Solubility and thermodynamics of solution of argon in aqueous solutions of sodium octanoate and sodium dodecylsulfate

The ostwald absorption coefficient of argon was measured in aqueous solutions of two surfactants; sodium n-octanoate and in sodium dodecylsulfate, at several concentrations and at a few temperatures between 10–25°C. The free energies, entropies and enthalpies of solution were computed. A tentative interpretation of the results is given, based on a competition between the solubilization and the salting-out effects of the surfactants.     

Boiling Temperature and Reversed Deliquescence Relative Humidity Measurements for Mineral Assemblages in the NaCl + NaNO3 + KNO3 + Ca(NO3)2 + H2O System

Boiling temperature measurements have been made at ambient pressure for saturated ternary solutions of NaCl + KNO₃ + H₂O, NaNO₃ + KNO₃ + H₂O, and NaCl + Ca(NO₃)₂ + H₂O over the full composition range, along with those of the single salt systems. Boiling temperatures were also measured for the four component NaCl + NaNO₃ + KNO₃ + H₂O and five component NaCl + NaNO₃ + KNO₃ + Ca(NO₃)₂ + H₂O mixtures, where the solute mole fraction of Ca(NO₃)₂, x{Ca(NO₃)₂}, was varied between 0 and 0.25. The maximum boiling temperature found for the NaCl + KNO₃ + H₂O system is ≈134.9 ^∘C; for the NaNO₃ + KNO₃ + H₂O system is ≈165.1 ^∘C at x(NaNO₃) ≈ 0.46 and x(KNO₃) ≈ 0.54; and for the NaCl + Ca(NO₃)₂ + H₂O system is 164.7 ± 0.6 ^∘C at x{NaCl} ≈ 0.25 and x{Ca(NO₃)₂} ≈ 0.75. The NaCl + NaNO₃ + KNO₃ + Ca(NO₃)₂ + H₂O system forms molten salts below their maximum boiling temperatures and the temperatures corresponding to the cessation of boiling (dry-out temperatures) of these liquid mixtures were determined. These dry-out temperatures range from ≈300 ^∘C when x{Ca(NO₃)₂} = 0 to ≥ 400 ^∘C when x{Ca(NO₃)₂} = 0.20 and 0.25. Mutual deliquescence/efflorescence relative humidity (MDRH/MERH) measurements were also made for the NaNO₃ + KNO₃ and NaCl + NaNO₃ + KNO₃ salt mixture from 120 to 180 ^∘C at ambient pressure. The NaNO₃ + KNO₃ salt mixture has a MDRH of 26.4% at 120 ^∘C and 20.0% at 150 ^∘C. This salt mixture also absorbs water at 180 ^∘C, which is higher than expected from the boiling temperature experiments. The NaCl + NaNO₃ + KNO₃ salt mixture was found to have a MDRH of 25.9% at 120 ^∘C and 10.5% at 180 ^∘C. The investigated mixture compositions correspond to some of the major mineral assemblages that are predicted to control brine composition due to the deliquescence of salts formed in dust deposited on waste canisters in the proposed nuclear repository at Yucca Mountain, Nevada.     

Computation of efficient solutions of discretely distributed stochastic optimization problems

In engineering and economics often a certain vectorx of inputs or decisions must be chosen, subject to some constraints, such that the expected costs (or loss) arising from the deviation between the outputA() x of a stochastic linear systemxA()x and a desired stochastic target vectorb() are minimal. Hence, one has the following stochastic linear optimization problem minimizeF(x)=Eu(A()x b()) s.t.xD, (1) whereu is a convex loss function on ^m , (A(), b()) is a random (m,n + 1)-matrix, E denotes the expectation operator andD is a convex subset of ⁿ . Concrete problems of this type are e.g. stochastic linear programs with recourse, error minimization and optimal design problems, acid rain abatement methods, problems in scenario analysis and non-least square regression analysis.Solving (1), the loss functionu should be exactly known. However, in practice mostly there is some uncertainty in assigning appropriate penalty costs to the deviation between the outputA ()x and the targetb(). For finding in this situation solutions hedging against uncertainty a set of so-called efficient points of (1) is defined and a numerical procedure for determining these compromise solutions is derived. Several applications are discussed.     

Electron Transport Properties of Ions in Aqueous Solutions of Sodium Selenite

Ion diffusion kinetics has been studied using the data of conductivity measurements for aqueous solutions of sodium selenite with different concentrations and at different temperatures. Molecular and ionic self-diffusion coefficients have been determined for infinitely dilute solutions in the temperature range 288 K-313 K. The limiting values of ion mobility and changes in the energies of translation of water molecules from ions’ hydration shell have been found. At elevated temperatures, ΔE _tr ⁰ increases for both ions in direct proportion to the crystallographic radius of the latter. Ion hydration numbers at 298 K have been calculated. The results of this study are interpreted in the light of Samoilov’s theory on positive and negative hydration of ions.Original Russian Text Copyright © 2004 by L. T. Vlaev and S. D. Genieva__________Translated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 5, pp. 870–876, September–October, 2004.     

