Simultaneous emissions from T2 and T1 states of naphthalene moiety in a specially designed naphthalene cryptand

We report here the photophysical properties of a naphthalene derivative of a specially designed cryptand system (L). The system exhibits the unusual phenomenon of emission from T₂ and T₁ states of naphthalene which has been attributed to the inherent rigidity of the system. The results obtained have been analysed by comparison with two other model systems where the flexibility of the fluorophore unit with respect to the receptor moiety have been varied.     

Precise measurement of soil deformation and fluctuation in drawbar pull for steel and rubber-coated rigid wheels

The travelling performance of rigid wheels on sand stratum is measured using two kinds of surface material, i.e. steel and steel coated with rubber. A new method for measuring the displacement of soil beneath the wheel has been developed using small polyester film markers. The trajectories of soil particles beneath the wheels are approximated by an exponential function and the fluctuations in the drawbar pull are represented by a sinusoidal function. The amplitude and basic wavelength of the fluctuation in the drawbar pull are discussed for both types of wheels.     

利用光学显微镜研究溶剂诱导的梯形苯基聚倍半硅氧烷结晶

通过溶剂诱导结晶的方法研究了梯形苯基聚倍半硅氧烷(PPSQ)的球晶结构. 采用光学显微镜研究了溶液的浓度、溶剂的挥发时间以及温度等影响因素对梯形苯基聚倍半硅氧烷的球晶结构形貌的影响. 实验结果表明:稀释溶液浓度与提高结晶温度在改变球晶的形态方面具有相同的效果. 球晶的尺寸会随着溶液浓度的降低或者结晶温度的升高而增加. 这都归因于梯形苯基聚倍半硅氧烷在二甲苯中的溶解度的增加. 在不改变其它结晶条件的情况下,延长溶剂的挥发时间也会形成更大的球晶. 当在光学显微镜下旋转样品时球晶的结构不会发生改变,这表明球晶具有均一的晶体学取向结构. 负性球晶的特征也表明梯形苯基聚倍半硅氧烷的分子链是沿着球晶的切线方向排列. 考虑到梯形苯基聚倍半硅氧烷具有刚性的分子链,还提出了梯形苯基聚倍半硅氧烷可能的球晶结构模型.     

非弹性体增韧—聚合物增韧的新途径

本文是一篇关于非弹性增韧方法的综述。文章首先简要回顾了传统的橡胶增韧韧性聚合物材料的机理,然后着重介绍了最近在国外出现的刚性有机填料(ROF)增韧的基本概念、分析方法和增韧的冷拉机理,列举了脆性塑料粒子和韧性基体组成的合金体系的大量实验结果来说明以上内容,最后通过与传统橡胶增韧机理的对比指出非弹性体增韧是不同于后者的一种新增韧方法,并有可能成为制备高强度、高韧性工程塑料的一种新途径。     

缩聚合成聚芳酯和聚酯－聚醚弹性体的微相复合物

通过原位直接缩聚反应，制备了刚性棒状聚对羟基苯甲酸酯（ＰＨＢ）和聚对苯二甲酸丁二醇酯－聚四亚甲基醚多嵌段共聚物（ＰＢＴ－ＰＴＭＧ）的微相复合物．复合物可溶于氯仿等溶剂，可以浇铸成膜．本文研究了ＰＨＢ含量和聚合过程中，基体聚合物溶液浓度对微相复合物形态以及力学性能影响．同共混法相比，原位缩聚法可得到分散更均匀，力学性能更优良的微相复合物．     

Single molecule study of DNA collision with elliptical nanoposts conveyed by hydrodynamics

Periodic arrays of micro‐ or nanopillars constitute solid‐state matrices with excellent properties for DNA size separation. Nanofabrication technologies offer many solutions to tailor the geometry of obstacle arrays, yet most studies have been conducted with cylinders arranged in hexagonal lattices. In this report, we investigate the dynamics of single DNA collision with elliptical nanoposts using hydrodynamic actuation. Our data show that the asymmetry of the obstacles has minor effect on unhooking dynamics, and thus confirm recent predictions obtained by Brownian dynamics simulations. In addition, we show that the disengagement dynamics are correctly predicted by models of electrophoresis, and propose that this consistency is associated to the confinement in slit‐like channels. We finally conclude that elliptical posts are expected to marginally improve the performances of separation devices.     

