Development of an automated sequential injection on-line solvent extraction-back extraction procedure as demonstrated for the determination of cadmium with detection by electrothermal atomic absorption spectrometry

An automated sequential injection (SI) on-line solvent extraction-back extraction separation/preconcentration procedure is described. Demonstrated for the assay of cadmium by electrothermal atomic absorption spectrometry (ETAAS), the analyte is initially complexed with ammonium pyrrolidinedithiocarbamate (APDC) in citrate buffer and the chelate is extracted into isobutyl methyl ketone (IBMK), which is separated from the aqueous phase by means of a newly designed dual-conical gravitational phase separator. A metered amount of the organic eluate is aspirated and stored in the PTFE holding coil (HC) of the SI-system. Afterwards, it is dispensed and mixed with an aqueous back extractant of dilute nitric acid containing Hg(II) ions as stripping agent, thereby facilitating a rapid metal-exchange reaction with the APDC ligand and transfer of the Cd into the aqueous phase. The aqueous phase is separated in a second dual-conical gravitational phase separator, and 30 μl of it is entrapped and metered in a sample loop (SL) and subsequently introduced via air segmentation into the graphite tube for analyte quantification. The ETAAS determination is performed in parallel with the separation/preconcentration process of the ensuing sample. An enrichment factor of 21.4, a detection limit of 2.7 ng l⁻¹, along with a sampling frequency of 13 h⁻¹ were obtained at a sample flow rate of 6.0 ml min⁻¹. The precision (R.S.D.) at the 0.4 μg l⁻¹ level was 1.8% as compared to 3.2% when quantifying the organic extractant directly. The applicability of the procedure is demonstrated for the determination of trace levels of cadmium in three certified reference materials.     

Application of a sequential extraction procedure to study the release of elements from municipal solid waste incineration bottom ash

The release of five elements (Cr, Cu, Mn, Pb and Zn) from a municipal solid waste incineration bottom ash (BA) under different extraction conditions has been investigated by performing the three-step sequential extraction procedure proposed by the Standards, Measurements and Testing Program of the European Union. A fourth step (strong acid attack) has been added in order to calculate the mass balance. The results of this study provide information on the potential mobility of the studied elements. Almost all of the Cr and part of the Mn are extracted with strong acid which indicates low potential mobility in the environment. Most of the Cu is extracted under oxidizing conditions. Pb and Zn are released under acidic condition, indicating the possibility of their mobilization by changes in pH. The reproducibility of the sequential extraction procedure is also discussed.     

Sequential injection analysis system for on-line monitoring of l-cysteine concentration in biological processes

A sequential injection analysis (SIA) system was developed to monitor the concentration of l-cysteine in biological processes on-line. It is based on the redox reaction of l-cysteine with iron(III) in the presence of 1,10-phenanthroline (phen) and the detection of the red-iron(II)-phen complex with a spectrophotometry. The system was fully automated using software written in the LabVIEW™ development environment. A number of system variables such as the flow rate of the carrier buffer solution, the volume ratio of the sample to the reagents, and the reaction coil length, etc., were evaluated to increase the sensitivity and performance of the SIA system. Under partially optimized operating conditions the performance of the SIA system was linear up to a concentration of l-cysteine of 1 mM (R² = 0.998) with a detection limit of 0.005 mM and a sample frequency of 15 hr⁻¹. The SIA system was employed to monitor the concentration of l-cysteine on-line in a continuously stirred reactor and a fermentation process of Saccharomyces cerevisiae. The on-line monitored data were in good agreement with the off-line data measured by a HPLC with a fluorescence detector (n = 15, R² = 09899).     

A sequential reaction process to assemble polysubstituted indolizidines, quinolizidines and quinolizidine analogues

The ω-iodo-α,β-alkynoates and their ketone, sulfone or phosphonate analogues react with δ-chloropropylamines in MeCN assisted with K₂CO₃ to undergo a sequential S_N2/Michael addition/S_N2/S_N2 reaction process, giving polysubstituted indolizidines or quinolizidines in good to excellent yields. This sequential reaction process is also compatible with three other substituted α,β-alkynoates, affording quinolizidine analogues in moderate to good yields.     

