基于STM32F407的以太网通信模块设计

物联网的大规模形成和高速发展,使得基于以太网通信的嵌入式系统开发成为物联网应用的一个实际课题。本论文设计了一种以STM32F407作为主处理器的以太网通信模块;利用32位闪存微控制器STM32F407与以太网模块CH395实现串口通信;采用CH395控制芯片内置的TCP/IP协议栈与上位机LabVIEW客户端建立数据通信,并实时发送测试数据进行实验研究。实测结果表明：基于STM32F407的以太网通信嵌入式系统工作稳定,数据传输可靠,能够满足系统设计需求。     

基于S域RLC传输线模型的多芯片组件互连功耗计算

为了分析多芯片组件的互连功耗,用RLC传输线模型对多芯片组件的互连进行表征,通过对输入互连的电流及其等效电阻的近似,推导出多芯片组件互连功耗的频域数学表达式,给出计算机仿真试验结果,对方法的有效性进行验证.     

ITERʵ�����ƻ�����

简要介绍了ITER计划的发展历程;综述了ITER实验包层模块计划(ITER-TBM)的历史、主要技术路线和最新的设计与研发进展;概述了与实验包层计划相关的DEMO聚变堆的定义与发展策略。最后,介绍了国内开展的基于固体增殖剂概念的ITER实验包层的初步设计概况,对TBM的研发计划提出了建议。     

飞控系统控制信息自动采集处理模块与自测试设计

介绍一种机载飞控系统飞控计算机对各种控制信息（包括离散量、模拟量和串行数据）进行数字化控制、实时采集、监控和处理的接口模块设计方法,从工程应用角度出发,阐述了模块的设计思路以及工程实现,给出原理框图和测试流程。在某型飞机的实际应用中,实现了32路离散量输入输出、16路模拟量输入输出、6路ARINC429串行数据收发、4路ARINC422串行数据收发以及4路ARINC232串行数据收发的功能,自测试覆盖率达100%。因该模块的接口形式和接口数量可根据实际需要进行增减,故具有很强的典型性和通用性,可适用于各类型的机载飞控系统。     

Dynamic thermal modeling and parameter identification for a monolithic laser diode module

We improved the thermal equivalent-circuit model of the laser diode module(LDM) to evaluate its thermal dynamic properties and calculate the junction temperature of the laser diode with a high accuracy.The thermal parameters and the transient junction temperature of the LDM are modeled and obtained according to the temperature of the thermistor integrated in the module.Our improved thermal model is verified indirectly by monitoring the emission wavelength of the laser diode against gas absorption lines,and several thermal parameters are obtained with the temperature uncertainty of 0.01 K in the thermal dynamic process.     

切变模量和转动惯量实验的改进

设计了一种基于垂直轴定理的新型吊钩,对切变模量和转动惯量实验进行了改进,使之成为既可测定金属丝切变模量和环、柱等刚体的转动惯量,又可验证反映转动惯量重要性质的平行轴定理及垂直轴定理的多功能实验仪.     

光模块消光比的补偿方法

提出了一种新型光模块消光比补偿方法。该方法首先根据不同温度下驱动芯片上报电流的大小,结合光功率和消光比的计算公式,模拟出激光器光功率随电流及电压的变化曲线。然后根据要求调整激光器调制电流的大小,以保持消光比的稳定。该补偿方式有效地解决了光器件一致性较差的问题,可以将原来斜效率的指标适当放宽10%,从而提高了利用率和成品率,降低了模块生产成本。     

新型高时间分辨的光扫描模块偏转特性

随着惯性约束聚变研究的深入发展,对高精密诊断设备的要求越来越高,基于半导体材料的光致折射率变化这一特性,对新型高时间分辨的全光扫描技术进行了深入研究。重点介绍了影响光扫描模块偏转特性的两大关键技术,即光扫描模块的设计以及泵浦光与信号光时间同步。通过分解实验开展验证性研究,结果表明：通过前期设计制作的光扫描模块可较好地应用于实验中,在一定范围内,泵浦光功率密度越大信号光的偏转也就越大。同时,时间同步对信号光的偏转程度影响也较大,即高时间同步关系也决定了光扫描装置的时间分辨率。     

基于单片机和光电开关的通用计数器设计

At presrent, the photoelectric switch is more and more widely used in the industrial automation equipment.It can be finished counting industrial products by using the characteristic of the photoelectric switch which can detect the objects without touching them. This design uses the modular design method,including power-supply module, The photoelectric conversion module, optocoupler isolation circuit module, power off protection module, matrix keyboard module, counting module and The display module. It mainly uses 51 single-chip microcomputer to control the system,uses the keilC51 software to design program,uses the Proteus software to complete the simulation. Through the experiment, it proves the design is feasible.     

Validation of an optimization procedure to improve low frequency characteristics of rooms

A set of experiments was carried out to validate an optimization procedure based on finite element method (FEM). The idea of the procedure, fully presented in previous edition of this journal [Zhu X, Zhu Z, Cheng J. Using optimized surface modifications to improve low frequency response in a room. Appl Acoust 2004;65:841-60], is to produce an optimal geometry modification on the wall for improving low frequency sound uniformity in small rooms. Four experimental models were set up with a scale of 1:5. One was modified according to the optimized result and the others were treated with no optimization consideration. Measured frequency responses of four rooms were compared with numerical results calculated by FEM models. The transient responses in these rooms were also measured and analyzed. The agreements between calculation and measurement are satisfactory though the discrepancies due to the uncertainty of acoustic behavior of the room boundaries remain. The optimization procedure has been supported by the results that the optimized room produces the flattest frequency response and also the most smooth energy decay within the frequency range studied. The reductions of response fluctuation have reached 4.3 dB for prediction and 2.6 dB for measurement, respectively.