结晶高分子非晶区的结构及其动力学行为研究进展

非晶结构对结晶高分子材料结构和最终使用性能有非常重要的影响,但目前对半晶高分子中非晶结构的认识还不太清晰并且有待进一步完善.随着研究手段的发展,结晶高分子中非晶区结构及其动力学行为的研究受到越来越多的关注.本文简要概述了目前对结晶高分子中非晶相的研究进展,主要从结晶高分子中非晶区的结构﹑结晶高分子中非晶区的松弛行为﹑非晶相对结晶高分子性能的影响以及等温结晶过程中非晶相的结构演化这四个方面进行介绍,并对它们的研究现状进行了概述,同时指出了目前在这方面研究中存在的争议和问题.     

Synthesis and characterization of expandable graphite-poly(methyl methacrylate) composite particles and their application to flame retardation of rigid polyurethane foams

The expandable graphite (EG) is well proved to be a good intumescent flame retardant for rigid polyurethane foam (RPUF), however, as it is pulverized into fine particles (pEG) for the purpose of improving the mechanical properties of the foam composite, the flame-retardant properties of pEG-filled RPUF (pEG/RPUF) are deteriorated. To improve both the mechanical properties and flame-retardant performance of pEG/RPUF composite, the pEG particles were encapsulated with a layer of polymer, poly(methyl methacrylate) (PMMA). The Fourier transform infrared spectroscopy (FTIR) examination, thermogravimetric analysis (TGA) and scanning electron microscopy (SEM) observation well demonstrated that the pEG-PMMA particles were successfully synthesized via emulsion polymerization, with 22.09 wt% PMMA. In contrast to the pEG, the addition of 10 wt% of pEG-PMMA particles into RPUF led to a considerable increase of the compressive strength and modulus and flame retardancy (limiting oxygen index, horizontal and vertical burning rates). The improvement of mechanical properties and flame-retardant behavior of pEG-PMMA particles filled RPUF was attributed to the desirable dispersion of pEG in PU matrix without destroying the integrality of the RPUF cell system, the good interfacial adhesion between PMMA and RPUF, and sealing the fine EG particles without losing oxidant, hence, to increase their expanded volume as exposed to fire.     

刚性聚合物稀溶液流变性质的计算 Ⅱ.非定常流动

本文继续前一篇文章讨论描述刚性聚合物稀溶液流变性质的多棒刚杆分子模型,计算了应力发展的非定常剪切流动,结果表明,η~+将有所希望的“过冲”现象,且在无因次时间常数τ≥5后,流变性质达到定常均匀剪切流的结果,同时亦可方便地导得多球刚杆分子模型和无水学相互作用的刚性哑铃模型的结果。这些结果表明,此模型是较为完善的描述刚性聚合物稀溶液的分子模型。本文还对W_e≤0.7的情况作了深入的分析,比较了各阶近似解的计算结果。表明在W_e≤0.7时,用二阶近似解可代替高阶近似解计算,不会造成很大的误差,但可大大缩短计算时间。     

Frequency– and Time-domain BEM Analysis of Rigid Track on a Half-Space with Vibration Barriers

The rapid development of high-speed trains like the TGV or the ICE in recent years results in high dynamic loads causing vibrations which propagate from the train-track structure into the ground and further into nearby buildings. In this context it is important to develop rigid tracks with improved dynamic behaviour and to investigate possible means of vibration reduction. The boundary element method in frequency and time domain is used to simulate train-track structures subjected to dynamic loading and the reduction of vibrations which for instance can be achieved via a trench running parallel to the rigid track. In this context the non-causality error, which arises when the time-domain BEM algorithm is applied to mathematically concave domains, is discussed and the substructure method is proposed as a solution to this problem. A two-layered cylindrical elastic structure on a half-space with a trench is added as an example of a possible application.