Exploiting flow injection and sequential injection anodic stripping voltammetric systems for simultaneous determination of some metals

Flow injection (FI) and sequential injection (SI) systems with anodic stripping voltammetric detection have been exploited for simultaneous determination of some metals. A pre-plated mercury film on a glassy carbon disc electrode was used as a working electrode in both systems. The same film can be repeatedly applied for at least 50 analysis cycles, thus reducing the mercury consumption and waste. A single line FI voltammetric system using an acetate buffer as a carrier and an electrolyte solution was employed. An injected standard/sample zone was mixed with the buffer in a mixing coil before entering a flow cell. Metal ions were deposited on the working electrode by applying a potential of −1.1 V vs Ag/AgCl reference electrode. The stripping was performed by anodically scanning potential of working electrode to +0.25 V, resulting a voltammogram. Effects of acetate buffer concentration, flow rate and sample volume were investigated. Under the selected condition, detection limits of 1 μg l⁻¹ for Cd(II), 18 μg l⁻¹ for Cu(II), 2 μg l⁻¹ for Pb(II) and 17 μg l⁻¹ for Zn(II) with precisions of 2–5% (n=11) were obtained. The SI voltammetric system was similar to the FI system and using an acetate buffer as a carrier solution. The SI system was operated by a PC via in-house written software and employing an autotitrator as a syringe pump. Standard/sample was aspirated and the zone was then sent to a flow cell for measurement. Detection limits for Cd(II), Cu(II), Pb(II) and Zn(II) were 6, 3, 10 and 470 μg l⁻¹, respectively. Applications to water samples were demonstrated. A homemade UV-digester was used for removing organic matters in the wastewater samples prior to analysis by the proposed voltammetric systems.     

Sequential injection system with higher dimensional electrochemical sensor signals Part 1. Voltammetric e-tongue for the determination of oxidizable compounds

A sequential injection analysis (SIA) system was developed with the aim of obtaining an automatic and versatile way to prepare standards needed in the study of systems with higher dimensional sensor signals. To illustrate this, different analytical techniques were used in determinations of several analytes. Automated potentiometric calibrations of different potentiometric sensors, with and without interference, were carried out. Useful determinations of selectivity coefficients with two degrees of freedom were obtained. Simultaneous voltammetric determinations have also been done. Firstly, simultaneous determinations of lead and cadmium, using epoxy-graphite composite as the working electrode, have enabled a separate calibration for each metal to be obtained. Next, a voltammetric electronic tongue was designed and applied to the determination of oxidizable species. The use of artificial neural networks has solved the overlapped signal of ascorbic acid, 4-aminophenol and 4-acetamidophenol (paracetamol). A set of 63 data points was prepared automatically and has facilitated the training of an electronic tongue for these three analytes. Accurate predictions of test solutions, in the range of 12–410 μM for ascorbic acid, 17–530 μM for 4-aminophenol and 10–420 μM for paracetamol, have been achieved with RMSEs lower than 0.10 μM.     

A comparison of sequential extraction techniques for determining arsenic fractionation in synthetic mineral mixtures

The sequential extraction methods according to Tessier et al. [1], Borovec et al. [2], Zhang and Moore [3] and Hall et al. [4] have been tested for their suitability for arsenic fractionation in samples of artificially prepared mineral mixtures. Mixtures containing different amounts of As-containing phases were prepared so that their compositions corresponded to weathering products on As-bearing ore deposits. A comparison of different procedures on simple mineral mixtures containing calcium arsenate (CaHAsO₄·H₂O), As-bearing goethite (FeOOH) and arsenopyrite (FeAsS) showed that only the results of the Hall method satisfactorily correspond to the expected arsenic distribution. A detailed verification of the Hall method was subsequently carried out on most complex synthetic mineral mixtures with varying amounts of As-containing kaolinite and carbonate, calcium arsenate, As-bearing goethite and arsenopyrite. The results confirm that the Hall method cannot be fully employed for an accurate As speciation but may be applied for a route identification of As distribution between "labile", "medium-labile" and "residual" forms in heavily polluted soils.     

