Capillary gas chromatography of lower aliphatic C2?C5 aldehydes in the free form as a group of pungent odorants in air

The capillary gas chromatography of the C₂-C₅ lower aliphatic aldehydes (e.g.,acetaldehyde, propionaldehyde, n- and i-butyraldehydes, n- and i-valeraldehydes) which, in the free form in air, have unpleasant odors and low threshold odor values, has been studied using cold-trap preconcentration with liquid oxygen. The capillary column outlet was connected to enable simultaneous detection by FID, ECD, FPD AND FTD (SID).     

离子液体[BMim]BF4对SDS水溶液表面活性和聚集能力的促进

采用表面张力测定法和核磁共振谱等方法研究了阴离子表面活性剂十二烷基硫酸钠(SDS)在水溶性室温离子液体[BMim]BF4/水混合溶剂中的表面性质及聚集行为, 发现极少量[BMim]BF4的介入就可以显著降低SDS的临界胶束浓度, 提高体系的表面活性; 且[BMim]BF4在混合溶剂中所占的摩尔分数(x1)在一定范围内(0相似文献   

Multivariate comparison of concentration profiles in materials analysis

Hierarchical cluster analysis (HCA) and principal components analysis (PCA) were applied to find groups between similar depth-profiles in thin-layers investigated by Rutherford backscattering spectrometry (RBS).HCA yields in one run an objective hierarchy of similarity for several profiles. Among the similarity coefficients examined the linear measure, the Euclidean distance and the exponential measure respond with different sensitivity to overall shifts in direction of the concentration axis, whereas the correlation measure relates to parallelism of the profiles.For agglomerative HCA with Euclidean distance, a lowest significant linkage level has been defined by use of Fisher'sF-test. For divisive HCA based also on Euclidean distance, the maximum of a separating function marks the most separating cluster step. The outcomes of both proposals agree for the data set investigated.PCA is useful for verifying the results of HCA and yields additional information about the data structure. In the actual example quite different positions of features (concentrations at definite depths) in the space of the two first principal components hint at peculiarities during the metallurgical coating process.     

A proton NMR study on aggregation of cationic surfactants in water: effects of the structure of the headgroup

 ¹H NMR chemical shifts of solutions of the following cationic surfactants in D₂O were determined as a function of their concentrations: cetyltrimethylammonium chloride, CTACl, a 1 : 1 molar mixture of CTACl and toluene, cetylpyridinium chloride, CPyCl, cetyldimethylphenylam-monium chloride, CDPhACl, cetyldimethylbenzylammonium chloride, CDBzACl, cetyldimethyl-2-phenylethylammonium chloride, CDPhEtACl, and cetyldimethyl-3-phenylpropylammonium chloride, CDPhPrACl. Plots of observed chemical shifts versus [surfactant] are sigmoidal, and were fitted to a model based on the mass-action law. Satisfactory fitting was obtained for the discrete protons of all surfactants. From these fits, we calculated the equilibrium constant for micelle formation, K, the critical micelle concentration, CMC and the chemical shifts of the monomer, δ_mon and the micelle δ_mic. ¹H NMR-based CMC values are in excellent agreement with those which we determined by surface tension measurements of surfactant solutions in H₂O, allowing for the difference in structure between D₂O and H₂O. Values of K increase as a function of increasing the size of the hydrophilic group, but the free energy of transfer per CH₂ group of the phenylalkyl moiety from bulk water to the micellar interface is approximately constant, 1.9±0.1 kJ mol^-1. Values of (δ_mic–δ_mon) for the surfactant groups at the interface, e.g., CH₃–(CH₂)₁₅–N+(CH₃)₂ and within the micellar core, e.g., CH₃–(CH₂)₁₅–N⁺ were used to probe the (average) conformation of the phenyl group in the interfacial region. The picture that emerges is that the aromatic ring is perpendicular to the interface in CDPhACl and is more or less parallel to it in CDBzACl, CDPhEtACl, and CDPhPrACl. Received: 23 February 1996 Accepted: 29 August 1996     

