction was also assessed.     

A model for quantitatively describing linear velocity programming in capillary SFC

Summary Linear velocity in capillary SFC is commonly controlled by restricting capillaries. In this paper, a model is described that quantitatively predicts the linear velocity of a supercritical fluid in SFC using tapered or ceramic frittype restrictors. In this model, the flow from the restricting capillary is assumed to be an isentropic expansion. The variation of the linear velocity as a function of pressure, temperature and cross-sectional area of the restricting aperture was predicted by this model. This predictive capability is important to the use of gradient programming in capillary SFC. Finally, the ideal variable restrictor for gradient programming was found to be one that could reversibly increase or decrease the linear velocity independent of the pressure, temperature, and/or density conditions used to create the gradient.     

Sequential injection analysis for benzophenone-4 and phenylbenzimidazole sulphonic acid in sunscreen sprays by solid-phase extraction coupled with ultraviolet spectrometry

A sequential injection UV method was developed to determine benzophenone-4 (BZ4) and phenylbenzimidazole sulphonic acid (PBS) simultaneously, these being the most commonly used UV-filters in aqueous formulations used as sunscreen sprays. The selective elution of both was performed by on-line solid-phase extraction, by retention on a SAX microcolumn and separation by varying the pH of elution. The sensitivity obtained was 0.042±0.001 ml μg⁻¹ for PBS and 0.0159±0.0003 ml μg⁻¹ for BZ4. The limit of detection was 1.6 μg ml⁻¹ for PBS and 0.6 μg ml⁻¹ for BZ4. The R.S.D. of the results was 1-6% for PBS and 1-12% for BZ4. The method was validated using commercial sunscreen formulations with concentrations determined by a liquid chromatographic procedure. The two procedures gave comparable results. Automation of the method means the amount of reagents used and residues generated are decreased. The system allows the required analysis sequence to be programmed using suitable software.     

Sequential injection system with higher dimensional electrochemical sensor signals Part 2. Potentiometric e-tongue for the determination of alkaline ions

An intelligent, automatic system based on an array of non-specific-response chemical sensors was developed. As a great amount of information is required for its correct modelling, we propose a system generating it itself. The sequential injection analysis (SIA) technique was chosen as it enables the processes of training, calibration, validation and operation to be automated simply. Detection was carried out using an array of potentiometric sensors based on PVC membranes of different selectivity. The diluted standard solutions needed for system learning and response modelling are automatically prepared from more concentrated standards. The electrodes used were characterised with respect to one and two analytes, by means of high-dimensionality calibrations, and the response surface of each was represented; this characterisation enabled an interference study of great practical utility. The combined response was modelled by means of artificial neural networks (ANNs), and thus it was possible to obtain an automated electronic tongue based on SIA. In order to identify the ANN which provided the best model of the electrode responses, some of the network's parameters were optimised and its usefulness in determining NH₄⁺, K⁺ and Na⁺ ions in synthetic samples was then tested. Finally, it was used to determine these ions in commercial fertilisers, the obtained results being compared with reference methods.     

Facile peptide thioester synthesis via solution-phase tosylamide preparation

Preparation of peptide thioester is essential for native chemical ligation and block condensation. Our novel methodology involves conversion of the carboxylic acid of a peptide into a thioester using p-toluenesulfonyl isocyanate, followed by alkylation, then thiol substitution. Our methodology can also be used for the preparation of glycopeptide thioesters. Furthermore, it is possible to carry out the reaction as a sequential peptide chemical ligation.     

Sequential centrifugal layer chromatography (SCLC): A new technique for the isolation of natural compounds. Part 2: Comparative study on centrifugal layer chromatography (CLC) and SCLC for the separation of furocoumarin isomers

The new sequential centrifugal layer chromatography extends the possibilities for preparative separation of furocoumarin isomers. In the present work, isobergapten, pimpinellin, bergapten, isopimpinellin, and sphondin were isolated from a prepurified extract of Heracleum sphondylium roots using two different techniques, namely, centrifugal layer chromatography (CLC) and sequential centrifugal layer chromatography (SCLC). The former technique was carried out with four plates, whereas the latter method required only one plate, using the same mobile phase in each case. A further advantage of the SCLC method was that all completely separated compounds could be quickly and efficiently eluted in small volumes of mehtanol.     

Comparative analysis of affine scaling algorithms based on simplifying assumptions

We analyze several affine potential reduction algorithms for linear programming based on simplifying assumptions. We show that, under a strong probabilistic assumption regarding the distribution of the data in an iteration, the decrease in the primal potential function will be with high probability, compared to the guaranteed(1). ( 2n is a parameter in the potential function andn is the number of variables.) Under the same assumption, we further show that the objective reduction rate of Dikin's affine scaling algorithm is with high probability, compared to no guaranteed convergence rate.Research supported in part by NSF Grant DDM-8922636.     

Improving the rate of convergence of interior point methods for linear programming

This paper proposes a procedure for improving the rate of convergence of interior point methods for linear programming. If (x ^k ) is the sequence generated by an interior point method, the procedure derives an auxiliary sequence ( ). Under the suitable assumptions it is shown that the sequence ( ) converges superlinearly faster to the solution than (x ^k ). Application of the procedure to the projective and afflne scaling algorithms is discussed and some computational illustration is provided.     

Efficient algorithms for solving rank two and rank three bilinear programming problems

Finitely convergent algorithms for solving rank two and three bilinear programming problems are proposed. A rank k bilinear programming problem is a nonconvex quadratic programming problem with the following structure: % MathType!MTEF!2!1!+-% feaafeart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr% 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4baFfea0dXde9vqpa0lb9% cq0dXdb9IqFHe9FjuP0-iq0dXdbba9pe0lb9hs0dXda91qaq-xfr-x% fj-hmeGabaqaciGacaGaaeqabaWaaeaaeaaakeaaieaacaWFTbGaa8% xAaiaa-5gacaWFPbGaa8xBaiaa-LgacaWF6bGaa8xzaiaa-bcacaWF% 7bacbiGaa43yamaaDaaaleaacaGFWaaabaGaa4hDaaaakiaa+Hhaca% GFRaGaa4hzamaaDaaaleaacaGFWaaabaGaa4hDaaaakiaa+LhacaGF% RaWaaabuaeaacaGFJbWaa0baaSqaaiaa+PgaaeaacaGF0baaaOGaam% iEaiabl+y6NjaadsgadaqhaaWcbaGaamOAaaqaaiaadshaaaGccaWG% 5bGaaiiFaaWcbaGaa8NAaiaa-1dacaWFXaaabeqdcqGHris5aOGaa4% hEaiabgIGiolaa+HfacaGFSaGaa4xEaiabgIGiolaa+LfacaWF9bGa% a8hlaaaa!5D2E!\[minimize \{ c_0^t x + d_0^t y + \sum\limits_{j = 1} {c_j^t xd_j^t y|} x \in X,y \in Y\} ,\]where X Rⁿ¹ and Y R ⁿ² are non-empty and bounded polytopes. We show that a variant of parametric simplex algorithm can solve large scale rank two bilinear programming problems efficiently. Also, we show that a cutting-cake algorithm, a more elaborate variant of parametric simplex algorithm can solve medium scale rank three problems.This research was supported in part by Grant-in-Aid for Scientific Research of the Ministry of Education, Science and Culture, Grant No. 63490010.