Hyphenation of flow injection/sequential injection with chemical hydride/vapor generation atomic fluorescence spectrometry

The dominant role played by flow injection/sequential injection (FI/SI, including lab-on-valve, LOV) in automatic on-line sample pretreatments coupling to various detection techniques is amply demonstrated by the large number of publications it has given rise to. Among these, its hyphenation with hydride/vapor generation atomic fluorescence spectrometry (HG/VG-AFS) has become one of the most attractive sub-branches during the last years, attributed not only to the high sensitivity of this technique, but also to the superb separation capability of hydride/vapor forming elements from complex sample matrices. In addition, it also provides potentials for the speciation of the elements of interest.It is worth mentioning that quite a few novel developments of sample pretreatment have emerged recently, which attracted extensive attentions from the related fields of research. The aim of this mini-review is thus to illustrate the state-of-the-art progress of implementing flow injection/sequential injection and miniaturized lab-on-valve systems for on-line hydride/vapor generation separation and preconcentration of vapor forming elements followed with detection by atomic fluorescence spectrometry, within the period from 2004 up to now. Future perspectives in this field are also discussed.     

Sequential injection analysis with dynamic surface tension detection High throughput analysis of the interfacial properties of surface-active samples

A sequential injection analysis (SIA) system is coupled with dynamic surface tension detection (DSTD) for the purpose of studying the interfacial properties of surface-active samples. DSTD is a novel analyzer based upon a growing drop method, utilizing a pressure sensor measurement of drop pressure. The pressure signal depends on the surface tension properties of sample solution drops that grow and detach at the end of a capillary tip. In this work, SIA was used for creating a reagent concentration gradient, and for blending the reagent gradient with a steady-state sample. The sample, consisting of either sodium dodecyl sulfate (SDS) or poly(ethylene glycol) at 1470 g mol⁻¹ (PEG 1470), elutes with a steady-state concentration at the center of the sample plug. Reagents such as Brij®35, tetrabutylammonium (TBA) hydroxide and β-cyclodextrin were introduced as a concentration gradient that begins after the sample plug has reached the steady-state concentration. By blending the reagent concentration gradient with the sample plug using SIA/DSTD, the kinetic surface pressure signal of samples mixed with various reagent concentrations is observed and evaluated in a high throughput fashion. It was found that the SIA/DSTD method consumes lesser reagent and required significantly less analysis time than traditional FIA/DSTD. Four unique chemical systems were studied with regard to how surface activity is influenced, as observed through the surface tension signal: surface activity addition, surface activity reduction due to competition, surface activity enhancement due to ion-pair formation, and surface activity reduction due to bulk phase binding chemistry.     

Effect of chloride on heavy metal mobility of harbour sediments

To evaluate the environmental impact of polluted sediments, several operationally defined sequential extraction procedures (SEPs) have been described. Salinity has long been recognised as an important variable determining the physicochemical behaviour of heavy metals in marine sediments. Thus, in the present paper, the modified BCR-SEP has been applied to harbour sediments in order to assess to what extent trace metal mobility (Cd, Cr, Cu, Ni, Pb and Zn) could be influenced by chloride content in sediments. For this, washed (W) and non-washed (NW) sediments were compared. The relative mobility order observed for the six trace metals studied was not seen to be influenced by the presence of chloride in the sediments, but an increase of mobility was observed for Cd and Zn (the most mobile metals) when chloride was present in the sediments. Characterisation of the sediments and of the pseudo-total metal contents by means of an aqua regia extraction was also assessed.