Flow and Sequential Injection Manifolds for the Spectrophotometric Determination of Captopril Based on its Oxidation by Fe(III)

 Two new simple and rapid methods are reported for the accurate and precise spectrophotometric determination of captopril (CPL) using flow (FI) and sequential injection (SI) analysis. The methods are based on the fast oxidation of CPL by Fe(III). The produced Fe(II) reacts with 2,2′-dipyridyl-2-pyridylhydrazone (DPPH) in acidic medium to form a colored complex which is monitored spectrophotometrically at 535 nm. Both methods allow the determination of the analyte up to 1000 mg L⁻¹ at a sampling rate of 120 and 60 injections per hour for FI and SI, respectively. The methods are very precise [s _r=0.8 and 1.2% at 500 mg L⁻¹ CPL (n=12) for FI and SI, respectively] and the 3σ detection limits (c _L=4.0 and 7.0 mg L¹, respectively) are quite satisfactory. Their application to a variety of anti-hypertensive commercial pharmaceutical formulations showed excellent results (relative errors, e _r, < ± 1.6% in all cases compared to an official HPLC method), while common pharmaceutical excipients were found not to interfere. Recovery experiments further verified the accuracy of the developed methods, as the percent recoveries were in the range of 98.1–102.5%. Author for correspondence. E-mail: themelis@chem.auth.gr Received May 9, 2002; accepted January 8, 2003 Published online May 5, 2003     

含氧光敏引发体系的研究——Ⅵ.二苯酮/三乙胺体系引发光聚合过程中的再次引发效应

过去,作者曾发表了多种光敏引发体系引发烯类单体光聚合的工作,在研究2,2-二甲氧基苯乙酮在氧存在下引发甲基丙烯酸甲酯光聚合时,结合在聚合物链端的引发剂碎片具有光化学活性,在光聚合反应中产生高分子自由基,发生再次聚合,出现高分子量     

Dynamic optimization problems with bounded terminal conditions

Bounded terminal conditions of nonlinear optimization problems are converted to equality terminal conditions via the Valentine's device. In so doing, additional unknown parameters are introduced into the problem. The transformed problems can still be easily solved using the sequential gradient-restoration algorithm (SGRA) via a simple augmentation of the unknown parameter vector . Three example problems with bounded terminal conditions are solved to verify this technique.This research was supported in part by the National Aeronautics and Space Administration under NASA Grant No. NCC 2-106.     

Partial least-squares regression and fuzzy clustering — A joint approach

Chemical and physical analyses of malt, the main ingredient of beer, have been used to predict the concentration of certain volatile compounds in the finished beer.The prediction was done by means of the partial least squares regression (PLS2) in SIMCA. The total data set as well as individual malt clusters were submitted to PLS analysis. Best prediction was obtained by separating the total object matrix in classes according to similarity found by fuzzy pattern recognition (FCV). FCV was also used to separate the beer variables in classes and to select the subset of variables to be predicted.A joint approach of fuzzy pattern recognition to identify groups of samples and SIMCA-PLS2 to predict several dependent variables is suggested as a powerful tool in process-analytical chemistry.     

Structure inhomogeneities of medium-range order in fluorozirconate glasses

Images of cleaved surfaces were obtained for 53ZrF₄-20BaF₂-4LaF₃-3AlF₃-20NaF (ZBLAN) glasses and fused quartz using an NTMDT atomic force microscope. It is shown that the scatter of particle size depends on the cooling rate and is 21–48.5 Å for the cleaved surface of ZBLAN glass obtained by very fast cooling and 68–172 Å for the cleaved surface of ZBLAN after slow cooling. For cleaved fused quartz, the range is 25-18 Å.     

Elektronenlokalisierung im Grundzustand und in angeregten Zuständen Pars-Orbital-Methode, 12. Mitt

UsingGleason's theorem the pars orbital concept is developed for excited states of conjugated systems described by CI-methods. A significance index is introduced to evaluate different patterns of fragmentation. The usefulness of this approach is illustrated for butadiene, biphenyl, naphthalene, and azulene.

11. Mitt.:H. Karpf, O. E. Polansky undM. Zander, Tetrahedron Lett.1978, 2069.     

Sedimentation and drying dissipative structures of colloidal silica (1.2 μm in diameter) suspensions in a glass dish and a polystyrene dish

Sedimentation and drying dissipative structural patterns formed in the course of drying colloidal silica spheres (1.2 μm in diameter) in aqueous suspension have been studied in a glass dish and a polystyrene dish. The broad ring patterns are formed within a short time in suspension state by the convection flow of water and colloidal spheres. The broad ring patterns are not formed when a dish is covered with a cap, which demonstrates the important role of the convectional flow of silica spheres and water accompanied with the evaporation of water on the air-suspension interface. The sedimentary spheres always move by the convectional flow of water, and the broad ring patterns became sharp with time. Broad ring and microscopic fine structures are formed in the solidification processes on the bases of the convectional and sedimentation patterns. Drying patterns of the colloidal suspensions containing sodium chloride are star-like ones, which strongly supports the synchronous cooperative interactions between the salt and colloidal spheres.     

Controllable and flexible cellular network for virus cell-to-cell spread

Cellular networks were constructed based on PEG modification and soft lithography, in which cell numbers and spatial distributions can be controlled. A micro-injector was combined with cellular networks to fix virus induced plaque and virus spread direction, by which virus cell-to-cell spread can be distinguished from cell-free spread.     

The impact of flow injection on modern chemical analysis: has it fulfilled our expectations? And where are we going?

Presenting a condensation of the opening lecture of the 12th ICFIA conference, this communication presents a view of the impact that flow injection analysis (FIA) has had on modern analytical chemistry, evaluated both within the academic community and outside it, i.e. in “industry”. The ensuing developments of FIA, encompassing sequential injection analysis (SIA) and bead injection lab-on-valve (BI-LOV), are described and their individual features discussed. Finally, some recent results of the activities from the author’s own research group are briefly mentioned.     

径向基-偏最小二乘-贝叶斯方法及其在化学模式分类中的应用

提出一种用于模式分类的RBF-PLS—Bayes方法。它集成地应用径向基(RBF)变换与偏最小二乘(PLS)方法，从原有模式中提取出分类能力甚强的成分，然后进行贝叶斯(Bayes)判别。这种集成方法尤其适用于复杂化学信息的模式分类，本文将其应用于两种类型的化学模式分类问题，均取得了令人满意的效果。与经典的判别分析方法和单纯的神经网络方法相比，具有明显的优越性。