Solubility of Solid 2-Methyl-1,3-butadiene (Isoprene) in Liquid Argon and Nitrogen at the Standard Boiling Points of the Solvents

The solubility of solid 2-methyl-1,3-butadiene (isoprene) in liquid argon at a temperature of 87.3 K and in liquid nitrogen at 77.4 K has been measured by the filtration method. The hydrocarbon contents in solutions were determined using gas chromatography. GC–MS was used to identify impurities in the solute. The experimental value of the mole fraction solubility of solid isoprene in liquid argon at 87.3 K is (1.41 ± 0.27) × 10^–6 and (1.56 ± 0.36) × 10^–7 in liquid nitrogen at 77.4 K. The Preston–Prausnitz method was used for calculation of the solubilities of solid hydrocarbon in liquid argon in the temperature range 84.0–110.0 K and in liquid nitrogen from 64.0 to 90.0 K. The solvent–solute interaction parameters l ₁₂ were also calculated. At 90.0 K liquid argon is a better solvent for isoprene than is liquid nitrogen. The experimental values of the solubilities of isoprene in liquid argon and nitrogen were compared with results obtained for selected unsaturated and aromatic hydrocarbons.     

Mechanism and kinetics of the reduction of In(III) ions at a polycrystalline gold electrode from highly concentrated ZnCl2 solutions

Summary The mechanism of the cathodic reduction of In(III) at gold has been studied by rotating disc and ring-disc voltammetry in highly concentrated aqueous ZnCl₂ solutions. At concentration of the base electrolyte higher than 7 mol dm^–3, the voltammetric curves recorded at the disc electrode split into two well-separated waves which correspond to the successive charge transfer reactions: In(III) + 2e^– In(I) and In(I) + e^– In. By the use of coulometric and potentiometric techniques, the formal potentials of the In(III)/In(I), In(III)/In and In(I)/In redox couples as well as the equilibrium constants of the reproportionation reaction In(III) + 2 In 3 In(I) has been determined and discussed. The kinetic parameters of the In(III)/In(I) electrode reaction have been also evaluated and discussed.

---

Mechanismus und Kinetik der Reduktion von In(III)-Ionen an der Goldelektrode in hochkonzentrierten wäßrigen ZnCl₂-Lösungen

Zusammenfassung Es wird der Mechanismus der Reduktion von In(III)-Ionen in hochkonzentrierten ZnCl₂ Lösungen mittels der Scheiben- und Ring-Scheiben-Elektrode aus Gold untersucht. Wenn die Konzentration des Grundelektrolyten 7 mol dm^–3 übersteigt, verteilen sich die erhaltenen Stromspannungskurven auf zwei gut gestaltete Stufen, die den konsekutiven Durchtrittsreaktionen In(III) + 2e^– In(I) und In(I) + e^– In entsprechen. Aufgrund der coulometrischen und potentiometrischen Messungen werden die Formal-Standardpotentiale der In(III)/In(I)-, In(III)/In-und In(I)/In-Redoxpaare, die Gleichgewichtskonstanten der Reproportionierungsreaktion In(III) + 2 In 3 In ermittelt. Die kinetischen Parameter der Durchtrittsreaktion In(III)/In(I) werden bestimmt und diskutiert.

     

Anomalies of the partition coefficient and properties of crystals in the region of low concentrations of an isomorphous admixture. 1. Unusual decomposition of solid solutions of the NaCl—CdCl2 system

Solid solutions NaCl—CdCl₂ were studied in an interval of CdCl₂ concentrations of 0.05—3 mol.% by Raman spectroscopy. The molecular form Na₂CdCl₄ decomposes: Na₂CdCl₄ 2Na⁺ + Cd²⁺ + 2Cl₂ ^– + 2e^–; 2Na + 2e^– 2Na⁰. Free sodium atoms form color centers of crystal (F centers) in the region of jumpwise changing the partition coefficient of CdCl₂ in NaCl (K jump).     

Surface forces in wetting films

A short review of various components of surface forces acting in a non-symmetrical system such as wetting films is presented here. Experimental results are compared with modified DLVO theory, which includes, besides dispersion and electrostatic, structural (solvation) forces caused by a change in liquid structure in conditions of confined geometry. The peculiarities of disjoining pressure isotherms and conditions of the film stability of non-polar and polar simple liquids, as well as of aqueous solutions of electrolytes and surfactants, are systematically considered from a historical perspective.     

Randomly transitional phenomena in the system governed by Duffing's equation

This paper deals with turbulent or chaotic phenomena which occur in the system governed by Duffing's equation, a special type of two-dimensional periodic system. By using analog and digital computers, experiments are carried out with special reference to the change of attractors and of average power spectra of the random processes under the variation of the system parameters. On the basis of the experimental results, an outline of the random process is made clear. The results obtained in this paper will be applied to various physical problems and will also serve as material for the development of a proper mathematics of this phenomenon.     

回旋速调管放大器输出腔的特性研究

 利用变截面波导的耦合模理论，根据输出腔中电场幅值分布函数所满足的微分方程组，编写了具有自动优化功能的计算程序，分析研究了不同渐变角度、考虑腔体损耗前后和输出腔与外电路失配时，谐振频率、腔体品质因数和高频场幅值沿轴分布的变化情况，为进一步研究高频场与电子注的互作用和输出腔奠定了基础。