ELECTROCHEMICAL POLYMERIZATION OF ANILINE IN PHOSPHORIC ACID AND THE PROPERTIES OF POLYANILINE

The behavior of the electrochemical polymerization of aniline in a weak acid, phosphoric acid, is very similar to that in strong acids, i.e. its polymerization rate increases quickly with the electrolysis time. The FTIR spectra of polyaniline samples synthesized in phosphoric acid indicate that the counter ion H2PO4^- is present in both the oxidized form and the reduced form of polyaniline. The counter ion plays an important role in adjusting the pH value at the electrode surface of polyaniline during the oxidation and reduction processes. As a result, a pair of redox peaks still appear in cyclic voltammograms of polyaniline in a solution of sodium sulfate of pH 5.5 and in a solution of NaH2PO4 of pH 7.0,respectively, at low potential scan rate; and the color of polyaniline film also changes with applied potential at pH 7.0. Thus,the pH region for the electrochemical activity and the electrochromism of polyaniline is extended to pH 5.5 for a solution of sodium sulfate and to pH 7.0 for a solution of NaH2PO4. The conductivity of polyaniline is 3.3 S cm^-1, depending on the concentration of phosphoric acid used in the stage of polymerization of aniline. The result of elemental analysis of polyaniline is presented here.     

Prediction of retention time of phenols in liquid chromatography

The chromatographic behavior of phenols in reversed-phase mode liquid chromatography differs from that of non-ionic compounds such as alkyl alcohols, alkylbenzenes, halogenated benzenes, polyaromatic hydrocarbons, and aromatic acids. Therefore, the retention times of 61 phenols were measured in a system of an octadecyl bonded silica gel and acetonitrile/water mixtures. The logarithm of the capacity ratio (log k') was found to be a linear function of the hydrophobicity (log P) in acidic acetonitrile/water mixtures. This result was applied to a different octadecyl bonded silica gel. Eight phenols were selected as standard compounds, and their log k' values were measured in 0.05 M phosphoric acid in 10 to 90% acetonitrile/water mixtures. An empirical polynomial relation was obtained between the concentration of acetonitrile and the slope of the log k' vs log P curve. Finally the capacity ratio of all phenols were calculated in given eluents by the equations derived from the measurements of standard compounds and the calculated log P values. The difference between predicted capacity ratios and measured ones was within 10%.     

Temperature dependence of second critical micelle concentration of dodecyldimethylbenzylammonium bromide in aqueous solution

The specific conductivity of dodecyldimethylbenzylammonium bromide (C12BBr) in aqueous solutions, in the temperature range of 15 to 40 °C, has been measured as a function of molality. The two breaks which were found on the conductivity against molality plots were attributed to the critical micelle concentration, cmc, and second critical micelle concentration, 2^nd cmc, respectively. The ratio of the slopes, S, of the three linear fragments on the plots, S2/S1 and S3/S1, was attributed to the degree of ionization of the micelles at cmc and 2^nd cmc respectively. It was shown that the values of the 2^nd cmc estimated above 27 °C are only apparent due to thermal disintegration of the micelles. In the temperature range of 15 to 27 °C, the values of the 2^nd cmc increase gradually and the plot of the 2^nd cmc against temperature is concave. The ratio of 2^nd cmc/cmc for C12BBr at 25 °C amounts to 15 and appears to be high compared to the literature values for other surfactants. For comparative purposes the cmc and 2^nd cmc values were also estimated conductometrically for decyldimethylbenzylammonium bromide (C10BBr) at 25 °C. The 2^nd cmc value for this surfactant is higher compared to the value for the C12 homologue by a factor of 2.6.The standard Gibbs free energies of micellization at cmc and at the 2^nd cmc were estimated from the experimental data for both surfactants at 25 °C.     

Assessment of various carbon sources and nutrient feeding strategies for Panax ginseng cell culture

Ginseng (root of Panax ginseng C. A. Meyer) cells were cultivated on medium supplemented with various carbohydrates including sucrose, glucose, and fructose, at initial concentrations ranging from 10 to 110 g/L. Sucrose was shown to be the superior carbon source to the monosaccharides for ginseng cell growth and the optimal concentration was between 30 and 50 g/L. An increase in the initial concentration within this range increased the maximum cell density and growth index significantly, whereas much higher concentrations inhibited cell growth. Feeding of sucrose and some other medium components during the growth (fed-batch mode) was more effective in enhancing the cell growth and biomass productivity, increasing the growth index by more than 60–70% and biomass productivity by more than 50%.     

吸附伏安法测定表面活性剂的临界胶束浓度

以易溶于有机溶剂，微溶于水的氧化－还原指示剂中性红为探针，用吸附伏安法测定了阴离子表面活性剂的临界胶束浓度。测量的基本原理是：存在于表面活性剂溶液中的微量中性红在悬汞电极上的吸附伏安峰电流对表面活性剂浓度的曲线在临界胶束浓度处有一拐点。